@@ -975,6 +975,20 @@ _base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
return;
+ /*
+ * Older Firmware version doesn't support driver trigger pages.
+ * So, skip displaying 'config invalid type' type
+ * of error message.
+ */
+ if (request_hdr->Function == MPI2_FUNCTION_CONFIG) {
+ Mpi2ConfigRequest_t *rqst = (Mpi2ConfigRequest_t *)request_hdr;
+
+ if ((rqst->ExtPageType ==
+ MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER) &&
+ !(ioc->logging_level & MPT_DEBUG_CONFIG)) {
+ return;
+ }
+ }
switch (ioc_status) {
@@ -4783,6 +4797,58 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc)
}
}
+/**
+ * _base_check_for_trigger_pages_support - checks whether HBA FW supports
+ * driver trigger pages or not
+ * @ioc : per adapter object
+ *
+ * Returns trigger flags mask if HBA FW supports driver trigger pages,
+ * otherwise returns EFAULT.
+ */
+static int
+_base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi26DriverTriggerPage0_t trigger_pg0;
+ int r = 0;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 ioc_status;
+
+ r = mpt3sas_config_get_driver_trigger_pg0(ioc, &mpi_reply,
+ &trigger_pg0);
+ if (r)
+ return -EFAULT;
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ return -EFAULT;
+
+ return le16_to_cpu(trigger_pg0.TriggerFlags);
+}
+
+/**
+ * _base_get_diag_triggers - Retrieve diag trigger values from
+ * persistent pages.
+ * @ioc : per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
+{
+ u16 trigger_flags;
+
+ /*
+ * Default setting of master trigger.
+ */
+ ioc->diag_trigger_master.MasterData =
+ (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
+ trigger_flags = _base_check_for_trigger_pages_support(ioc);
+ if (trigger_flags < 0)
+ return;
+ ioc->supports_trigger_pages = 1;
+}
+
/**
* _base_static_config_pages - static start of day config pages
* @ioc: per adapter object
@@ -4869,6 +4935,10 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
if (ioc->is_aero_ioc)
_base_update_ioc_page1_inlinewith_perf_mode(ioc);
+ if (ioc->is_gen35_ioc) {
+ if (ioc->is_driver_loading)
+ _base_get_diag_triggers(ioc);
+ }
}
/**
@@ -71,6 +71,7 @@
#include "mpt3sas_debug.h"
#include "mpt3sas_trigger_diag.h"
+#include "mpt3sas_trigger_pages.h"
/* driver versioning info */
#define MPT3SAS_DRIVER_NAME "mpt3sas"
@@ -1541,6 +1542,7 @@ struct MPT3SAS_ADAPTER {
struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event;
struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi;
struct SL_WH_MPI_TRIGGERS_T diag_trigger_mpi;
+ u8 supports_trigger_pages;
void *device_remove_in_progress;
u16 device_remove_in_progress_sz;
u8 is_gen35_ioc;
@@ -1817,6 +1819,9 @@ int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle,
u16 *volume_handle);
int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc,
u16 volume_handle, u64 *wwid);
+int
+mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page);
/* ctl shared API */
extern struct device_attribute *mpt3sas_host_attrs[];
@@ -1742,6 +1742,140 @@ mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
return r;
}
+/**
+ * mpt3sas_config_get_driver_trigger_pg0 - obtain driver trigger page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+ mpi_request.ExtPageType =
+ MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+ mpi_request.Header.PageNumber = 0;
+ mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+ out:
+ return r;
+}
+
+/**
+ * mpt3sas_config_set_driver_trigger_pg0 - write driver trigger page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_config_set_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+ mpi_request.ExtPageType =
+ MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+ mpi_request.Header.PageNumber = 0;
+ mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+ out:
+ return r;
+}
+
+/**
+ * mpt3sas_config_update_driver_trigger_pg0 - update driver trigger page 0
+ * @ioc: per adapter object
+ * @trigger_flag: trigger type bit map
+ * @set: set ot clear trigger values
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+mpt3sas_config_update_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
+ u16 trigger_flag, bool set)
+{
+ Mpi26DriverTriggerPage0_t tg_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ int rc;
+ u16 flags, ioc_status;
+
+ rc = mpt3sas_config_get_driver_trigger_pg0(ioc, &mpi_reply, &tg_pg0);
+ if (rc)
+ return rc;
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ dcprintk(ioc,
+ ioc_err(ioc,
+ "%s: Failed to get trigger pg0, ioc_status(0x%04x)\n",
+ __func__, ioc_status));
+ return -EFAULT;
+ }
+
+ if (set)
+ flags = le16_to_cpu(tg_pg0.TriggerFlags) | trigger_flag;
+ else
+ flags = le16_to_cpu(tg_pg0.TriggerFlags) & ~trigger_flag;
+
+ tg_pg0.TriggerFlags = cpu_to_le16(flags);
+
+ rc = _config_set_driver_trigger_pg0(ioc, &mpi_reply, &tg_pg0);
+ if (rc)
+ return rc;
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ dcprintk(ioc,
+ ioc_err(ioc,
+ "%s: Failed to update trigger pg0, ioc_status(0x%04x)\n",
+ __func__, ioc_status));
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
/**
* mpt3sas_config_get_volume_handle - returns volume handle for give hidden
* raid components
new file mode 100644
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * to store diag trigger values into persistent driver triggers pages
+ * for MPT (Message Passing Technology) based controllers.
+ *
+ * Copyright (C) 2020 Broadcom Inc.
+ *
+ * Authors: Broadcom Inc.
+ * Sreekanth Reddy <sreekanth.reddy@broadcom.com>
+ *
+ * Send feedback to : MPT-FusionLinux.pdl@broadcom.com)
+ */
+
+#include "mpi/mpi2_cnfg.h"
+
+#ifndef MPI2_TRIGGER_PAGES_H
+#define MPI2_TRIGGER_PAGES_H
+
+#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER (0xE0)
+#define MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION (0x01)
+typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U16 TriggerFlags; /* 0x08 */
+ U16 Reserved0xA; /* 0x0A */
+ U32 Reserved0xC[61]; /* 0x0C */
+} _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0, Mpi26DriverTriggerPage0_t;
+
+/* Trigger Flags */
+#define MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID (0x0001)
+#define MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID (0x0002)
+#define MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID (0x0004)
+#define MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID (0x0008)
+
+#define MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION (0x01)
+typedef struct _MPI26_DRIVER_MASTER_TIGGER_ENTRY {
+ U32 MasterTriggerFlags;
+} MPI26_DRIVER_MASTER_TIGGER_ENTRY;
+
+#define MPI26_MAX_MASTER_TRIGGERS (1)
+typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U16 NumMasterTrigger; /* 0x08 */
+ U16 Reserved0xA; /* 0x0A */
+ MPI26_DRIVER_MASTER_TIGGER_ENTRY MasterTriggers[MPI26_MAX_MASTER_TRIGGERS]; /* 0x0C */
+} MPI26_CONFIG_PAGE_DRIVER_TIGGER_1, Mpi26DriverTriggerPage1_t;
+
+#define MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION (0x01)
+typedef struct _MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY {
+ U16 MPIEventCode; /* 0x00 */
+ U16 MPIEventCodeSpecific; /* 0x02 */
+} MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY;
+
+#define MPI26_MAX_MPI_EVENT_TRIGGERS (20)
+typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_2 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U16 NumMPIEventTrigger; /* 0x08 */
+ U16 Reserved0xA; /* 0x0A */
+ MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY MPIEventTriggers[MPI26_MAX_MPI_EVENT_TRIGGERS]; /* 0x0C */
+} MPI26_CONFIG_PAGE_DRIVER_TIGGER_2, Mpi26DriverTriggerPage2_t;
+
+#define MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION (0x01)
+typedef struct _MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY {
+ U8 ASCQ; /* 0x00 */
+ U8 ASC; /* 0x01 */
+ U8 SenseKey; /* 0x02 */
+ U8 Reserved; /* 0x03 */
+} MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY;
+
+#define MPI26_MAX_SCSI_SENSE_TRIGGERS (20)
+typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_3 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U16 NumSCSISenseTrigger; /* 0x08 */
+ U16 Reserved0xA; /* 0x0A */
+ MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY SCSISenseTriggers[MPI26_MAX_SCSI_SENSE_TRIGGERS]; /* 0x0C */
+} MPI26_CONFIG_PAGE_DRIVER_TIGGER_3, Mpi26DriverTriggerPage3_t;
+
+#define MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION (0x01)
