| Message ID | 20191120133935.13823-1-krzk@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | scsi: Fix Kconfig indentation | expand |
On 20/11/2019 13:39, Krzysztof Kozlowski wrote: > Adjust indentation from spaces to tab (+optional two spaces) as in > coding style with command like: > $ sed -e 's/^ /\t/' -i */Kconfig > ./scripts/checkpatch.pl -f --strict drivers/scsi/Kconfig didn't warn of indentation issues for me. To stop this reoccurring, could that be added? Thanks, John > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > drivers/scsi/Kconfig | 22 +++++++++++----------- > drivers/scsi/aic7xxx/Kconfig.aic7xxx | 14 +++++++------- > drivers/scsi/pcmcia/Kconfig | 2 +- > drivers/scsi/qedf/Kconfig | 4 ++-- > drivers/scsi/smartpqi/Kconfig | 8 ++++---- > 5 files changed, 25 insertions(+), 25 deletions(-) > > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > index 90cf4691b8c3..de6b99573f9e 100644 > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -1166,8 +1166,8 @@ config SCSI_LPFC > depends on NVME_FC || NVME_FC=n > select CRC_T10DIF > ---help--- > - This lpfc driver supports the Emulex LightPulse > - Family of Fibre Channel PCI host adapters. > + This lpfc driver supports the Emulex LightPulse > + Family of Fibre Channel PCI host adapters. > > config SCSI_LPFC_DEBUG_FS > bool "Emulex LightPulse Fibre Channel debugfs Support" > @@ -1480,14 +1480,14 @@ config ZFCP > depends on S390 && QDIO && SCSI > depends on SCSI_FC_ATTRS > help > - If you want to access SCSI devices attached to your IBM eServer > - zSeries by means of Fibre Channel interfaces say Y. > - For details please refer to the documentation provided by IBM at > - <http://oss.software.ibm.com/developerworks/opensource/linux390> > + If you want to access SCSI devices attached to your IBM eServer > + zSeries by means of Fibre Channel interfaces say Y. > + For details please refer to the documentation provided by IBM at > + <http://oss.software.ibm.com/developerworks/opensource/linux390> > > - This driver is also available as a module. This module will be > - called zfcp. If you want to compile it as a module, say M here > - and read <file:Documentation/kbuild/modules.rst>. > + This driver is also available as a module. This module will be > + called zfcp. If you want to compile it as a module, say M here > + and read <file:Documentation/kbuild/modules.rst>. > > config SCSI_PMCRAID > tristate "PMC SIERRA Linux MaxRAID adapter support" > @@ -1518,8 +1518,8 @@ config SCSI_VIRTIO > tristate "virtio-scsi support" > depends on VIRTIO > help > - This is the virtual HBA driver for virtio. If the kernel will > - be used in a virtual machine, say Y or M. > + This is the virtual HBA driver for virtio. If the kernel will > + be used in a virtual machine, say Y or M. > > source "drivers/scsi/csiostor/Kconfig" > > diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx > index 3546b8cc401f..4ed44ba4a55b 100644 > --- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx > +++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx > @@ -71,20 +71,20 @@ config AIC7XXX_DEBUG_ENABLE > driver errors. > > config AIC7XXX_DEBUG_MASK > - int "Debug code enable mask (2047 for all debugging)" > - depends on SCSI_AIC7XXX > - default "0" > - help > + int "Debug code enable mask (2047 for all debugging)" > + depends on SCSI_AIC7XXX > + default "0" > + help > Bit mask of debug options that is only valid if the > CONFIG_AIC7XXX_DEBUG_ENABLE option is enabled. The bits in this mask > are defined in the drivers/scsi/aic7xxx/aic7xxx.h - search for