diff mbox series

[v3,14/16] qla2xxx: Save frame payload size from ICB

Message ID 20180802201658.7903-15-himanshu.madhani@cavium.com (mailing list archive)
State Accepted
Headers show
Series qla2xxx: Updates for the driver | expand

Commit Message

Madhani, Himanshu Aug. 2, 2018, 8:16 p.m. UTC 
From: Quinn Tran <quinn.tran@cavium.com>

Save frame payload size from init control block.  This
field/data is used to register with switch data base.
This allow the init control block temp buf to be reuse

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
---
 drivers/scsi/qla2xxx/qla_def.h  | 1 +
 drivers/scsi/qla2xxx/qla_gs.c   | 4 +---
 drivers/scsi/qla2xxx/qla_init.c | 6 +++---
 3 files changed, 5 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 0fc563572fad..d1ff1b8f1ae5 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3848,6 +3848,7 @@  struct qla_hw_data {
 	atomic_t	num_pend_mbx_stage1;
 	atomic_t	num_pend_mbx_stage2;
 	atomic_t	num_pend_mbx_stage3;
+	uint16_t	frame_payload_size;
 
 	uint32_t	login_retry_count;
 	/* SNS command interfaces. */
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 5139a3577bb3..af9a75df6700 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -2134,9 +2134,7 @@  qla2x00_fdmiv2_rhba(scsi_qla_host_t *vha)
 	/* MAX CT Payload Length */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_MAXIMUM_CT_PAYLOAD_LENGTH);
-	eiter->a.max_ct_len = IS_FWI2_CAPABLE(ha) ?
-	    le16_to_cpu(icb24->frame_payload_size) :
-	    le16_to_cpu(ha->init_cb->frame_payload_size);
+	eiter->a.max_ct_len = cpu_to_be32(ha->frame_payload_size);
 	eiter->a.max_ct_len = cpu_to_be32(eiter->a.max_ct_len);
 	eiter->len = cpu_to_be16(4 + 4);
 	size += 4 + 4;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index c3c7aa1cb86e..471322c29db6 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4418,7 +4418,7 @@  qla2x00_nvram_config(scsi_qla_host_t *vha)
 	cnt = (uint8_t *)icb->reserved_3 - (uint8_t *)icb->add_firmware_options;
 	while (cnt--)
 		*dptr1++ = *dptr2++;
-
+	ha->frame_payload_size = le16_to_cpu(icb->frame_payload_size);
 	/* Use alternate WWN? */
 	if (nv->host_p[1] & BIT_7) {
 		memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
@@ -6893,7 +6893,7 @@  qla24xx_nvram_config(scsi_qla_host_t *vha)
 	    (uint8_t *)&icb->interrupt_delay_timer;
 	while (cnt--)
 		*dptr1++ = *dptr2++;
-
+	ha->frame_payload_size = le16_to_cpu(icb->frame_payload_size);
 	/*
 	 * Setup driver NVRAM options.
 	 */
@@ -7949,7 +7949,7 @@  qla81xx_nvram_config(scsi_qla_host_t *vha)
 
 	/* Use extended-initialization control block. */
 	memcpy(ha->ex_init_cb, &nv->ex_version, sizeof(*ha->ex_init_cb));
-
+	ha->frame_payload_size = le16_to_cpu(icb->frame_payload_size);
 	/*
 	 * Setup driver NVRAM options.
 	 */