diff mbox series

[10/16] lpfc: Fix lpfc_hdw_queue attribute being ignored

Message ID 20210410173034.67618-11-jsmart2021@gmail.com (mailing list archive)
State Superseded
Headers show
Series lpfc: Update lpfc to revision 12.8.0.9 | expand

Commit Message

James Smart April 10, 2021, 5:30 p.m. UTC 
The lpfc_hdw_queue attribute is to set the number of hardware queues
to be created on the adapter. Normally, the value is set to a default,
which allows the hw queue count to be sized dynamically based on
adapter capabilities, cpu/platform architecture, or cpu type. Currently,
when lpfc_hdw_queue is set to a specific value, is has no effect and
the dynamic sizing occurs.

The routine checking whether parameters are default or not ignores the
lpfc_hdw_queue setting and invokes the dynamic logic.

Fix the routine to additionally check the lpfc_hdw_queue attribute value
before using dynamic scaling. Additionally, SLI-3 supports only a small
number of queues with dedicated functions, thus it needs to be exempted
from the variable scaling and set to the expected values.

Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
 drivers/scsi/lpfc/lpfc_attr.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index b253be355b4f..b703fe3b606e 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -5815,7 +5815,9 @@  lpfc_irq_chann_init(struct lpfc_hba *phba, uint32_t val)
 	}
 
 	/* Check if default setting was passed */
-	if (val == LPFC_IRQ_CHANN_DEF)
+	if (val == LPFC_IRQ_CHANN_DEF &&
+	    phba->cfg_hdw_queue == LPFC_HBA_HDWQ_DEF &&
+	    phba->sli_rev == LPFC_SLI_REV4)
 		lpfc_assign_default_irq_chann(phba);
 
 	if (phba->irq_chann_mode != NORMAL_MODE) {
@@ -5854,7 +5856,12 @@  lpfc_irq_chann_init(struct lpfc_hba *phba, uint32_t val)
 			phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF;
 			return -EINVAL;
 		}
-		phba->cfg_irq_chann = val;
+		if (phba->sli_rev == LPFC_SLI_REV4) {
+			phba->cfg_irq_chann = val;
+		} else {
+			phba->cfg_irq_chann = 2;
+			phba->cfg_hdw_queue = 1;
+		}
 	}
 
 	return 0;
@@ -7411,7 +7418,8 @@  lpfc_get_cfgparam(struct lpfc_hba *phba)
 		phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu;
 	if (phba->cfg_irq_chann == 0)
 		phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu;
-	if (phba->cfg_irq_chann > phba->cfg_hdw_queue)
+	if (phba->cfg_irq_chann > phba->cfg_hdw_queue &&
+	    phba->sli_rev == LPFC_SLI_REV4)
 		phba->cfg_irq_chann = phba->cfg_hdw_queue;
 
 	phba->cfg_soft_wwnn = 0L;