@@ -388,6 +388,7 @@ struct qedf_ctx {
mempool_t *io_mempool;
struct workqueue_struct *dpc_wq;
struct delayed_work grcdump_work;
+ struct delayed_work stag_work;
u32 slow_sge_ios;
u32 fast_sge_ios;
@@ -403,6 +404,7 @@ struct qedf_ctx {
u32 flogi_cnt;
u32 flogi_failed;
+ u32 flogi_pending;
/* Used for fc statistics */
struct mutex stats_mutex;
@@ -282,6 +282,7 @@ static void qedf_flogi_resp(struct fc_seq *seq, struct fc_frame *fp,
else if (fc_frame_payload_op(fp) == ELS_LS_ACC) {
/* Set the source MAC we will use for FCoE traffic */
qedf_set_data_src_addr(qedf, fp);
+ qedf->flogi_pending = 0;
}
/* Complete flogi_compl so we can proceed to sending ADISCs */
@@ -307,6 +308,11 @@ static struct fc_seq *qedf_elsct_send(struct fc_lport *lport, u32 did,
*/
if (resp == fc_lport_flogi_resp) {
qedf->flogi_cnt++;
+ if (qedf->flogi_pending >= QEDF_FLOGI_RETRY_CNT) {
+ schedule_delayed_work(&qedf->stag_work, 2);
+ return NULL;
+ }
+ qedf->flogi_pending++;
return fc_elsct_send(lport, did, fp, op, qedf_flogi_resp,
arg, timeout);
}
@@ -850,6 +856,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport)
qedf = lport_priv(lport);
+ qedf->flogi_pending = 0;
/* For host reset, essentially do a soft link up/down */
atomic_set(&qedf->link_state, QEDF_LINK_DOWN);
QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC,
@@ -3205,6 +3212,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
init_completion(&qedf->fipvlan_compl);
mutex_init(&qedf->stats_mutex);
mutex_init(&qedf->flush_mutex);
+ qedf->flogi_pending = 0;
QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_INFO,
"QLogic FastLinQ FCoE Module qedf %s, "
@@ -3235,6 +3243,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
INIT_DELAYED_WORK(&qedf->link_update, qedf_handle_link_update);
INIT_DELAYED_WORK(&qedf->link_recovery, qedf_link_recovery);
INIT_DELAYED_WORK(&qedf->grcdump_work, qedf_wq_grcdump);
+ INIT_DELAYED_WORK(&qedf->stag_work, qedf_stag_change_work);
qedf->fipvlan_retries = qedf_fipvlan_retries;
/* Set a default prio in case DCBX doesn't converge */
if (qedf_default_prio > -1) {
@@ -3770,6 +3779,20 @@ void qedf_get_protocol_tlv_data(void *dev, void *data)
fcoe->scsi_tsk_full = qedf->task_set_fulls;
}
+/* Deferred work function to perform soft context reset on STAG change */
+void qedf_stag_change_work(struct work_struct *work)
+{
+ struct qedf_ctx *qedf =
+ container_of(work, struct qedf_ctx, stag_work.work);
+
+ if (!qedf) {
+ QEDF_ERR(&qedf->dbg_ctx, "qedf is NULL");
+ return;
+ }
+ QEDF_ERR(&qedf->dbg_ctx, "Performing software context reset.\n");
+ qedf_ctx_soft_reset(qedf->lport);
+}
+
static void qedf_shutdown(struct pci_dev *pdev)
{
__qedf_remove(pdev, QEDF_MODE_NORMAL);
If a port is brought down for an extended period of time, the fipvlan counter gets exhausted and the driver will fall back to default VLAN 1002 and call fcoe_ctlr_link_up to log in. However, the switch will discard the FLOGI attempt because the VLAN is now different. Keep track of the number of FLOGI attempts and if a threshold of QEDF_FLOGI_RETRY_CNT is exceeded, perform a context soft reset. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> --- drivers/scsi/qedf/qedf.h | 2 ++ drivers/scsi/qedf/qedf_main.c | 23 +++++++++++++++++++++++ 2 files changed, 25 insertions(+)