diff mbox series

[v3,02/20] phy: qcom-qmp-ufs: Rename MSM8996 PHY definitions

Message ID 20221123074826.95369-3-manivannan.sadhasivam@linaro.org (mailing list archive)
State Superseded
Headers show
Series ufs: qcom: Add HS-G4 support | expand

Commit Message

Manivannan Sadhasivam Nov. 23, 2022, 7:48 a.m. UTC 
Only MSM8996 is using "_ufs_" naming convention for PHY definitions instead
of "_ufsphy_" as like other SoCs. So to maintain the uniformity, let's
rename all of the definitions to use "_ufsphy_".

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 047f06c3313a..443f2714a8f1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -107,7 +107,7 @@  static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_SW_RESET]			= QPHY_V4_PCS_UFS_SW_RESET,
 };
 
-static const struct qmp_phy_init_tbl msm8996_ufs_serdes[] = {
+static const struct qmp_phy_init_tbl msm8996_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
 	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
@@ -156,12 +156,12 @@  static const struct qmp_phy_init_tbl msm8996_ufs_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
 };
 
-static const struct qmp_phy_init_tbl msm8996_ufs_tx[] = {
+static const struct qmp_phy_init_tbl msm8996_ufsphy_tx[] = {
 	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
 	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
 };
 
-static const struct qmp_phy_init_tbl msm8996_ufs_rx[] = {
+static const struct qmp_phy_init_tbl msm8996_ufsphy_rx[] = {
 	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
 	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
 	QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
@@ -657,15 +657,15 @@  static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
 };
 
-static const struct qmp_phy_cfg msm8996_ufs_cfg = {
+static const struct qmp_phy_cfg msm8996_ufsphy_cfg = {
 	.lanes			= 1,
 
-	.serdes_tbl		= msm8996_ufs_serdes,
-	.serdes_tbl_num		= ARRAY_SIZE(msm8996_ufs_serdes),
-	.tx_tbl			= msm8996_ufs_tx,
-	.tx_tbl_num		= ARRAY_SIZE(msm8996_ufs_tx),
-	.rx_tbl			= msm8996_ufs_rx,
-	.rx_tbl_num		= ARRAY_SIZE(msm8996_ufs_rx),
+	.serdes_tbl		= msm8996_ufsphy_serdes,
+	.serdes_tbl_num		= ARRAY_SIZE(msm8996_ufsphy_serdes),
+	.tx_tbl			= msm8996_ufsphy_tx,
+	.tx_tbl_num		= ARRAY_SIZE(msm8996_ufsphy_tx),
+	.rx_tbl			= msm8996_ufsphy_rx,
+	.rx_tbl_num		= ARRAY_SIZE(msm8996_ufsphy_rx),
 
 	.clk_list		= msm8996_ufs_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(msm8996_ufs_phy_clk_l),
@@ -1146,7 +1146,7 @@  static int qmp_ufs_create(struct device *dev, struct device_node *np, int id,
 static const struct of_device_id qmp_ufs_of_match_table[] = {
 	{
 		.compatible = "qcom,msm8996-qmp-ufs-phy",
-		.data = &msm8996_ufs_cfg,
+		.data = &msm8996_ufsphy_cfg,
 	}, {
 		.compatible = "qcom,msm8998-qmp-ufs-phy",
 		.data = &sdm845_ufsphy_cfg,