diff mbox series

[v2,3/3] arm64: dts: qcom: sdm845-mtp: Specify UFS device-reset GPIO

Message ID 20190606010249.3538-4-bjorn.andersson@linaro.org (mailing list archive)
State Superseded
Headers show
Series (Qualcomm) UFS device reset support | expand

Commit Message

Bjorn Andersson June 6, 2019, 1:02 a.m. UTC 
Specify the UFS device-reset gpio, so that the controller will issue a
reset of the UFS device.

Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- None

 arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 2e78638eb73b..d116a0956a9c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -388,6 +388,8 @@ 
 &ufs_mem_hc {
 	status = "okay";
 
+	device-reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
 	vcc-supply = <&vreg_l20a_2p95>;
 	vcc-max-microamp = <600000>;
 };