@@ -487,8 +487,8 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr,
atomic_read(&lport->xmt_fcp_noxri),
atomic_read(&lport->xmt_fcp_bad_ndlp),
atomic_read(&lport->xmt_fcp_qdepth),
- atomic_read(&lport->xmt_fcp_err),
- atomic_read(&lport->xmt_fcp_wqerr));
+ atomic_read(&lport->xmt_fcp_wqerr),
+ atomic_read(&lport->xmt_fcp_err));
if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
goto buffer_done;
@@ -1176,8 +1176,7 @@ lpfc_emptyq_wait(struct lpfc_hba *phba, struct list_head *q, spinlock_t *lock)
msleep(20);
if (cnt++ > 250) { /* 5 secs */
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "0466 %s %s\n",
- "Outstanding IO when ",
+ "0466 Outstanding IO when "
"bringing Adapter offline\n");
return 0;
}
@@ -5929,7 +5928,7 @@ LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature.");
LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
/*
-# lpfc_prot_mask: i
+# lpfc_prot_mask:
# - Bit mask of host protection capabilities used to register with the
# SCSI mid-layer
# - Only meaningful if BG is turned on (lpfc_enable_bg=1).
@@ -5954,7 +5953,7 @@ LPFC_ATTR(prot_mask,
"T10-DIF host protection capabilities mask");
/*
-# lpfc_prot_guard: i
+# lpfc_prot_guard:
# - Bit mask of protection guard types to register with the SCSI mid-layer
# - Guard types are currently either 1) T10-DIF CRC 2) IP checksum
# - Allows you to ultimately specify which profiles to use
@@ -3878,7 +3878,7 @@ lpfc_bsg_sli_cfg_dma_desc_setup(struct lpfc_hba *phba, enum nemb_type nemb_tp,
* @dmabuf: Pointer to a DMA buffer descriptor.
*
* This routine performs SLI_CONFIG (0x9B) read mailbox command operation with
- * non-embedded external bufffers.
+ * non-embedded external buffers.
**/
static int
lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
@@ -4067,7 +4067,7 @@ lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
* @dmabuf: Pointer to a DMA buffer descriptor.
*
* This routine performs SLI_CONFIG (0x9B) write mailbox command operation with
- * non-embedded external bufffers.
+ * non-embedded external buffers.
**/
static int
lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
@@ -4211,7 +4211,7 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
goto job_error;
}
- /* wait for additoinal external buffers */
+ /* wait for additional external buffers */
bsg_reply->result = 0;
bsg_job_done(job, bsg_reply->result,
@@ -4233,8 +4233,8 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
* @dmabuf: Pointer to a DMA buffer descriptor.
*
* This routine handles SLI_CONFIG (0x9B) mailbox command with non-embedded
- * external bufffers, including both 0x9B with non-embedded MSEs and 0x9B
- * with embedded sussystem 0x1 and opcodes with external HBDs.
+ * external buffers, including both 0x9B with non-embedded MSEs and 0x9B
+ * with embedded subsystem 0x1 and opcodes with external HBDs.
**/
static int
lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct bsg_job *job,
@@ -4559,7 +4559,7 @@ lpfc_bsg_write_ebuf_set(struct lpfc_hba *phba, struct bsg_job *job,
goto job_error;
}
- /* wait for additoinal external buffers */
+ /* wait for additional external buffers */
bsg_reply->result = 0;
bsg_job_done(job, bsg_reply->result,
bsg_reply->reply_payload_rcv_len);
@@ -4625,7 +4625,7 @@ lpfc_bsg_handle_sli_cfg_ebuf(struct lpfc_hba *phba, struct bsg_job *job,
* @job: Pointer to the job object.
* @dmabuf: Pointer to a DMA buffer descriptor.
*
- * This routine checkes and handles non-embedded multi-buffer SLI_CONFIG
+ * This routine checks and handles non-embedded multi-buffer SLI_CONFIG
* (0x9B) mailbox commands and external buffers.
**/
static int
@@ -4703,7 +4703,7 @@ lpfc_bsg_handle_sli_cfg_ext(struct lpfc_hba *phba, struct bsg_job *job,
* from the mailbox pool, copy the caller mailbox command.
*
* If offline and the sli is active we need to poll for the command (port is
- * being reset) and com-plete the job, otherwise issue the mailbox command and
+ * being reset) and complete the job, otherwise issue the mailbox command and
* let our completion handler finish the command.
**/
static int
@@ -4378,7 +4378,7 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
irsp->ulpStatus, irsp->un.ulpWord[4], ndlp->nlp_DID);
/* ACC to LOGO completes to NPort <nlp_DID> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
- "0109 ACC to LOGO completes to NPort x%x refcnt %d"
+ "0109 ACC to LOGO completes to NPort x%x refcnt %d "
"Data: x%x x%x x%x\n",
ndlp->nlp_DID, kref_read(&ndlp->kref), ndlp->nlp_flag,
ndlp->nlp_state, ndlp->nlp_rpi);
@@ -4783,7 +4783,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
}
/**
- * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command
+ * lpfc_els_rsp_reject - Prepare and issue a rjt response iocb command
* @vport: pointer to a virtual N_Port data structure.
* @rejectError: reject response to issue
* @oldiocb: pointer to the original lpfc command iocb data structure.
@@ -340,7 +340,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
sp = (struct serv_parm *) ((uint8_t *) lp + sizeof (uint32_t));
if (wwn_to_u64(sp->portName.u.wwn) == 0) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
- "0140 PLOGI Reject: invalid nname\n");
+ "0140 PLOGI Reject: invalid pname\n");
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
stat.un.b.lsRjtRsnCodeExp = LSEXP_INVALID_PNAME;
lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp,
@@ -349,7 +349,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
}
if (wwn_to_u64(sp->nodeName.u.wwn) == 0) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
- "0141 PLOGI Reject: invalid pname\n");
+ "0141 PLOGI Reject: invalid nname\n");
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
stat.un.b.lsRjtRsnCodeExp = LSEXP_INVALID_NNAME;
lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp,
@@ -935,7 +935,7 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba)
* @phba: Pointer to HBA context object.
* @xritag: XRI value.
*
- * This function clears the sglq pointer from the array of acive
+ * This function clears the sglq pointer from the array of active
* sglq's. The xritag that is passed in is used to index into the
* array. Before the xritag can be used it needs to be adjusted
* by subtracting the xribase.
@@ -957,7 +957,7 @@ __lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
* @phba: Pointer to HBA context object.
* @xritag: XRI value.
*
- * This function returns the sglq pointer from the array of acive
+ * This function returns the sglq pointer from the array of active
* sglq's. The xritag that is passed in is used to index into the
* array. Before the xritag can be used it needs to be adjusted
* by subtracting the xribase.
@@ -14851,7 +14851,7 @@ lpfc_sli4_hba_intr_handler(int irq, void *dev_id)
}
return IRQ_HANDLED;
-} /* lpfc_sli4_fp_intr_handler */
+} /* lpfc_sli4_hba_intr_handler */
/**
* lpfc_sli4_intr_handler - Device-level interrupt handler for SLI-4 device
@@ -18106,7 +18106,7 @@ lpfc_sli4_xri_inrange(struct lpfc_hba *phba,
/**
* lpfc_sli4_seq_abort_rsp - bls rsp to sequence abort
- * @vport: pointer to a vitural port.
+ * @vport: pointer to a virtual port.
* @fc_hdr: pointer to a FC frame header.
* @aborted: was the partially assembled receive sequence successfully aborted
*