| Message ID | 20211208013534.136590-4-ebiggers@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | block: show crypto capabilities in sysfs | expand |
On 12/7/21 5:35 PM, Eric Biggers wrote: > +What: /sys/block/<disk>/queue/crypto/modes/<mode> > +Date: December 2021 > +Contact: linux-block@vger.kernel.org > +Description: > + [RO] For each crypto mode (i.e., encryption/decryption > + algorithm) the device supports with inline encryption, a file > + will exist at this location. It will contain a hexadecimal > + number that is a bitmask of the supported data unit sizes, in > + bytes, for that crypto mode. > + > + Currently, the crypto modes that may be supported are: > + > + * AES-256-XTS > + * AES-128-CBC-ESSIV > + * Adiantum > + > + For example, if a device supports AES-256-XTS inline encryption > + with data unit sizes of 512 and 4096 bytes, the file > + /sys/block/<disk>/queue/crypto/modes/AES-256-XTS will exist and > + will contain "0x1200". So a bitmask is used to combine multiple values into a single number? Has it been considered to report each value separately, e.g. 512\n4096\n instead of 0x1200\n? I think the former approach is more friendly for shell scripts. > +struct blk_crypto_attr { > + struct attribute attr; > + ssize_t (*show)(struct blk_crypto_profile *profile, > + struct blk_crypto_attr *attr, char *page); > +}; It is not clear to me why this structure has been introduced instead of using the existing kobj_attribute structure? > +static int __init blk_crypto_sysfs_init(void) > +{ > + int i; > + > + BUILD_BUG_ON(BLK_ENCRYPTION_MODE_INVALID != 0); > + for (i = 1; i < BLK_ENCRYPTION_MODE_MAX; i++) { > + struct blk_crypto_attr *attr = &__blk_crypto_mode_attrs[i]; > + > + attr->attr.name = blk_crypto_modes[i].name; > + attr->attr.mode = 0444; > + attr->show = blk_crypto_mode_show; > + blk_crypto_mode_attrs[i - 1] = &attr->attr; > + } > + return 0; > +} > +subsys_initcall(blk_crypto_sysfs_init); Would it be possible to remove the use of subsys_initcall() if the crypto attributes and blk_crypto_modes[] would be defined in the same file? Thanks, Bart.
On Thu, Dec 09, 2021 at 02:51:59PM -0800, Bart Van Assche wrote: > On 12/7/21 5:35 PM, Eric Biggers wrote: > > +What: /sys/block/<disk>/queue/crypto/modes/<mode> > > +Date: December 2021 > > +Contact: linux-block@vger.kernel.org > > +Description: > > + [RO] For each crypto mode (i.e., encryption/decryption > > + algorithm) the device supports with inline encryption, a file > > + will exist at this location. It will contain a hexadecimal > > + number that is a bitmask of the supported data unit sizes, in > > + bytes, for that crypto mode. > > + > > + Currently, the crypto modes that may be supported are: > > + > > + * AES-256-XTS > > + * AES-128-CBC-ESSIV > > + * Adiantum > > + > > + For example, if a device supports AES-256-XTS inline encryption > > + with data unit sizes of 512 and 4096 bytes, the file > > + /sys/block/<disk>/queue/crypto/modes/AES-256-XTS will exist and > > + will contain "0x1200". > > So a bitmask is used to combine multiple values into a single number? You could think of it that way, yes. > Has it been considered to report each value separately, e.g. 512\n4096\n > instead of 0x1200\n? I think the former approach is more friendly for shell > scripts. I don't think that would be acceptable to the sysfs folks, as they only allow one value per file. I suppose a bitmask could be viewed as unacceptable too, but it seemed to make sense here, given that the data unit sizes are always powers of 2, and the hardware reports them as