@@ -2918,6 +2918,8 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
struct qla_hw_data *ha = vha->hw;
uint16_t id = vha->vp_idx;
+ set_bit(VPORT_DELETE, &vha->dpc_flags);
+
while (test_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags) ||
test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags))
msleep(1000);
@@ -4338,6 +4338,7 @@ typedef struct scsi_qla_host {
#define IOCB_WORK_ACTIVE 31
#define SET_ZIO_THRESHOLD_NEEDED 32
#define ISP_ABORT_TO_ROM 33
+#define VPORT_DELETE 34
unsigned long pci_flags;
#define PFLG_DISCONNECTED 0 /* PCI device removed */
@@ -3127,7 +3127,8 @@ int qla24xx_post_gpnid_work(struct scsi_qla_host *vha, port_id_t *id)
{
struct qla_work_evt *e;
- if (test_bit(UNLOADING, &vha->dpc_flags))
+ if (test_bit(UNLOADING, &vha->dpc_flags) ||
+ (vha->vp_idx && test_bit(VPORT_DELETE, &vha->dpc_flags)))
return 0;
e = qla2x00_alloc_work(vha, QLA_EVT_GPNID);
@@ -66,6 +66,7 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha)
uint16_t vp_id;
struct qla_hw_data *ha = vha->hw;
unsigned long flags = 0;
+ u8 i;
mutex_lock(&ha->vport_lock);
/*
@@ -75,8 +76,9 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha)
* ensures no active vp_list traversal while the vport is removed
* from the queue)
*/
- wait_event_timeout(vha->vref_waitq, !atomic_read(&vha->vref_count),
- 10*HZ);
+ for (i = 0; i < 10 && atomic_read(&vha->vref_count); i++)
+ wait_event_timeout(vha->vref_waitq,
+ atomic_read(&vha->vref_count), HZ);
spin_lock_irqsave(&ha->vport_slock, flags);
if (atomic_read(&vha->vref_count)) {
@@ -262,6 +264,9 @@ qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vha, &ha->vp_list, list) {
if (vha->vp_idx) {
+ if (test_bit(VPORT_DELETE, &vha->dpc_flags))
+ continue;
+
atomic_inc(&vha->vref_count);
spin_unlock_irqrestore(&ha->vport_slock, flags);
@@ -300,6 +305,20 @@ qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
int
qla2x00_vp_abort_isp(scsi_qla_host_t *vha)
{
+ fc_port_t *fcport;
+
+ /*
+ * To exclusively reset vport, we need to log it out first.
+ * Note: This control_vp can fail if ISP reset is already
+ * issued, this is expected, as the vp would be already
+ * logged out due to ISP reset.
+ */
+ if (!test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) {
+ qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
+ list_for_each_entry(fcport, &vha->vp_fcports, list)
+ fcport->logout_on_delete = 0;
+ }
+
/*
* Physical port will do most of the abort and recovery work. We can
* just treat it as a loop down
@@ -312,16 +331,9 @@ qla2x00_vp_abort_isp(scsi_qla_host_t *vha)
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
}
- /*
- * To exclusively reset vport, we need to log it out first. Note: this
- * control_vp can fail if ISP reset is already issued, this is
- * expected, as the vp would be already logged out due to ISP reset.
- */
- if (!test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
- qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
-
ql_dbg(ql_dbg_taskm, vha, 0x801d,
"Scheduling enable of Vport %d.\n", vha->vp_idx);
+
return qla24xx_enable_vp(vha);
}
@@ -1150,9 +1150,14 @@ static inline int test_fcport_count(scsi_qla_host_t *vha)
void
qla2x00_wait_for_sess_deletion(scsi_qla_host_t *vha)
{
+ u8 i;
+
qla2x00_mark_all_devices_lost(vha, 0);
- wait_event_timeout(vha->fcport_waitQ, test_fcport_count(vha), 10*HZ);
+ for (i = 0; i < 10; i++)
+ wait_event_timeout(vha->fcport_waitQ, test_fcport_count(vha),
+ HZ);
+
flush_workqueue(vha->hw->wq);
}
@@ -1116,6 +1116,7 @@ void qlt_free_session_done(struct work_struct *work)
wake_up_all(&tgt->waitQ);
if (!test_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags) &&
+ !(vha->vp_idx && test_bit(VPORT_DELETE, &vha->dpc_flags)) &&
(!tgt || !tgt->tgt_stop) && !LOOP_TRANSITION(vha)) {
switch (vha->host->active_mode) {
case MODE_INITIATOR: