@@ -2415,7 +2415,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
len = sizeof(struct pio_setup_fis);
pm8001_dbg(pm8001_ha, IO,
"PIO read len = %d\n", len);
- } else if (t->ata_task.use_ncq) {
+ } else if (t->ata_task.use_ncq &&
+ t->data_dir != DMA_NONE) {
len = sizeof(struct set_dev_bits_fis);
pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
len);
@@ -2507,7 +2507,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
len = sizeof(struct pio_setup_fis);
pm8001_dbg(pm8001_ha, IO,
"PIO read len = %d\n", len);
- } else if (t->ata_task.use_ncq) {
+ } else if (t->ata_task.use_ncq &&
+ t->data_dir != DMA_NONE) {
len = sizeof(struct set_dev_bits_fis);
pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
len);
NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a register-device-to-host-FIS response is expected for it. However, for an IO_SUCCESS case, mpi_sata_completion() expects a set-device-bits-FIS for any ata task with an use_ncq field true, which includes NCQ NON DATA commands. Fix this to correctly treat NCQ NON DATA commands as non-data by also testing for the DMA_NONE DMA direction. Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> --- drivers/scsi/pm8001/pm8001_hwi.c | 3 ++- drivers/scsi/pm8001/pm80xx_hwi.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)