bitmasks. Greg already reviewed this patch, but maybe he wasn't looking at this part. Greg, any opinion on the best way to report a set of power-of-2 values via sysfs? > > > +struct blk_crypto_attr { > > + struct attribute attr; > > + ssize_t (*show)(struct blk_crypto_profile *profile, > > + struct blk_crypto_attr *attr, char *page); > > +}; > > It is not clear to me why this structure has been introduced instead of using the > existing kobj_attribute structure? kobj_attribute isn't strongly-typed to the specific type of kobject. It also includes a store function pointer, which is not necessary here. What I'm doing here is very common; take a look at some other code that implements sysfs attributes. Even block/blk-sysfs.c. > > +static int __init blk_crypto_sysfs_init(void) > > +{ > > + int i; > > + > > + BUILD_BUG_ON(BLK_ENCRYPTION_MODE_INVALID != 0); > > + for (i = 1; i < BLK_ENCRYPTION_MODE_MAX; i++) { > > + struct blk_crypto_attr *attr = &__blk_crypto_mode_attrs[i]; > > + > > + attr->attr.name = blk_crypto_modes[i].name; > > + attr->attr.mode = 0444; > > + attr->show = blk_crypto_mode_show; > > + blk_crypto_mode_attrs[i - 1] = &attr->attr; > > + } > > + return 0; > > +} > > +subsys_initcall(blk_crypto_sysfs_init); > > Would it be possible to remove the use of subsys_initcall() if the crypto attributes and > blk_crypto_modes[] would be defined in the same file? I want to make it so that all crypto modes show up in sysfs without having to write extra code every time a new crypto mode is added. That's not possible if the attributes are defined statically. Defining them in the same array would come close, since then it would be hard for people to forgot to update one place and not the other. But that would mix together the sysfs support and the core blk-crypto support, which seems undesirable. - Eric
On 12/9/21 3:40 PM, Eric Biggers wrote: > On Thu, Dec 09, 2021 at 02:51:59PM -0800, Bart Van Assche wrote: >> Has it been considered to report each value separately, e.g. 512\n4096\n >> instead of 0x1200\n? I think the former approach is more friendly for shell >> scripts. > > I don't think that would be acceptable to the sysfs folks, as they only allow > one value per file. I suppose a bitmask could be viewed as unacceptable too, > but it seemed to make sense here, given that the data unit sizes are always > powers of 2, and the hardware reports them as bitmasks. In case Greg wouldn't have the time to reply, I think the following quote from Documentation/filesystems/sysfs.txt is relevant in this context: "Attributes should be ASCII text files, preferably with only one value per file. It is noted that it may not be efficient to contain only one value per file, so it is socially acceptable to express an array of values of the same type." Thanks, Bart.
On Thu, Dec 09, 2021 at 04:02:07PM -0800, Bart Van Assche wrote: > On 12/9/21 3:40 PM, Eric Biggers wrote: > > On Thu, Dec 09, 2021 at 02:51:59PM -0800, Bart Van Assche wrote: > > > Has it been considered to report each value separately, e.g. 512\n4096\n > > > instead of 0x1200\n? I think the former approach is more friendly for shell > > > scripts. > > > > I don't think that would be acceptable to the sysfs folks, as they only allow > > one value per file. I suppose a bitmask could be viewed as unacceptable too, > > but it seemed to make sense here, given that the data unit sizes are always > > powers of 2, and the hardware reports them as bitmasks. > > In case Greg wouldn't have the time to reply, I think the following quote from > Documentation/filesystems/sysfs.txt