[11/18] qla2xxx: Force semaphore on flash validation failure

Commit Message

Himanshu Madhani Feb. 26, 2020, 10:40 p.m. UTC

From: Quinn Tran <[e-mail]>

For single port 28XX adapter, the second core can still runs in
the back ground.  The flash semaphore can be held by the non-active
core.  This patch tell MPI FW to check for this case and clear the
semaphore from the non-active core.

Signed-off-by: Quinn Tran <[e-mail]>
Signed-off-by: Himanshu Madhani <[e-mail]>
---
 drivers/scsi/qla2xxx/qla_mbx.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Patch

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 09531b9ab517..ca5eb518927b 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -667,10 +667,14 @@  qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 	struct qla_hw_data *ha = vha->hw;
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
+	u8 semaphore = 0;
+#define EXE_FW_FORCE_SEMAPHORE BIT_7
+	u8 retry = 3;
 
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1025,
 	    "Entered %s.\n", __func__);
 
+again:
 	mcp->mb[0] = MBC_EXECUTE_FIRMWARE;
 	mcp->out_mb = MBX_0;
 	mcp->in_mb = MBX_0;
@@ -712,6 +716,9 @@  qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 		if (ha->flags.exchoffld_enabled)
 			mcp->mb[4] |= ENABLE_EXCHANGE_OFFLD;
 
+		if (semaphore)
+			mcp->mb[11] |= EXE_FW_FORCE_SEMAPHORE;
+
 		mcp->out_mb |= MBX_4 | MBX_3 | MBX_2 | MBX_1 | MBX_11;
 		mcp->in_mb |= MBX_3 | MBX_2 | MBX_1;
 	} else {
@@ -728,6 +735,15 @@  qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 	rval = qla2x00_mailbox_command(vha, mcp);
 
 	if (rval != QLA_SUCCESS) {
+		if (IS_QLA28XX(ha) && rval == QLA_COMMAND_ERROR &&
+		    mcp->mb[1] == 0x27 && retry) {
+			semaphore = 1;
+			retry--;
+			ql_dbg(ql_dbg_async, vha, 0x1026,
+			    "Exe FW: force semaphore.\n");
+			goto again;
+		}
+
 		ql_dbg(ql_dbg_mbx, vha, 0x1026,
 		    "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
 		return rval;