+typedef struct _MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY {
+ U16 IOCStatus; /* 0x00 */
+ U16 Reserved; /* 0x02 */
+ U32 LogInfo; /* 0x04 */
+} MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY;
+
+#define MPI26_MAX_LOGINFO_TRIGGERS (20)
+typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_4 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U16 NumIOCStatusLogInfoTrigger; /* 0x08 */
+ U16 Reserved0xA; /* 0x0A */
+ MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY IOCStatusLoginfoTriggers[MPI26_MAX_LOGINFO_TRIGGERS]; /* 0x0C */
+} MPI26_CONFIG_PAGE_DRIVER_TIGGER_4, Mpi26DriverTriggerPage4_t;
+
+#endif
Problem statement: User sets the tigger value inorder to collect the IOC's Host tace buffer automicatically upon detecting the trigger condition. But the tigger values that the user has set are not persistent across the system reboot or reload of driver. User has to set them eveytime upon rebooting, realoding the driver or when HBA is moved to another system. Solution: Inorder to make the user trigger settings persistant, these trigger values needs to be saved in IOC's pages and IOC provides below pages to save them, * Driver Persistent Trigger Page 0 : This page is used to know list of trigger types that are enabled * Driver Persistent Trigger Page 1 : This page stores the list of Mater triggers that are enabled * Driver Persistent Trigger Page 2 : This page stores the list of MPI Event Triggers that are enabled * Driver Persistent Trigger Page 3 : This page stores the list of SCSI Sense Triggers that are enabled * Driver Persistent Trigger Page 4 : This page stores the list of IOCStatus-LogInfo Triggers that are enabled. * Whenever user configure the trigger values then driver writes the configured trigger values in the corresponding trigger pages. * During next driver load time, driver reads the trigger values from these pages and configures the trigger values accordingly. * During firmware upload operation, * if the newer firmware supports these driver trigger pages then driver write backs the configured diag trigger values on driver trigger pages of IOC. * if the newer firmware doesn't supports these driver trigger pages then driver clear the supporting trigger flag so that whenever user modifies the trigger values then driver won't do any config write operations to driver trigger pages. Current patch change set: * During driver load, driver will first read Persistent Trigger Page0. - If this page's read operation fails then it means that IOC firmware doesn't support these Persistent Trigger Pages, i.e. current feature of saving/restoring the tigger values is not enabled in the IOC. So, driver can't read/store user trigger values from/to Persistent triggers pages. - If this Page's read opearation is successful then it means that IOC firmware supports storing the trigger values on persistent trigger pages. So, driver sets the supports_trigger_pages ioc variable to one. On reading this page, driver will get to know which are all the trigger types that are enabled before the driver load. * And added below helper functions to read & modify Persistent Trigger Page0. - mpt3sas_config_get_driver_trigger_pg0 : reads the page, - mpt3sas_config_set_driver_trigger_pg0 : writes the page, - mpt3sas_config_update_driver_trigger_pg0 : When user adds any new trigger values then driver enable the corresponding trigger type bit in 'TriggerFlags' field of Persistent Trigger Page0 (if it was not enabled before) before adding these trigger values to corresponding Persistent Trigger type pages. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Reported-by: kernel test robot <lkp@intel.com> --- v1 Changes: Fixed sparse warnings and warnings with W=1 build. drivers/scsi/mpt3sas/mpt3sas_base.c | 70 ++++++++++ drivers/scsi/mpt3sas/mpt3sas_base.h | 5 + drivers/scsi/mpt3sas/mpt3sas_config.c | 134 +++++++++++++++++++ drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h | 94 +++++++++++++ 4 files changed, 303 insertions(+) create mode 100644 drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h