is relevant in this context: "Attributes > should be ASCII text files, preferably with only one value per file. It is > noted that it may not be efficient to contain only one value per file, so it is > socially acceptable to express an array of values of the same type." > > Thanks, It should be, but I thought that Greg had complained about people doing that before, and required strictly one value per file. So we would need his opinion. Note that a bitmask isn't hard to handle in a shell script: mask=$(</sys/block/sda/queue/crypto/modes/AES-256-XTS) if (( mask & 4096 )); then echo "4096-byte data units supported" fi But I could see how someone could prefer something like if grep -q '\<4096\>' /sys/block/sda/queue/crypto/modes/AES-256-XTS; then echo "4096-byte data units supported" fi - Eric
On Thu, Dec 09, 2021 at 03:40:46PM -0800, Eric Biggers wrote: > On Thu, Dec 09, 2021 at 02:51:59PM -0800, Bart Van Assche wrote: > > On 12/7/21 5:35 PM, Eric Biggers wrote: > > > +What: /sys/block/<disk>/queue/crypto/modes/<mode> > > > +Date: December 2021 > > > +Contact: linux-block@vger.kernel.org > > > +Description: > > > + [RO] For each crypto mode (i.e., encryption/decryption > > > + algorithm) the device supports with inline encryption, a file > > > + will exist at this location. It will contain a hexadecimal > > > + number that is a bitmask of the supported data unit sizes, in > > > + bytes, for that crypto mode. > > > + > > > + Currently, the crypto modes that may be supported are: > > > + > > > + * AES-256-XTS > > > + * AES-128-CBC-ESSIV > > > + * Adiantum > > > + > > > + For example, if a device supports AES-256-XTS inline encryption > > > + with data unit sizes of 512 and 4096 bytes, the file > > > + /sys/block/<disk>/queue/crypto/modes/AES-256-XTS will exist and > > > + will contain "0x1200". > > > > So a bitmask is used to combine multiple values into a single number? > > You could think of it that way, yes. > > > Has it been considered to report each value separately, e.g. 512\n4096\n > > instead of 0x1200\n? I think the former approach is more friendly for shell > > scripts. No multi-line outputs in sysfs please. If you have to do a "selection from an array", that is not how to do it. Look at the output of /sys/power/pm_test/ as one way you can do it if you have to choose one option from a list: $ cat /sys/power/pm_test [none] core processors platform devices freezer But I don't think that applies here, right? > I don't think that would be acceptable to the sysfs folks, as they only allow > one value per file. I suppose a bitmask could be viewed as unacceptable too, > but it seemed to make sense here, given that the data unit sizes are always > powers of 2, and the hardware reports them as bitmasks. > > Greg already reviewed this patch, but maybe he wasn't looking at this part. > > Greg, any opinion on the best way to report a set of power-of-2 values via > sysfs? A single hex value makes sense to me. thanks, greg k-h
On 12/9/21 10:42 PM, Greg Kroah-Hartman wrote:
> A single hex value makes sense to me.
Hi Greg,
I'm not enthusiast about this approach because:
(a) A single hex value can be confused with a number. Reporting a bitfield in
hex format is not sufficient to prevent confusion with a number.
(b) No other block layer sysfs attribute follows this encoding scheme.
(c) This encoding enforces the restriction that data unit sizes are a power of
two. Is there anything fundamental in encryption that restricts data unit
sizes to a power of two? I don't know the answer myself.
Thanks,
Bart.
