@@ -1632,6 +1632,92 @@ qla2x00_max_speed_sup_show(struct device *dev, struct device_attribute *attr,
ha->max_speed_sup ? "32Gps" : "16Gps");
}
+static ssize_t
+qla2x00_port_speed_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_qla_host *vha = shost_priv(dev_to_shost(dev));
+ ulong type, speed;
+ int oldspeed, rval;
+ int mode = QLA_SET_DATA_RATE_LR;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA27XX(vha->hw)) {
+ ql_log(ql_log_warn, vha, 0x70d8,
+ "Speed setting not supported \n");
+ return -EINVAL;
+ }
+
+ rval = kstrtol(buf, 10, &type);
+ speed = type;
+ if (type == 40 || type == 80 || type == 160 ||
+ type == 320) {
+ ql_dbg(ql_dbg_user, vha, 0x70d9,
+ "Setting will be affected after a loss of sync\n");
+ type = type/10;
+ mode = QLA_SET_DATA_RATE_NOLR;
+ }
+
+ oldspeed = ha->set_data_rate;
+
+ switch (type) {
+ case 0:
+ ha->set_data_rate = PORT_SPEED_AUTO;
+ break;
+ case 4:
+ ha->set_data_rate = PORT_SPEED_4GB;
+ break;
+ case 8:
+ ha->set_data_rate = PORT_SPEED_8GB;
+ break;
+ case 16:
+ ha->set_data_rate = PORT_SPEED_16GB;
+ break;
+ case 32:
+ ha->set_data_rate = PORT_SPEED_32GB;
+ break;
+ default:
+ ql_log(ql_log_warn, vha, 0x1199,
+ "Unrecognized speed setting:%lx. Setting Autoneg\n",
+ speed);
+ ha->set_data_rate = PORT_SPEED_AUTO;
+ }
+
+ if (qla2x00_chip_is_down(vha) || (oldspeed == ha->set_data_rate))
+ return -EINVAL;
+
+ ql_log(ql_log_info, vha, 0x70da,
+ "Setting speed to %lx Gbps \n", type);
+
+ rval = qla2x00_set_data_rate(vha, mode);
+ if (rval != QLA_SUCCESS)
+ return -EIO;
+
+ return strlen(buf);
+}
+
+static ssize_t
+qla2x00_port_speed_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_qla_host *vha = shost_priv(dev_to_shost(dev));
+ struct qla_hw_data *ha = vha->hw;
+ ssize_t rval;
+ char *spd[7] = {"0", "0", "0", "4", "8", "16", "32"};
+
+ rval = qla2x00_get_data_rate(vha);
+ if (rval != QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x70db,
+ "Unable to get port speed rval:%zd\n", rval);
+ return -EINVAL;
+ }
+
+ ql_log(ql_log_info, vha, 0x70d6,
+ "port speed:%d\n", ha->link_data_rate);
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", spd[ha->link_data_rate]);
+}
+
/* ----- */
static ssize_t
@@ -2128,6 +2214,8 @@ static DEVICE_ATTR_RW(ql2xexchoffld);
static DEVICE_ATTR_RW(ql2xiniexchg);
static DEVICE_ATTR(dif_bundle_statistics, 0444,
qla2x00_dif_bundle_statistics_show, NULL);
+static DEVICE_ATTR(port_speed, 0644, qla2x00_port_speed_show,
+ qla2x00_port_speed_store);
struct device_attribute *qla2x00_host_attrs[] = {
@@ -2167,6 +2255,7 @@ struct device_attribute *qla2x00_host_attrs[] = {
&dev_attr_max_speed_sup,
&dev_attr_zio_threshold,
&dev_attr_dif_bundle_statistics,
+ &dev_attr_port_speed,
NULL, /* reserve for qlini_mode */
NULL, /* reserve for ql2xiniexchg */
NULL, /* reserve for ql2xexchoffld */
@@ -3698,12 +3698,14 @@ struct qla_hw_data {
#define PORT_SPEED_UNKNOWN 0xFFFF
#define PORT_SPEED_1GB 0x00
#define PORT_SPEED_2GB 0x01
+#define PORT_SPEED_AUTO 0x02
#define PORT_SPEED_4GB 0x03
#define PORT_SPEED_8GB 0x04
#define PORT_SPEED_16GB 0x05