the > variable ahc_debug in that file to find them. > > config AIC7XXX_REG_PRETTY_PRINT > - bool "Decode registers during diagnostics" > - depends on SCSI_AIC7XXX > + bool "Decode registers during diagnostics" > + depends on SCSI_AIC7XXX > default y > - help > + help > Compile in register value tables for the output of expanded register > contents in diagnostics. This make it much easier to understand debug > output without having to refer to a data book and/or the aic7xxx.reg > diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig > index dc9b74c9348a..a7920fc95e7d 100644 > --- a/drivers/scsi/pcmcia/Kconfig > +++ b/drivers/scsi/pcmcia/Kconfig > @@ -56,7 +56,7 @@ config PCMCIA_NINJA_SCSI > [I-O DATA (OEM) (version string: "IO DATA","CBSC16 ","1")] > I-O DATA CBSC-II > [Kyusyu Matsushita Kotobuki (OEM) > - (version string: "KME ","SCSI-CARD-001","1")] > + (version string: "KME ","SCSI-CARD-001","1")] > KME KXL-820AN's card > HP M820e CDRW's card > etc. > diff --git a/drivers/scsi/qedf/Kconfig b/drivers/scsi/qedf/Kconfig > index 7cd993be4e57..80328dbd44c9 100644 > --- a/drivers/scsi/qedf/Kconfig > +++ b/drivers/scsi/qedf/Kconfig > @@ -3,8 +3,8 @@ config QEDF > tristate "QLogic QEDF 25/40/100Gb FCoE Initiator Driver Support" > depends on PCI && SCSI > depends on QED > - depends on LIBFC > - depends on LIBFCOE > + depends on LIBFC > + depends on LIBFCOE > select QED_LL2 > select QED_FCOE > ---help--- > diff --git a/drivers/scsi/smartpqi/Kconfig b/drivers/scsi/smartpqi/Kconfig > index bc6506884e3b..456ec474fa17 100644 > --- a/drivers/scsi/smartpqi/Kconfig > +++ b/drivers/scsi/smartpqi/Kconfig > @@ -50,7 +50,7 @@ config SCSI_SMARTPQI > To compile this driver as a module, choose M here: the > module will be called smartpqi. > > - Note: the aacraid driver will not manage a smartpqi > - controller. You need to enable smartpqi for smartpqi > - controllers. For more information, please see > - Documentation/scsi/smartpqi.txt > + Note: the aacraid driver will not manage a smartpqi > + controller. You need to enable smartpqi for smartpqi > + controllers. For more information, please see > + Documentation/scsi/smartpqi.txt >
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 90cf4691b8c3..de6b99573f9e 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1166,8 +1166,8 @@ config SCSI_LPFC depends on NVME_FC || NVME_FC=n select CRC_T10DIF ---help--- - This lpfc driver supports the Emulex LightPulse - Family of Fibre Channel PCI host adapters. + This lpfc driver supports the Emulex LightPulse + Family of Fibre Channel PCI host adapters. config SCSI_LPFC_DEBUG_FS bool "Emulex LightPulse Fibre Channel debugfs Support" @@ -1480,14 +1480,14 @@ config ZFCP depends on S390 && QDIO && SCSI depends on SCSI_FC_ATTRS help - If you want to access SCSI devices attached to your IBM eServer - zSeries by means of Fibre Channel interfaces say Y. - For details please refer to the documentation provided by IBM at - <http://oss.software.ibm.com/developerworks/opensource/linux390> + If you want to access SCSI devices attached to your IBM eServer + zSeries by means of Fibre Channel interfaces say Y. + For details please refer to the documentation provided by IBM at + <http://oss.software.ibm.com/developerworks/opensource/linux390> - This driver is also available as a module. This module will be - called zfcp. If you want to compile it as a module, say M here - and read <file:Documentation/kbuild/modules.rst>. + This driver is also available as a module. This module will be + called zfcp. If you want to compile it