On Fri, Dec 10, 2021 at 09:29:41AM -0800, Bart Van Assche wrote: > (c) This encoding enforces the restriction that data unit sizes are a power of > two. Is there anything fundamental in encryption that restricts data unit > sizes to a power of two? I don't know the answer myself. Well, the data unit size has to evenly divide the size of the request (for requests that have an encryption context which specifies that data unit size). So if the data unit size was, say, 1536 bytes, then all requests would have to be multiples of 1536 bytes. That has a factor of 3 in it, so it would be impossible to make any power-of-2 size request. That sounds pretty impractical; it's hard to see how and why we would ever support such a thing. - Eric
On Fri, Dec 10, 2021 at 09:29:41AM -0800, Bart Van Assche wrote: > On 12/9/21 10:42 PM, Greg Kroah-Hartman wrote: > > A single hex value makes sense to me. > > Hi Greg, > > I'm not enthusiast about this approach because: > (a) A single hex value can be confused with a number. Reporting a bitfield in > hex format is not sufficient to prevent confusion with a number. Each sysfs file has their own "units" or values, or whatever. So a hex number or bitfield or something else is fine. Again, single value, no need to parse, is the key here. > (b) No other block layer sysfs attribute follows this encoding scheme. Then follow what they do. Do they have multiple values in a single file? If so, they are broken and we should change that. > (c) This encoding enforces the restriction that data unit sizes are a power of > two. Is there anything fundamental in encryption that restricts data unit > sizes to a power of two? I don't know the answer myself. Again, you all can pick the rules you want for this file, if you want to have bitfields, wonderful! If you want to make it an enum, wonderful! thanks, greg k-h
On 12/11/21 02:50, Greg Kroah-Hartman wrote: > On Fri, Dec 10, 2021 at 09:29:41AM -0800, Bart Van Assche wrote: >> (b) No other block layer sysfs attribute follows this encoding scheme. > > Then follow what they do. Do they have multiple values in a single > file? If so, they are broken and we should change that. Hi Greg, The only other block layer sysfs attribute I know of that reports multiple values is the queue/scheduler attribute. Here is an example of the output that can be produced by reading that attribute: # cat /sys/block/sda/queue/scheduler [mq-deadline] kyber bfq none I don't think that changing the behavior of that attribute is an option because that would break existing user space software, e.g. the https://github.com/osandov/blktests/ test suite. Thanks, Bart.
On 12/13/21 9:04 PM, Bart Van Assche wrote: > External email: Use caution opening links or attachments > > > On 12/11/21 02:50, Greg Kroah-Hartman wrote: >> On Fri, Dec 10, 2021 at 09:29:41AM -0800, Bart Van Assche wrote: >>> (b) No other block layer sysfs attribute follows this encoding scheme. >> >> Then follow what they do. Do they have multiple values in a single >> file? If so, they are broken and we should change that. > > Hi Greg, > > The only other block layer sysfs attribute I know of that reports > multiple values is the queue/scheduler attribute. Here is an example of > the output that can be produced by reading that attribute: > > # cat /sys/block/sda/queue/scheduler > [mq-deadline] kyber bfq none > > I don't think that changing the behavior of that attribute is an option > because that would break existing user space software, e.g. the > https://github.com/osandov/blktests/ test suite. > > Thanks, > > Bart. If possible please avoid changing these values.
