diff mbox series

[5/5] arm64: dts: Add node for ufs exynos7

Message ID 20200306150529.3370-6-alim.akhtar@samsung.com (mailing list archive)
State Superseded
Headers show
Series exynos-ufs: Add support for UFS HCI | expand

Commit Message

Alim Akhtar March 6, 2020, 3:05 p.m. UTC 
Adding dt node foe UFS and UFS-PHY for exynos7 SoC.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 .../boot/dts/exynos/exynos7-espresso.dts      | 16 ++++++
 arch/arm64/boot/dts/exynos/exynos7.dtsi       | 56 ++++++++++++++++++-
 2 files changed, 70 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski March 13, 2020, 9:05 a.m. UTC | #1 
On Fri, Mar 06, 2020 at 08:35:29PM +0530, Alim Akhtar wrote:
> Adding dt node foe UFS and UFS-PHY for exynos7 SoC.
> 
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  .../boot/dts/exynos/exynos7-espresso.dts      | 16 ++++++
>  arch/arm64/boot/dts/exynos/exynos7.dtsi       | 56 ++++++++++++++++++-
>  2 files changed, 70 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> index 7af288fa9475..dee5a3ae7de3 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> @@ -410,3 +410,19 @@
>  	vbus-supply = <&usb30_vbus_reg>;
>  	vbus-boost-supply = <&usb3drd_boost_5v>;
>  };
> +
> +&ufs {

Let's keep it in alphabetical order, so before usbdrd_phy.

> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
> +	ufs,pwr-attr-mode = "FAST";
> +	ufs,pwr-attr-lane = <2>;
> +	ufs,pwr-attr-gear = <2>;
> +	ufs,pwr-attr-hs-series = "HS_rate_b";
> +	ufs-rx-adv-fine-gran-sup_en = <1>;
> +	ufs-rx-adv-fine-gran-step = <3>;
> +	ufs-rx-adv-min-activate-time-cap = <9>;
> +	ufs-pa-granularity = <6>;
> +	ufs-pa-tacctivate = <3>;
> +	ufs-pa-hibern8time = <20>;
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index 5558045637ac..3edf63d18873 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -220,9 +220,14 @@
>  			#clock-cells = <1>;
>  			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
>  				 <&clock_top1 DOUT_SCLK_MMC0>,
> -				 <&clock_top1 DOUT_SCLK_MMC1>;
> +				 <&clock_top1 DOUT_SCLK_MMC1>,
> +				 <&clock_top1 DOUT_SCLK_UFSUNIPRO20>,
> +				 <&clock_top1 DOUT_SCLK_PHY_FSYS1>,
> +				 <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>;
>  			clock-names = "fin_pll", "dout_aclk_fsys1_200",
> -				      "dout_sclk_mmc0", "dout_sclk_mmc1";
> +				      "dout_sclk_mmc0", "dout_sclk_mmc1",
> +				      "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1",
> +				      "dout_sclk_phy_fsys1_26m";
>  		};
>  
>  		serial_0: serial@13630000 {
> @@ -634,6 +639,53 @@
>  				phy-names = "usb2-phy", "usb3-phy";
>  			};
>  		};
> +
> +		ufs: ufs@15570000 {
> +			compatible ="samsung,exynos7-ufs";

Space after =.

> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			reg =

No new line after =

> +				<0x15570000 0x100>,  /* 0: HCI standard */
> +				<0x15570100 0x100>,  /* 1: Vendor specificed */
> +				<0x15571000 0x200>,  /* 2: UNIPRO */
> +				<0x15572000 0x300>;  /* 3: UFS protector */
> +			reg-names = "hci", "vs_hci", "unipro", "ufsp";
> +			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks =
> +				/* core clock */

Ditto here and further, no new liine after =

Rest looks good. I will need DT's ack on bindings before I will take the
DTS to samsung-soc.

