diff mbox series

[17/40] scsi: pm8001: pm80xx_hwi: Fix some function documentation issues

Message ID 20200721164148.2617584-18-lee.jones@linaro.org (mailing list archive)
State Accepted
Headers show
Series Set 4: Next set of SCSI related W=1 warnings | expand

Commit Message

Lee Jones July 21, 2020, 4:41 p.m. UTC 
Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm80xx_hwi.c:918: warning: Function parameter or member 'number' not described in 'update_inbnd_queue_table'
 drivers/scsi/pm8001/pm80xx_hwi.c:954: warning: Function parameter or member 'number' not described in 'update_outbnd_queue_table'
 drivers/scsi/pm8001/pm80xx_hwi.c:1717: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_enable'
 drivers/scsi/pm8001/pm80xx_hwi.c:1735: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_disable'
 drivers/scsi/pm8001/pm80xx_hwi.c:4830: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_start_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4872: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_stop_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_ha' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_dev' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'flag' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phyId' not described in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phy_op' not described in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'phy_id' description in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_isr'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'irq' description in 'pm80xx_chip_isr'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'stat' description in 'pm80xx_chip_isr'

Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 05c944a3bdca0..abcbd47162d64 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -912,6 +912,7 @@  static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
 /**
  * update_inbnd_queue_table - update the inbound queue table to the HBA.
  * @pm8001_ha: our hba card information
+ * @number: entry in the queue
  */
 static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
 					 int number)
@@ -948,6 +949,7 @@  static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
 /**
  * update_outbnd_queue_table - update the outbound queue table to the HBA.
  * @pm8001_ha: our hba card information
+ * @number: entry in the queue
  */
 static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
 						 int number)
@@ -1711,6 +1713,7 @@  pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
 /**
  * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
  * @pm8001_ha: our hba card information
+ * @vec: interrupt number to enable
  */
 static void
 pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
@@ -1729,6 +1732,7 @@  pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 /**
  * pm8001_chip_interrupt_disable- disable PM8001 chip interrupt
  * @pm8001_ha: our hba card information
+ * @vec: interrupt number to disable
  */
 static void
 pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
@@ -4822,7 +4826,6 @@  static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 /**
  * pm80xx_chip_phy_start_req - start phy via PHY_START COMMAND
  * @pm8001_ha: our hba card information.
- * @num: the inbound queue number
  * @phy_id: the phy id which we wanted to start up.
  */
 static int
@@ -4864,7 +4867,6 @@  pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
 /**
  * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND
  * @pm8001_ha: our hba card information.
- * @num: the inbound queue number
  * @phy_id: the phy id which we wanted to start up.
  */
 static int pm80xx_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
@@ -4884,7 +4886,7 @@  static int pm80xx_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
 	return ret;
 }
 
-/**
+/*
  * see comments on pm8001_mpi_reg_resp.
  */
 static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
@@ -4957,9 +4959,8 @@  static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
 /**
  * pm80xx_chip_phy_ctl_req - support the local phy operation
  * @pm8001_ha: our hba card information.
- * @num: the inbound queue number
- * @phy_id: the phy id which we wanted to operate
- * @phy_op:
+ * @phyId: the phy id which we wanted to operate
+ * @phy_op: phy operation to request
  */
 static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
 	u32 phyId, u32 phy_op)
@@ -4998,8 +4999,7 @@  static u32 pm80xx_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha)
 /**
  * pm8001_chip_isr - PM8001 isr handler.
  * @pm8001_ha: our hba card information.
- * @irq: irq number.
- * @stat: stat.
+ * @vec: irq number.
  */
 static irqreturn_t
 pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)