| Message ID | 20210303144631.3175331-19-lee.jones@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Rid W=1 warnings in SCSI | expand |
On Wed, Mar 3, 2021 at 3:47 PM Lee Jones <lee.jones@linaro.org> wrote: > > Fixes the following W=1 kernel build warning(s): > > drivers/scsi/pm8001/pm8001_hwi.c:1183: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm8001_chip_intx_interrupt_enable() instead > drivers/scsi/pm8001/pm8001_hwi.c:1257: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm8001_chip_interrupt_disable() instead > drivers/scsi/pm8001/pm8001_hwi.c:3235: warning: expecting prototype for asd_get_attached_sas_addr(). Prototype was for pm8001_get_attached_sas_addr() instead > drivers/scsi/pm8001/pm8001_hwi.c:3555: warning: expecting prototype for fw_flash_update_resp(). Prototype was for pm8001_mpi_fw_flash_update_resp() instead > > Cc: Jack Wang <jinpu.wang@cloud.ionos.com> > Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> > Cc: "Martin K. Petersen" <martin.petersen@oracle.com> > Cc: linux-scsi@vger.kernel.org > Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Thanks > --- > drivers/scsi/pm8001/pm8001_hwi.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c > index 49bf2f70a470e..6b600e33e9e8d 100644 > --- a/drivers/scsi/pm8001/pm8001_hwi.c > +++ b/drivers/scsi/pm8001/pm8001_hwi.c > @@ -1175,7 +1175,7 @@ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha) > > #ifndef PM8001_USE_MSIX > /** > - * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt > + * pm8001_chip_intx_interrupt_enable - enable PM8001 chip interrupt > * @pm8001_ha: our hba card information > */ > static void > @@ -1248,7 +1248,7 @@ pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) > } > > /** > - * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt > + * pm8001_chip_interrupt_disable - disable PM8001 chip interrupt > * @pm8001_ha: our hba card information > * @vec: unused > */ > @@ -3219,7 +3219,7 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate) > } > > /** > - * asd_get_attached_sas_addr -- extract/generate attached SAS address > + * pm8001_get_attached_sas_addr - extract/generate attached SAS address > * @phy: pointer to asd_phy > * @sas_addr: pointer to buffer where the SAS address is to be written > * > @@ -3546,7 +3546,7 @@ int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) > } > > /** > - * fw_flash_update_resp - Response from FW for flash update command. > + * pm8001_mpi_fw_flash_update_resp - Response from FW for flash update command. > * @pm8001_ha: our hba card information > * @piomb: IO message buffer > */ > -- > 2.27.0 >
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 49bf2f70a470e..6b600e33e9e8d 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -1175,7 +1175,7 @@ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha) #ifndef PM8001_USE_MSIX /** - * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt + * pm8001_chip_intx_interrupt_enable - enable PM8001 chip interrupt * @pm8001_ha: our hba card information */ static void @@ -1248,7 +1248,7 @@ pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) } /** - * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt + * pm8001_chip_interrupt_disable - disable PM8001 chip interrupt * @pm8001_ha: our hba card information * @vec: unused */ @@ -3219,7 +3219,7 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate) } /** - * asd_get_attached_sas_addr -- extract/generate attached SAS address + * pm8001_get_attached_sas_addr - extract/generate attached SAS address * @phy: pointer to asd_phy * @sas_addr: pointer to buffer where the SAS address is to be written * @@ -3546,7 +3546,7 @@ int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * fw_flash_update_resp - Response from FW for flash update command. + * pm8001_mpi_fw_flash_update_resp - Response from FW for flash update command. * @pm8001_ha: our hba card information * @piomb: IO message buffer */
Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_hwi.c:1183: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm8001_chip_intx_interrupt_enable() instead drivers/scsi/pm8001/pm8001_hwi.c:1257: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm8001_chip_interrupt_disable() instead drivers/scsi/pm8001/pm8001_hwi.c:3235: warning: expecting prototype for asd_get_attached_sas_addr(). Prototype was for pm8001_get_attached_sas_addr() instead drivers/scsi/pm8001/pm8001_hwi.c:3555: warning: expecting prototype for fw_flash_update_resp(). Prototype was for pm8001_mpi_fw_flash_update_resp() instead Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/scsi/pm8001/pm8001_hwi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)