@@ -68,6 +68,8 @@
#define CSIO_MAX_LUN 0xFFFF
#define CSIO_MAX_QUEUE 2048
+#define CSIO_TMF_TAG (CSIO_MAX_QUEUE - 1)
+
#define CSIO_MAX_CMD_PER_LUN 32
#define CSIO_MAX_DDP_BUF_SIZE (1024 * 1024)
#define CSIO_MAX_SECTOR_SIZE 128
@@ -621,7 +621,7 @@ csio_shost_init(struct csio_hw *hw, struct device *dev,
/* Link common lnode to this lnode */
ln->dev_num = (shost->host_no << 16);
- shost->can_queue = CSIO_MAX_QUEUE;
+ shost->can_queue = CSIO_MAX_QUEUE - 1;
shost->this_id = -1;
shost->unique_id = shost->host_no;
shost->max_cmd_len = 16; /* Max CDB length supported */
@@ -2052,17 +2052,20 @@ csio_tm_cbfn(struct csio_hw *hw, struct csio_ioreq *req)
/* Wake up the TM handler thread */
csio_scsi_cmnd(req) = NULL;
+ cmnd->host_scribble = NULL;
}
static int
csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
{
- struct csio_lnode *ln = shost_priv(cmnd->device->host);
+ struct scsi_device *sdev = cmnd->device;
+ struct csio_lnode *ln = shost_priv(sdev->host);
struct csio_hw *hw = csio_lnode_to_hw(ln);
struct csio_scsim *scsim = csio_hw_to_scsim(hw);
- struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata);
+ struct csio_rnode *rn = (struct csio_rnode *)(sdev->hostdata);
struct csio_ioreq *ioreq = NULL;
struct csio_scsi_qset *sqset;
+ struct scsi_cmnd *tmf_cmnd;
unsigned long flags;
int retval;
int count, ret;
@@ -2073,13 +2076,13 @@ csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
goto fail;
csio_dbg(hw, "Request to reset LUN:%llu (ssni:0x%x tgtid:%d)\n",
- cmnd->device->lun, rn->flowid, rn->scsi_id);
+ sdev->lun, rn->flowid, rn->scsi_id);
if (!csio_is_lnode_ready(ln)) {
csio_err(hw,
"LUN reset cannot be issued on non-ready"
" local node vnpi:0x%x (LUN:%llu)\n",
- ln->vnp_flowid, cmnd->device->lun);
+ ln->vnp_flowid, sdev->lun);
goto fail;
}
@@ -2099,7 +2102,15 @@ csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
csio_err(hw,
"LUN reset cannot be issued on non-ready"
" remote node ssni:0x%x (LUN:%llu)\n",
- rn->flowid, cmnd->device->lun);
+ rn->flowid, sdev->lun);
+ goto fail;
+ }
+
+ tmf_cmnd = scsi_host_find_tag(sdev->host, CSIO_TMF_TAG);
+ if (!tmf_cmnd || tmf_cmnd->host_scribble) {
+ csio_err(hw,
+ "LUN reset TMF already busy (LUN:%llu)\n",
+ sdev->lun);
goto fail;
}
@@ -2119,11 +2130,12 @@ csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
ioreq->iq_idx = sqset->iq_idx;
ioreq->eq_idx = sqset->eq_idx;
- csio_scsi_cmnd(ioreq) = cmnd;
- cmnd->host_scribble = (unsigned char *)ioreq;
- cmnd->SCp.Status = 0;
+ csio_scsi_cmnd(ioreq) = tmf_cmnd;
+ tmf_cmnd->host_scribble = (unsigned char *)ioreq;
+ tmf_cmnd->SCp.Status = 0;
+ tmf_cmnd->device = sdev;
- cmnd->SCp.Message = FCP_TMF_LUN_RESET;
+ tmf_cmnd->SCp.Message = FCP_TMF_LUN_RESET;
ioreq->tmo = CSIO_SCSI_LUNRST_TMO_MS / 1000;
/*
@@ -2140,7 +2152,7 @@ csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
sld.level = CSIO_LEV_LUN;
sld.lnode = ioreq->lnode;
sld.rnode = ioreq->rnode;
- sld.oslun = cmnd->device->lun;
+ sld.oslun = sdev->lun;
spin_lock_irqsave(&hw->lock, flags);
/* Kick off TM SM on the ioreq */
@@ -2150,6 +2162,7 @@ csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
if (retval != 0) {
csio_err(hw, "Failed to issue LUN reset, req:%p, status:%d\n",
ioreq, retval);
+ tmf_cmnd->host_scribble = NULL;
goto fail_ret_ioreq;
}
@@ -2163,20 +2176,21 @@ csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
/* LUN reset timed-out */
if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) {
csio_err(hw, "LUN reset (%d:%llu) timed out\n",
- cmnd->device->id, cmnd->device->lun);
+ sdev->id, sdev->lun);
spin_lock_irq(&hw->lock);
csio_scsi_drvcleanup(ioreq);
list_del_init(&ioreq->sm.sm_list);
spin_unlock_irq(&hw->lock);
+ tmf_cmnd->host_scribble = NULL;
goto fail_ret_ioreq;
}
/* LUN reset returned, check cached status */
- if (cmnd->SCp.Status != FW_SUCCESS) {
+ if (tmf_cmnd->SCp.Status != FW_SUCCESS) {
csio_err(hw, "LUN reset failed (%d:%llu), status: %d\n",
- cmnd->device->id, cmnd->device->lun, cmnd->SCp.Status);
+ sdev->id, sdev->lun, tmf_cmnd->SCp.Status);
goto fail;
}
@@ -2196,7 +2210,7 @@ csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
if (retval != 0) {
csio_err(hw,
"Attempt to abort I/Os during LUN reset of %llu"
- " returned %d\n", cmnd->device->lun, retval);
+ " returned %d\n", sdev->lun, retval);
/* Return I/Os back to active_q */
spin_lock_irq(&hw->lock);
list_splice_tail_init(&local_q, &scsim->active_q);
@@ -2207,7 +2221,7 @@ csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
CSIO_INC_STATS(rn, n_lun_rst);
csio_info(hw, "LUN reset occurred (%d:%llu)\n",
- cmnd->device->id, cmnd->device->lun);
+ sdev->id, sdev->lun);
return SUCCESS;
Set one command aside as a TMF command, and use this command to send the TMF. This avoids having to rely on the passed-in scsi command when resetting the device. Signed-off-by: Hannes Reinecke <hare@suse.com> --- drivers/scsi/csiostor/csio_hw.h | 2 ++ drivers/scsi/csiostor/csio_init.c | 2 +- drivers/scsi/csiostor/csio_scsi.c | 44 ++++++++++++++++++++----------- 3 files changed, 32 insertions(+), 16 deletions(-)