as a module, say M here + and read <file:Documentation/kbuild/modules.rst>. config SCSI_PMCRAID tristate "PMC SIERRA Linux MaxRAID adapter support" @@ -1518,8 +1518,8 @@ config SCSI_VIRTIO tristate "virtio-scsi support" depends on VIRTIO help - This is the virtual HBA driver for virtio. If the kernel will - be used in a virtual machine, say Y or M. + This is the virtual HBA driver for virtio. If the kernel will + be used in a virtual machine, say Y or M. source "drivers/scsi/csiostor/Kconfig" diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx index 3546b8cc401f..4ed44ba4a55b 100644 --- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx +++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx @@ -71,20 +71,20 @@ config AIC7XXX_DEBUG_ENABLE driver errors. config AIC7XXX_DEBUG_MASK - int "Debug code enable mask (2047 for all debugging)" - depends on SCSI_AIC7XXX - default "0" - help + int "Debug code enable mask (2047 for all debugging)" + depends on SCSI_AIC7XXX + default "0" + help Bit mask of debug options that is only valid if the CONFIG_AIC7XXX_DEBUG_ENABLE option is enabled. The bits in this mask are defined in the drivers/scsi/aic7xxx/aic7xxx.h - search for the variable ahc_debug in that file to find them. config AIC7XXX_REG_PRETTY_PRINT - bool "Decode registers during diagnostics" - depends on SCSI_AIC7XXX + bool "Decode registers during diagnostics" + depends on SCSI_AIC7XXX default y - help + help Compile in register value tables for the output of expanded register contents in diagnostics. This make it much easier to understand debug output without having to refer to a data book and/or the aic7xxx.reg diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig index dc9b74c9348a..a7920fc95e7d 100644 --- a/drivers/scsi/pcmcia/Kconfig +++ b/drivers/scsi/pcmcia/Kconfig @@ -56,7 +56,7 @@ config PCMCIA_NINJA_SCSI [I-O DATA (OEM) (version string: "IO DATA","CBSC16 ","1")] I-O DATA CBSC-II [Kyusyu Matsushita Kotobuki (OEM) - (version string: "KME ","SCSI-CARD-001","1")] + (version string: "KME ","SCSI-CARD-001","1")] KME KXL-820AN's card HP M820e CDRW's card etc. diff --git a/drivers/scsi/qedf/Kconfig b/drivers/scsi/qedf/Kconfig index 7cd993be4e57..80328dbd44c9 100644 --- a/drivers/scsi/qedf/Kconfig +++ b/drivers/scsi/qedf/Kconfig @@ -3,8 +3,8 @@ config QEDF tristate "QLogic QEDF 25/40/100Gb FCoE Initiator Driver Support" depends on PCI && SCSI depends on QED - depends on LIBFC - depends on LIBFCOE + depends on LIBFC + depends on LIBFCOE select QED_LL2 select QED_FCOE ---help--- diff --git a/drivers/scsi/smartpqi/Kconfig b/drivers/scsi/smartpqi/Kconfig index bc6506884e3b..456ec474fa17 100644 --- a/drivers/scsi/smartpqi/Kconfig +++ b/drivers/scsi/smartpqi/Kconfig @@ -50,7 +50,7 @@ config SCSI_SMARTPQI To compile this driver as a module, choose M here: the module will be called smartpqi. - Note: the aacraid driver will not manage a smartpqi - controller. You need to enable smartpqi for smartpqi - controllers. For more information, please see - Documentation/scsi/smartpqi.txt + Note: the aacraid driver will not manage a smartpqi + controller. You need to enable smartpqi for smartpqi + controllers. For more information, please see + Documentation/scsi/smartpqi.txt
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- drivers/scsi/Kconfig | 22 +++++++++++----------- drivers/scsi/aic7xxx/Kconfig.aic7xxx | 14 +++++++------- drivers/scsi/pcmcia/Kconfig | 2 +- drivers/scsi/qedf/Kconfig | 4 ++-- drivers/scsi/smartpqi/Kconfig | 8 ++++---- 5 files changed, 25 insertions(+), 25 deletions(-)