On Mon, Dec 13, 2021 at 09:04:29PM -0800, Bart Van Assche wrote: > On 12/11/21 02:50, Greg Kroah-Hartman wrote: > > On Fri, Dec 10, 2021 at 09:29:41AM -0800, Bart Van Assche wrote: > > > (b) No other block layer sysfs attribute follows this encoding scheme. > > > > Then follow what they do. Do they have multiple values in a single > > file? If so, they are broken and we should change that. > > Hi Greg, > > The only other block layer sysfs attribute I know of that reports multiple > values is the queue/scheduler attribute. Here is an example of the output > that can be produced by reading that attribute: > > # cat /sys/block/sda/queue/scheduler > [mq-deadline] kyber bfq none That's fine, there is no problem there. That output is the "correct" way to show a list of options and the one that is currently selected in a sysfs file as I thought I said earlier in this thread. > I don't think that changing the behavior of that attribute is an option > because that would break existing user space software, e.g. the > https://github.com/osandov/blktests/ test suite. Very true, do not change this file format. thanks, greg k-h
diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index e988742a54a4c..b97a8cf7c3ad0 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -155,6 +155,55 @@ Description: last zone of the device which may be smaller. +What: /sys/block/<disk>/queue/crypto/ +Date: December 2021 +Contact: linux-block@vger.kernel.org +Description: + The presence of this subdirectory of /sys/block/<disk>/queue/ + indicates that the device supports inline encryption. This + subdirectory contains files which describe the inline encryption + capabilities of the device. For more information about inline + encryption, refer to Documentation/block/inline-encryption.rst. + + +What: /sys/block/<disk>/queue/crypto/max_dun_bits +Date: December 2021 +Contact: linux-block@vger.kernel.org +Description: + [RO] This file shows the maximum length, in bits, of data unit + numbers accepted by the device in inline encryption requests. + + +What: /sys/block/<disk>/queue/crypto/modes/<mode> +Date: December 2021 +Contact: linux-block@vger.kernel.org +Description: + [RO] For each crypto mode (i.e., encryption/decryption + algorithm) the device supports with inline encryption, a file + will exist at this location. It will contain a hexadecimal + number that is a bitmask of the supported data unit sizes, in + bytes, for that crypto mode. + + Currently, the crypto modes that may be supported are: + + * AES-256-XTS + * AES-128-CBC-ESSIV + * Adiantum + + For example, if a device supports AES-256-XTS inline encryption + with data unit sizes of 512 and 4096 bytes, the file + /sys/block/<disk>/queue/crypto/modes/AES-256-XTS will exist and + will contain "0x1200". + + +What: /sys/block/<disk>/queue/crypto/num_keyslots +Date: December 2021 +Contact: linux-block@vger.kernel.org +Description: + [RO] This file shows the number of keyslots the device has for + use with inline encryption. + + What: /sys/block/<disk>/queue/dax Date: June 2016 Contact: linux-block@vger.kernel.org diff --git a/block/Makefile b/block/Makefile index f38eaa6129296..3950ecbc5c263 100644 --- a/block/Makefile +++ b/block/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_BLK_DEBUG_FS) += blk-mq-debugfs.o obj-$(CONFIG_BLK_DEBUG_FS_ZONED)+= blk-mq-debugfs-zoned.o obj-$(CONFIG_BLK_SED_OPAL) += sed-opal.o obj-$(CONFIG_BLK_PM) += blk-pm.o -obj-$(CONFIG_BLK_INLINE_ENCRYPTION) += blk-crypto.o blk-crypto-profile.o +obj-$(CONFIG_BLK_INLINE_ENCRYPTION) += blk-crypto.o blk-crypto-profile.o \ + blk-crypto-sysfs.o obj-$(CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK) += blk-crypto-fallback.o obj-$(CONFIG_BLOCK_HOLDER_DEPRECATED) += holder.o diff --git a/block/blk-crypto-internal.h b/block/blk-crypto-internal.h index 2fb0d65a464ca..e6818ffaddbf8 100644 --- a/block/blk-crypto-internal.h +++ b/block/blk-crypto-internal.h @@ -11,6 +11,7 @@ /* Represents a crypto mode supported by blk-crypto */ struct blk_crypto_mode { + const char *name; /* name of this mode, shown in sysfs */ const char *cipher_str; /* crypto API name (for fallback case) */ unsigned int keysize; /* key size in bytes */ unsigned int ivsize; /* iv size in bytes */ @@ -20,6 +21,10 @@ extern const struct blk_crypto_mode blk_crypto_modes[]; #ifdef CONFIG_BLK_INLINE_ENCRYPTION +int blk_crypto_sysfs_register(struct request_queue *q); + +void blk_crypto_sysfs_unregister(struct request_queue *q); + void bio_crypt_dun_increment(u64 dun[BLK_CRYPTO_DUN_ARRAY_SIZE], unsigned int inc); @@ -62,6 +67,13 @@ static inline bool blk_crypto_rq_is_encrypted(struct request *rq) #else /* CONFIG_BLK_INLINE_ENCRYPTION */ +static inline int blk_crypto_sysfs_register(struct request_queue *q) +{ + return 0; +} + +static inline void blk_crypto_sysfs_unregister(struct request_queue *q) { } + static inline bool bio_crypt_rq_ctx_compatible(struct request *rq, struct bio *bio) { diff --git a/block/blk-crypto-sysfs.c b/block/blk-crypto-sysfs.c new file mode 100644 index 0000000000000..fd93bd2f33b75 --- /dev/null +++ b/block/blk-crypto-sysfs.c @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021 Google LLC + * + * sysfs support for blk-crypto. This file contains the code which exports the + * crypto capabilities of devices via /sys/block/$disk/queue/crypto/. + */ + +#include <linux/blk-crypto-profile.h> + +#include "blk-crypto-internal.h" + +struct blk_crypto_kobj { + struct kobject kobj; + struct blk_crypto_profile *profile; +}; + +struct blk_crypto_attr { + struct attribute attr; + ssize_t (*show)(struct blk_crypto_profile *profile, + struct blk_crypto_attr *attr, char *page); +}; + +static struct blk_crypto_profile *kobj_to_crypto_profile(struct kobject *kobj) +{ + return container_of(kobj, struct blk_crypto_kobj, kobj)->profile; +} + +static struct blk_crypto_attr *attr_to_crypto_attr(struct attribute *attr) +{ + return container_of(attr, struct blk_crypto_attr, attr); +} + +static ssize_t max_dun_bits_show(struct blk_crypto_profile *profile, + struct blk_crypto_attr *attr, char *page) +{ + return sysfs_emit(page, "%u\n", 8 * profile->max_dun_bytes_supported); +} + +static ssize_t num_keyslots_show(struct blk_crypto_profile *profile, + struct blk_crypto_attr *attr, char *page) +{ + return sysfs_emit(page, "%u\n", profile->num_slots); +} + +#define BLK_CRYPTO_RO_ATTR(_name) \ + static struct blk_crypto_attr _name##_attr = __ATTR_RO(_name) + +BLK_CRYPTO_RO_ATTR(max_dun_bits); +BLK_CRYPTO_RO_ATTR(num_keyslots); + +static struct attribute *blk_crypto_attrs[] = { + &max_dun_bits_attr.attr, + &num_keyslots_attr.attr, + NULL, +}; + +static const struct attribute_group blk_crypto_attr_group = { + .attrs = blk_crypto_attrs, +}; + +/* + * The encryption mode attributes. To avoid hard-coding the list of encryption + * modes, these are initialized at boot time by blk_crypto_sysfs_init(). + */ +static struct blk_crypto_attr __blk_crypto_mode_attrs[BLK_ENCRYPTION_MODE_MAX]; +static struct attribute *blk_crypto_mode_attrs[BLK_ENCRYPTION_MODE_MAX + 1]; + +static umode_t blk_crypto_mode_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct blk_crypto_profile *profile = kobj_to_crypto_profile(kobj); + struct blk_crypto_attr *a = attr_to_crypto_attr(attr); + int mode_num = a - __blk_crypto_mode_attrs; + + if (profile->modes_supported[mode_num]) + return 0444; + return 0; +} + +static ssize_t blk_crypto_mode_show(struct blk_crypto_profile *profile, + struct blk_crypto_attr *attr, char *page) +{ + int mode_num = attr - __blk_crypto_mode_attrs; + + return sysfs_emit(page, "0x%x\n", profile->modes_supported[mode_num]); +} + +static const struct attribute_group blk_crypto_modes_attr_group = { + .name = "modes", + .attrs = blk_crypto_mode_attrs, + .is_visible = blk_crypto_mode_is_visible, +}; + +static const struct attribute_group *blk_crypto_attr_groups[] = { + &blk_crypto_attr_group, + &blk_crypto_modes_attr_group, + NULL, +}; + +static ssize_t blk_crypto_attr_show(struct kobject *kobj, + struct attribute *attr, char *page) +{ + struct blk_crypto_profile *profile = kobj_to_crypto_profile(kobj); + struct blk_crypto_attr *a = attr_to_crypto_attr(attr); + + return a->show(profile, a, page); +} + +static const struct sysfs_ops blk_crypto_attr_ops = { + .show = blk_crypto_attr_show, +}; + +static void blk_crypto_release(struct kobject *kobj) +{ + kfree(container_of(kobj, struct blk_crypto_kobj, kobj)); +} + +static struct kobj_type blk_crypto_ktype = { + .default_groups = blk_crypto_attr_groups, + .sysfs_ops = &blk_crypto_attr_ops, + .release = blk_crypto_release, +}; + +/* + * If the request_queue has a blk_crypto_profile, create the "crypto" + * subdirectory in sysfs (/sys/block/$disk/queue/crypto/). + */ +int blk_crypto_sysfs_register(struct request_queue *q) +{ + struct blk_crypto_kobj *obj; + int err; + + if (!q->crypto_profile) + return 0; + + obj = kzalloc(sizeof(*obj), GFP_KERNEL); + if (!obj) + return -ENOMEM; + obj->profile = q->crypto_profile; + + err = kobject_init_and_add(&obj->kobj, &blk_crypto_ktype, &q->kobj, + "crypto"); + if (err) { + kobject_put(&obj->kobj); + return err; + } + q->crypto_kobject = &obj->kobj; + return 0; +} + +void blk_crypto_sysfs_unregister(struct request_queue *q) +{ + kobject_put(q->crypto_kobject); +} + +static int __init blk_crypto_sysfs_init(void) +{ + int i; + + BUILD_BUG_ON(BLK_ENCRYPTION_MODE_INVALID != 0); + for (i = 1; i < BLK_ENCRYPTION_MODE_MAX; i++) { + struct blk_crypto_attr *attr = &__blk_crypto_mode_attrs[i]; + + attr->attr.name = blk_crypto_modes[i].name; + attr->attr.mode = 0444; + attr->show = blk_crypto_mode_show; + blk_crypto_mode_attrs[i - 1] = &attr->attr; + } + return 0; +} +subsys_initcall(blk_crypto_sysfs_init); diff --git a/block/blk-crypto.c b/block/blk-crypto.c index ec9efeeeca918..f8a36c723a987 100644 --- a/block/blk-crypto.c +++ b/block/blk-crypto.c @@ -19,16 +19,19 @@ const struct blk_crypto_mode blk_crypto_modes[] = { [BLK_ENCRYPTION_MODE_AES_256_XTS] = { + .name = "AES-256-XTS", .cipher_str = "xts(aes)", .keysize = 64, .ivsize = 16, }, [BLK_ENCRYPTION_MODE_AES_128_CBC_ESSIV] = { + .name = "AES-128-CBC-ESSIV", .cipher_str = "essiv(cbc(aes),sha256)", .keysize = 16, .ivsize = 16, }, [BLK_ENCRYPTION_MODE_ADIANTUM] = { + .name = "Adiantum", .cipher_str = "adiantum(xchacha12,aes)", .keysize = 32, .ivsize = 32, diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index c11242ef88558..b5f8029fe155e 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -877,6 +877,10 @@ int blk_register_queue(struct gendisk *disk) goto put_dev; } + ret = blk_crypto_sysfs_register(q); + if (ret) + goto put_dev; + blk_queue_flag_set(QUEUE_FLAG_REGISTERED, q); wbt_enable_default(q); blk_throtl_register_queue(q); @@ -908,6 +912,7 @@ int blk_register_queue(struct gendisk *disk) return ret; put_dev: + elv_unregister_queue(q); disk_unregister_independent_access_ranges(disk); mutex_unlock(&q->sysfs_lock); mutex_unlock(&q->sysfs_dir_lock); @@ -952,6 +957,7 @@ void blk_unregister_queue(struct gendisk *disk) */ if (queue_is_mq(q)) blk_mq_unregister_dev(disk_to_dev(disk), q); + blk_crypto_sysfs_unregister(q); blk_trace_remove_sysfs(disk_to_dev(disk)); mutex_lock(&q->sysfs_lock); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index c80cfaefc0a8f..c9461fb185d1f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -262,6 +262,7 @@ struct request_queue { #ifdef CONFIG_BLK_INLINE_ENCRYPTION struct blk_crypto_profile *crypto_profile; + struct kobject *crypto_kobject; #endif unsigned int rq_timeout;