@@ -170,7 +170,8 @@ enum vnic_devcmd_cmd {
/* variant of CMD_INIT, with provisioning info
* (u64)a0=paddr of vnic_devcmd_provinfo
- * (u32)a1=sizeof provision info */
+ * (u32)a1=sizeof provision info
+ */
CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27),
/* enable virtual link */
@@ -262,7 +263,125 @@ enum vnic_devcmd_cmd {
* non-zero for resetting vlan to the default
* out: (u16)a0=old default vlan
*/
- CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46)
+ CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46),
+
+ /* init_prov_info2:
+ * Variant of CMD_INIT_PROV_INFO, where it will not try to enable
+ * the vnic until CMD_ENABLE2 is issued.
+ * (u64)a0=paddr of vnic_devcmd_provinfo
+ * (u32)a1=sizeof provision info
+ */
+ CMD_INIT_PROV_INFO2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47),
+
+ /* enable2:
+ * (u32)a0=0 ==> standby
+ * =CMD_ENABLE2_ACTIVE ==> active
+ */
+ CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48),
+
+ /*
+ * cmd_status:
+ * Returns the status of the specified command
+ * Input:
+ * a0 = command for which status is being queried.
+ * Possible values are:
+ * CMD_SOFT_RESET
+ * CMD_HANG_RESET
+ * CMD_OPEN
+ * CMD_INIT
+ * CMD_INIT_PROV_INFO
+ * CMD_DEINIT
+ * CMD_INIT_PROV_INFO2
+ * CMD_ENABLE2
+ * Output:
+ * if status == STAT_ERROR
+ * a0 = ERR_ENOTSUPPORTED - status for command in a0 is
+ * not supported
+ * if status == STAT_NONE
+ * a0 = status of the devcmd specified in a0 as follows.
+ * ERR_SUCCESS - command in a0 completed successfully
+ * ERR_EINPROGRESS - command in a0 is still in progress
+ */
+ CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49),
+
+ /*
+ * Returns interrupt coalescing timer conversion factors.
+ * After calling this devcmd, ENIC driver can convert
+ * interrupt coalescing timer in usec into CPU cycles as follows:
+ *
+ * intr_timer_cycles = intr_timer_usec * multiplier / divisor
+ *
+ * Interrupt coalescing timer in usecs can be be converted/obtained
+ * from CPU cycles as follows:
+ *
+ * intr_timer_usec = intr_timer_cycles * divisor / multiplier
+ *
+ * in: none
+ * out: (u32)a0 = multiplier
+ * (u32)a1 = divisor
+ * (u32)a2 = maximum timer value in usec
+ */
+ CMD_INTR_COAL_CONVERT = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 50),
+
+ /*
+ * ISCSI DUMP API:
+ * in: (u64)a0=paddr of the param or param itself
+ * (u32)a1=ISCSI_CMD_xxx
+ */
+ CMD_ISCSI_DUMP_REQ = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 51),
+
+ /*
+ * ISCSI DUMP STATUS API:
+ * in: (u32)a0=cmd tag
+ * in: (u32)a1=ISCSI_CMD_xxx
+ * out: (u32)a0=cmd status
+ */
+ CMD_ISCSI_DUMP_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 52),
+
+ /*
+ * Subvnic migration from MQ <--> VF.
+ * Enable the LIF migration from MQ to VF and vice versa. MQ and VF
+ * indexes are statically bound at the time of initialization.
+ * Based on the
+ * direction of migration, the resources of either MQ or the VF shall
+ * be attached to the LIF.
+ * in: (u32)a0=Direction of Migration
+ * 0=> Migrate to VF
+ * 1=> Migrate to MQ
+ * (u32)a1=VF index (MQ index)
+ */
+ CMD_MIGRATE_SUBVNIC = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 53),
+
+ /*
+ * Register / Deregister the notification block for MQ subvnics
+ * in:
+ * (u64)a0=paddr to notify (set paddr=0 to unset)
+ * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify)
+ * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr)
+ * out:
+ * (u32)a1 = effective size
+ */
+ CMD_SUBVNIC_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 54),
+
+ /*
+ * Set the predefined mac address as default
+ * in:
+ * (u48)a0=mac addr
+ */
+ CMD_SET_MAC_ADDR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 55),
+
+ /* Update the provisioning info of the given VIF
+ * (u64)a0=paddr of vnic_devcmd_provinfo
+ * (u32)a1=sizeof provision info
+ */
+ CMD_PROV_INFO_UPDATE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 56),
+
+ /*
+ * Initialization for the devcmd2 interface.
+ * in: (u64) a0=host result buffer physical address
+ * in: (u16) a1=number of entries in result buffer
+ */
+ CMD_INITIALIZE_DEVCMD2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 57)
};
/* flags for CMD_OPEN */
@@ -347,4 +466,39 @@ struct vnic_devcmd {
u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */
};
+/*
+ * Version 2 of the interface.
+ *
+ * Some things are carried over, notably the vnic_devcmd_cmd enum.
+ */
+
+/*
+ * Flags for vnic_devcmd2.flags
+ */
+
+#define DEVCMD2_FNORESULT 0x1 /* Don't copy result to host */
+
+#define VNIC_DEVCMD2_NARGS VNIC_DEVCMD_NARGS
+
+struct vnic_devcmd2 {
+ u16 pad;
+ u16 flags;
+ u32 cmd; /* same command #defines as original */
+ u64 args[VNIC_DEVCMD2_NARGS];
+};
+
+#define VNIC_DEVCMD2_NRESULTS VNIC_DEVCMD_NARGS
+struct devcmd2_result {
+ u64 results[VNIC_DEVCMD2_NRESULTS];
+ u32 pad;
+ u16 completed_index; /* into copy WQ */
+ u8 error; /* same error codes as original */
+ u8 color; /* 0 or 1 as with completion queues */
+};
+
+#define DEVCMD2_RING_SIZE 32
+#define DEVCMD2_DESC_SIZE 128
+
+#define DEVCMD2_RESULTS_SIZE_MAX ((1 << 16) - 1)
+
#endif /* _VNIC_DEVCMD_H_ */
@@ -41,6 +41,13 @@ enum vnic_res_type {
RES_TYPE_RSVD7,
RES_TYPE_DEVCMD, /* Device command region */
RES_TYPE_PASS_THRU_PAGE, /* Pass-thru page */
+ RES_TYPE_SUBVNIC, /* subvnic resource type */
+ RES_TYPE_MQ_WQ, /* MQ Work queues */
+ RES_TYPE_MQ_RQ, /* MQ Receive queues */
+ RES_TYPE_MQ_CQ, /* MQ Completion queues */
+ RES_TYPE_DEPRECATED1, /* Old version of devcmd 2 */
+ RES_TYPE_DEPRECATED2, /* Old version of devcmd 2 */
+ RES_TYPE_DEVCMD2, /* Device control region */
RES_TYPE_MAX, /* Count of resource types */
};
This patch adds the fnic devcmd2 command structre and the command result structure definitions. Signed-off-by: Satish Kharat <satishkh@cisco.com> --- drivers/scsi/fnic/vnic_devcmd.h | 158 +++++++++++++++++++++++++++++- drivers/scsi/fnic/vnic_resource.h | 7 ++ 2 files changed, 163 insertions(+), 2 deletions(-)