Message ID | 20230214120253.1098426-3-abel.vesa@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add dedicated Qcom ICE driver | expand |
On 14.02.2023 13:02, Abel Vesa wrote: > Drop all values related to the ICE from the UFS HC node and add a > dedicated ICE node. Also enable it in HDK board dts. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 4 ++++ > arch/arm64/boot/dts/qcom/sm8450.dtsi | 24 +++++++++++++++--------- > 2 files changed, 19 insertions(+), 9 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts > index feef3837e4cd..de631deef1e8 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts > +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts > @@ -461,6 +461,10 @@ lt9611_out: endpoint { > }; > }; > > +&ice { > + status = "okay"; > +}; > + > &mdss { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index 1a744a33bcf4..34d569f6c239 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -3989,9 +3989,8 @@ system-cache-controller@19200000 { > ufs_mem_hc: ufshc@1d84000 { > compatible = "qcom,sm8450-ufshc", "qcom,ufshc", > "jedec,ufs-2.0"; > - reg = <0 0x01d84000 0 0x3000>, > - <0 0x01d88000 0 0x8000>; > - reg-names = "std", "ice"; > + reg = <0 0x01d84000 0 0x3000>; > + reg-names = "std"; > interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; > phys = <&ufs_mem_phy_lanes>; > phy-names = "ufsphy"; > @@ -4015,8 +4014,7 @@ ufs_mem_hc: ufshc@1d84000 { > "ref_clk", > "tx_lane0_sync_clk", > "rx_lane0_sync_clk", > - "rx_lane1_sync_clk", > - "ice_core_clk"; > + "rx_lane1_sync_clk"; > clocks = > <&gcc GCC_UFS_PHY_AXI_CLK>, > <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, > @@ -4025,8 +4023,7 @@ ufs_mem_hc: ufshc@1d84000 { > <&rpmhcc RPMH_CXO_CLK>, > <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, > <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, > - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, > - <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; > + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; > freq-table-hz = > <75000000 300000000>, > <0 0>, > @@ -4035,8 +4032,17 @@ ufs_mem_hc: ufshc@1d84000 { > <75000000 300000000>, > <0 0>, > <0 0>, > - <0 0>, > - <75000000 300000000>; > + <0 0>; > + qcom,ice = <&ice>; > + > + status = "disabled"; > + }; > + > + ice: inline-crypto-engine { > + compatible = "qcom,inline-crypto-engine"; > + reg = <0 0x01d88000 0 0x8000>; > + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; > + > status = "disabled"; Any reason for this guy to be disabled? Konrad > }; >
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index feef3837e4cd..de631deef1e8 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -461,6 +461,10 @@ lt9611_out: endpoint { }; }; +&ice { + status = "okay"; +}; + &mdss { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 1a744a33bcf4..34d569f6c239 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -3989,9 +3989,8 @@ system-cache-controller@19200000 { ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8450-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x3000>, - <0 0x01d88000 0 0x8000>; - reg-names = "std", "ice"; + reg = <0 0x01d84000 0 0x3000>; + reg-names = "std"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -4015,8 +4014,7 @@ ufs_mem_hc: ufshc@1d84000 { "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk", - "rx_lane1_sync_clk", - "ice_core_clk"; + "rx_lane1_sync_clk"; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, @@ -4025,8 +4023,7 @@ ufs_mem_hc: ufshc@1d84000 { <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, - <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; freq-table-hz = <75000000 300000000>, <0 0>, @@ -4035,8 +4032,17 @@ ufs_mem_hc: ufshc@1d84000 { <75000000 300000000>, <0 0>, <0 0>, - <0 0>, - <75000000 300000000>; + <0 0>; + qcom,ice = <&ice>; + + status = "disabled"; + }; + + ice: inline-crypto-engine { + compatible = "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + status = "disabled"; };
Drop all values related to the ICE from the UFS HC node and add a dedicated ICE node. Also enable it in HDK board dts. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 4 ++++ arch/arm64/boot/dts/qcom/sm8450.dtsi | 24 +++++++++++++++--------- 2 files changed, 19 insertions(+), 9 deletions(-)