| Message ID | 20220217132956.484818-25-damien.lemoal@opensource.wdc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | libsas and pm8001 fixes | expand |
On Thu, Feb 17, 2022 at 2:30 PM Damien Le Moal <damien.lemoal@opensource.wdc.com> wrote: > > To detect if a command is NCQ, there is no need to test all possible NCQ > command codes. Instead, use ata_is_ncq() to test the command protocol. > > Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> > --- > drivers/scsi/libsas/sas_ata.c | 9 ++------- > 1 file changed, 2 insertions(+), 7 deletions(-) > > diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c > index 50f779088b6e..fcfc8fd4b14f 100644 > --- a/drivers/scsi/libsas/sas_ata.c > +++ b/drivers/scsi/libsas/sas_ata.c > @@ -181,14 +181,9 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) > task->task_proto = SAS_PROTOCOL_STP; > task->task_done = sas_ata_task_done; > > - if (qc->tf.command == ATA_CMD_FPDMA_WRITE || > - qc->tf.command == ATA_CMD_FPDMA_READ || > - qc->tf.command == ATA_CMD_FPDMA_RECV || > - qc->tf.command == ATA_CMD_FPDMA_SEND || > - qc->tf.command == ATA_CMD_NCQ_NON_DATA) { > - /* Need to zero out the tag libata assigned us */ > + /* For NCQ commands, zero out the tag libata assigned us */ > + if (ata_is_ncq(qc->tf.protocol)) > qc->tf.nsect = 0; > - } > > ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); > task->uldd_task = qc; > -- > 2.34.1 >
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 50f779088b6e..fcfc8fd4b14f 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -181,14 +181,9 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) task->task_proto = SAS_PROTOCOL_STP; task->task_done = sas_ata_task_done; - if (qc->tf.command == ATA_CMD_FPDMA_WRITE || - qc->tf.command == ATA_CMD_FPDMA_READ || - qc->tf.command == ATA_CMD_FPDMA_RECV || - qc->tf.command == ATA_CMD_FPDMA_SEND || - qc->tf.command == ATA_CMD_NCQ_NON_DATA) { - /* Need to zero out the tag libata assigned us */ + /* For NCQ commands, zero out the tag libata assigned us */ + if (ata_is_ncq(qc->tf.protocol)) qc->tf.nsect = 0; - } ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); task->uldd_task = qc;
To detect if a command is NCQ, there is no need to test all possible NCQ command codes. Instead, use ata_is_ncq() to test the command protocol. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> --- drivers/scsi/libsas/sas_ata.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)