diff mbox series

[v1,5/8] mpt3sas: Add SCSI sense triggers persistent Trigger

Message ID 20201126094311.8686-6-suganath-prabu.subramani@broadcom.com (mailing list archive)
State Accepted
Headers show
Series mpt3sas: Features to enhance driver debugging. | expand

Commit Message

Suganath Prabu S Nov. 26, 2020, 9:43 a.m. UTC 
Description:
This trigger page3 is used to store information about SCSI Sense
triggers.

Persistent Trigger Page-3
------------------------------------------------------------------
| 31         24 23            16 15              8 7            0|    Byte
------------------------------------------------------------------
| PageType      | PageNumber     | Reserved       | PageVersion  |    0x00
------------------------------------------------------------------
| Reserved      | ExtPageType    |          ExtPageLen           |    0x04
------------------------------------------------------------------
| Reserved      | NumScsiSense   |         TriggerEntries        |    0x08
------------------------------------------------------------------
|               ScsiSenseTriggerEntry[0]                         |    0x0C
------------------------------------------------------------------
|                    …        …                                  |
------------------------------------------------------------------
|               ScsiSenseTriggerEntry[19]                        |    0x58
------------------------------------------------------------------

NumScsiSenseTriggerEntries:
This field indicates number of SCSI Sense trigger entries stored in
this page. Currently driver is supporting a maximum of 20-SCSI Sense
trigger entries.

ScsiSenseTriggerEntry:
-----------------------------------------------
| 31      24 23       16 15       8 7       0 |
-----------------------------------------------
| Reserved   | SenseKey  |    ASC   |   ASCQ  |
-----------------------------------------------

ASCQ     => Additional Sense Code Qualifier
ASC      => Additional Sense Code
SenseKey => Sense Key values

ASCQ     => Additional Sense Code Qualifier
ASC      => Additional Sense Code
SenseKey => Sense Key values

During driver load:
 If SCSI Sense trigger type bit is enabled in the Persistent
 Trigger Page0 then read the Persistent Trigger Page3 and update the
 ioc instances diag_trigger_scsi.SCSITriggerEntry with Persistent
 Trigger Page3's SCSISenseTriggerEntries. This will restores the
 SCSI sense trigger type's triggers which are enabled before.

When user modifies the SCSI sense trigger type triggers:
 When user sets/clears the SCSI sense trigger type triggers then
 driver first checks whether IOC firmware supports trigger pages
 support or not. if firmware supports these pages then driver enables
 the SCSI sense trigger type bit in Persistent Trigger Page0 (if it
 was not enabled before) and updates the user provided trigger values
 in Persistent Trigger Page3.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reported-by: kernel test robot <lkp@intel.com>
---
v1 Changes:
Fixed sparse warnings and warnings with W=1 build.

 drivers/scsi/mpt3sas/mpt3sas_base.c   |  59 ++++++++++
 drivers/scsi/mpt3sas/mpt3sas_base.h   |   6 +
 drivers/scsi/mpt3sas/mpt3sas_config.c | 157 ++++++++++++++++++++++++++
 3 files changed, 222 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 1fd77aa..8c2ef56 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -4848,6 +4848,57 @@  _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 	}
 }
 