Best regards,
Krzysztof

> +				<&clock_fsys1 ACLK_UFS20_LINK>,
> +				/* unipro clocks */
> +				<&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
> +			clock-names =
> +				/* core clocks */
> +				"core_clk",
> +				/* unipro clocks */
> +				"sclk_unipro_main";
> +			freq-table-hz = <0 0>, <0 0>;
> +			pclk-freq-avail-range = <70000000 133000000>;
> +			ufs,pwr-local-l2-timer = <8000 28000 20000>;
> +			ufs,pwr-remote-l2-timer = <12000 32000 16000>;
> +			phys = <&ufs_phy>;
> +			phy-names = "ufs-phy";
> +			status = "disabled";
> +		};
> +
> +		ufs_phy: ufs-phy@0x15571800 {
> +			compatible = "samsung,exynos7-ufs-phy";
> +			reg = <0x15571800 0x240>;
> +			reg-names = "phy-pma";
> +			samsung,pmu-syscon = <&pmu_system_controller>;
> +			#phy-cells = <0>;
> +			clocks =
> +				/* refclk clocks */
> +				<&clock_fsys1 MOUT_FSYS1_PHYCLK_SEL1>,
> +				<&clock_top1 CLK_SCLK_PHY_FSYS1_26M>;
> +			clock-names =
> +				/* refclk clocks */
> +				"ref_clk_parent",
> +				"ref_clk";
> +		};
>  	};
>  
>  	timer {
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 7af288fa9475..dee5a3ae7de3 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -410,3 +410,19 @@ 
 	vbus-supply = <&usb30_vbus_reg>;
 	vbus-boost-supply = <&usb3drd_boost_5v>;
 };
+
+&ufs {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+	ufs,pwr-attr-mode = "FAST";
+	ufs,pwr-attr-lane = <2>;
+	ufs,pwr-attr-gear = <2>;
+	ufs,pwr-attr-hs-series = "HS_rate_b";
+	ufs-rx-adv-fine-gran-sup_en = <1>;
+	ufs-rx-adv-fine-gran-step = <3>;
+	ufs-rx-adv-min-activate-time-cap = <9>;
+	ufs-pa-granularity = <6>;
+	ufs-pa-tacctivate = <3>;
+	ufs-pa-hibern8time = <20>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 5558045637ac..3edf63d18873 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -220,9 +220,14 @@ 
 			#clock-cells = <1>;
 			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
 				 <&clock_top1 DOUT_SCLK_MMC0>,
-				 <&clock_top1 DOUT_SCLK_MMC1>;
+				 <&clock_top1 DOUT_SCLK_MMC1>,
+				 <&clock_top1 DOUT_SCLK_UFSUNIPRO20>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>;
 			clock-names = "fin_pll", "dout_aclk_fsys1_200",
-				      "dout_sclk_mmc0", "dout_sclk_mmc1";
+				      "dout_sclk_mmc0", "dout_sclk_mmc1",
+				      "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1",
+				      "dout_sclk_phy_fsys1_26m";
 		};
 
 		serial_0: serial@13630000 {
@@ -634,6 +639,53 @@ 
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
+
+		ufs: ufs@15570000 {
+			compatible ="samsung,exynos7-ufs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg =
+				<0x15570000 0x100>,  /* 0: HCI standard */
+				<0x15570100 0x100>,  /* 1: Vendor specificed */
+				<0x15571000 0x200>,  /* 2: UNIPRO */
+				<0x15572000 0x300>;  /* 3: UFS protector */
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =
+				/* core clock */
+				<&clock_fsys1 ACLK_UFS20_LINK>,
+				/* unipro clocks */
+				<&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+			clock-names =
+				/* core clocks */
+				"core_clk",
+				/* unipro clocks */
+				"sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pclk-freq-avail-range = <70000000 133000000>;
+			ufs,pwr-local-l2-timer = <8000 28000 20000>;
+			ufs,pwr-remote-l2-timer = <12000 32000 16000>;
+			phys = <&ufs_phy>;
+			phy-names = "ufs-phy";
+			status = "disabled";
+		};
+
+		ufs_phy: ufs-phy@0x15571800 {
+			compatible = "samsung,exynos7-ufs-phy";
+			reg = <0x15571800 0x240>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks =
+				/* refclk clocks */
+				<&clock_fsys1 MOUT_FSYS1_PHYCLK_SEL1>,
+				<&clock_top1 CLK_SCLK_PHY_FSYS1_26M>;
+			clock-names =
+				/* refclk clocks */
+				"ref_clk_parent",
+				"ref_clk";
+		};
 	};
 
 	timer {