#define PORT_SPEED_32GB 0x06
#define PORT_SPEED_10GB 0x13
uint16_t link_data_rate; /* F/W operating speed */
+ uint16_t set_data_rate; /* Set by user */
uint8_t current_topology;
uint8_t prev_topology;
@@ -4232,6 +4234,10 @@ struct qla_hw_data {
#define FW_ABILITY_MAX_SPEED(ha) \
(ha->fw_ability_mask & FW_ABILITY_MAX_SPEED_MASK)
+#define QLA_GET_DATA_RATE 0
+#define QLA_SET_DATA_RATE_NOLR 1
+#define QLA_SET_DATA_RATE_LR 2 /* Set speed and initiate LR */
+
/*
* Qlogic scsi host structure
*/
@@ -899,5 +899,6 @@ void qlt_update_host_map(struct scsi_qla_host *, port_id_t);
void qlt_remove_target_resources(struct qla_hw_data *);
void qlt_clr_qp_table(struct scsi_qla_host *vha);
void qlt_set_mode(struct scsi_qla_host *);
+int qla2x00_set_data_rate(scsi_qla_host_t *vha, uint16_t mode);
#endif /* _QLA_GBL_H */
@@ -3880,8 +3880,17 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
WRT_REG_DWORD(®->isp24.rsp_q_in, 0);
WRT_REG_DWORD(®->isp24.rsp_q_out, 0);
}
+
qlt_24xx_config_rings(vha);
+ /* If the user has configured the speed, set it here */
+ if (ha->set_data_rate) {
+ ql_dbg(ql_dbg_init, vha, 0x00fd,
+ "Speed set by user : %s Gbps \n",
+ qla2x00_get_link_speed_str(ha, ha->set_data_rate));
+ icb->firmware_options_3 = (ha->set_data_rate << 13);
+ }
+
/* PCI posting */
RD_REG_DWORD(&ioreg->hccr);
}
@@ -5250,6 +5250,66 @@ qla81xx_write_mpi_register(scsi_qla_host_t *vha, uint16_t *mb)
return rval;
}
+/* Set the specified data rate */
+int
+qla2x00_set_data_rate(scsi_qla_host_t *vha, uint16_t mode)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
+ uint16_t val;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1106,
+ "Entered %s speed:0x%x mode:0x%x.\n", __func__, ha->set_data_rate,
+ mode);
+
+ if (!IS_FWI2_CAPABLE(ha))
+ return QLA_FUNCTION_FAILED;
+
+ memset(mcp, 0, sizeof(*mcp));
+ switch (ha->set_data_rate) {
+ case PORT_SPEED_AUTO:
+ case PORT_SPEED_4GB:
+ case PORT_SPEED_8GB:
+ case PORT_SPEED_16GB:
+ case PORT_SPEED_32GB:
+ val = ha->set_data_rate;
+ break;
+ default:
+ ql_log(ql_log_warn, vha, 0x1199,
+ "Unrecognized speed setting:%d. Setting Autoneg\n",
+ ha->set_data_rate);
+ val = ha->set_data_rate = PORT_SPEED_AUTO;
+ break;
+ }
+
+ mcp->mb[0] = MBC_DATA_RATE;
+ mcp->mb[1] = mode;
+ mcp->mb[2] = val;
+
+ mcp->out_mb = MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_2|MBX_1|MBX_0;
+ if (IS_QLA83XX(ha) || IS_QLA27XX(ha))
+ mcp->in_mb |= MBX_4|MBX_3;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1107,
+ "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
+ } else {
+ if (mcp->mb[1] != 0x7)
+ ql_dbg(ql_dbg_mbx, vha, 0x1179,
+ "Speed set:0x%x\n", mcp->mb[1]);
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1108,
+ "Done %s.\n", __func__);
+ }
+
+ return rval;
+}
+
int
qla2x00_get_data_rate(scsi_qla_host_t *vha)
{
@@ -5265,7 +5325,7 @@ qla2x00_get_data_rate(scsi_qla_host_t *vha)
return QLA_FUNCTION_FAILED;
mcp->mb[0] = MBC_DATA_RATE;
- mcp->mb[1] = 0;
+ mcp->mb[1] = QLA_GET_DATA_RATE;
mcp->out_mb = MBX_1|MBX_0;
mcp->in_mb = MBX_2|MBX_1|MBX_0;
if (IS_QLA83XX(ha) || IS_QLA27XX(ha))