+/**
+ * _base_get_scsi_diag_triggers - get scsi diag trigger values from
+ *				persistent pages
+ * @ioc : per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26DriverTriggerPage3_t trigger_pg3;
+	struct SL_WH_SCSI_TRIGGER_T *scsi_tg;
+	MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY *mpi_scsi_tg;
+	Mpi2ConfigReply_t mpi_reply;
+	int r = 0, i = 0;
+	u16 count = 0;
+	u16 ioc_status;
+
+	r = mpt3sas_config_get_driver_trigger_pg3(ioc, &mpi_reply,
+	    &trigger_pg3);
+	if (r)
+		return;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dinitprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		return;
+	}
+
+	if (le16_to_cpu(trigger_pg3.NumSCSISenseTrigger)) {
+		count = le16_to_cpu(trigger_pg3.NumSCSISenseTrigger);
+		count = min_t(u16, NUM_VALID_ENTRIES, count);
+		ioc->diag_trigger_scsi.ValidEntries = count;
+
+		scsi_tg = &ioc->diag_trigger_scsi.SCSITriggerEntry[0];
+		mpi_scsi_tg = &trigger_pg3.SCSISenseTriggers[0];
+		for (i = 0; i < count; i++) {
+			scsi_tg->ASCQ = mpi_scsi_tg->ASCQ;
+			scsi_tg->ASC = mpi_scsi_tg->ASC;
+			scsi_tg->SenseKey = mpi_scsi_tg->SenseKey;
+
+			scsi_tg++;
+			mpi_scsi_tg++;
+		}
+	}
+}
+
 /**
  * _base_get_master_diag_triggers - get master diag trigger values from
  *				persistent pages
@@ -4953,6 +5004,14 @@  _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 	    MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID)
 		_base_get_event_diag_triggers(ioc);
 
+	/*
+	 * Retrieve scsi diag trigger values from driver trigger pg3
+	 * if scsi trigger bit enabled in TriggerFlags.
+	 */
+	if ((u16)trigger_flags &
+	    MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID)
+		_base_get_scsi_diag_triggers(ioc);
+
 }
 
 /**
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 1d381d7..ffc04e6 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1829,11 +1829,17 @@  int
 mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
 	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page);
 int
+mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page);
+int
 mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
 	struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set);
 int
 mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
 	struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set);
+int
+mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set);
 
 /* ctl shared API */
 extern struct device_attribute *mpt3sas_host_attrs[];
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 9bad6a8..ae1caba 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -2187,6 +2187,163 @@  out:
 	return rc;
 }
 
+/**
+ * mpt3sas_config_get_driver_trigger_pg3 - obtain driver trigger page 3
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 3;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_set_driver_trigger_pg3 - write driver trigger page 3
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_config_set_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 3;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	_config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_update_driver_trigger_pg3 - update driver trigger page 3
+ * @ioc: per adapter object
+ * @scsi_tg: scsi trigger list
+ * @set: set ot clear trigger values
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set)
+{
+	Mpi26DriverTriggerPage3_t tg_pg3;
+	Mpi2ConfigReply_t mpi_reply;
+	int rc, i, count;
+	u16 ioc_status;
+
+	rc = mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID, set);
+	if (rc)
+		return rc;
+
+	rc = mpt3sas_config_get_driver_trigger_pg3(ioc, &mpi_reply, &tg_pg3);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		return -EFAULT;
+	}
+
+	if (set) {
+		count = scsi_tg->ValidEntries;
+		tg_pg3.NumSCSISenseTrigger = cpu_to_le16(count);
+		for (i = 0; i < count; i++) {
+			tg_pg3.SCSISenseTriggers[i].ASCQ =
+			    scsi_tg->SCSITriggerEntry[i].ASCQ;
+			tg_pg3.SCSISenseTriggers[i].ASC =
+			    scsi_tg->SCSITriggerEntry[i].ASC;
+			tg_pg3.SCSISenseTriggers[i].SenseKey =
+			    scsi_tg->SCSITriggerEntry[i].SenseKey;
+		}
+	} else {
+		tg_pg3.NumSCSISenseTrigger = 0;
+		memset(&tg_pg3.SCSISenseTriggers[0], 0,
+		    NUM_VALID_ENTRIES * sizeof(
+		    MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY));
+	}
+
+	rc = _config_set_driver_trigger_pg3(ioc, &mpi_reply, &tg_pg3);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n",
+		     __func__, ioc_status));
+		return -EFAULT;
+	}
+
+	return 0;
+out:
+	mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID, !set);
+
+	return rc;
+}
+
 /**
  * mpt3sas_config_get_volume_handle - returns volume handle for give hidden
  * raid components