@@ -872,6 +872,7 @@ enum lpfc_irq_chann_mode {
enum lpfc_hba_bit_flags {
FABRIC_COMANDS_BLOCKED,
HBA_PCI_ERR,
+ MBX_TMO_ERR,
};
struct lpfc_hba {
@@ -9603,11 +9603,13 @@ void
lpfc_els_flush_cmd(struct lpfc_vport *vport)
{
LIST_HEAD(abort_list);
+ LIST_HEAD(cancel_list);
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli_ring *pring;
struct lpfc_iocbq *tmp_iocb, *piocb;
u32 ulp_command;
unsigned long iflags = 0;
+ bool mbx_tmo_err;
lpfc_fabric_abort_vport(vport);
@@ -9629,15 +9631,16 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
if (phba->sli_rev == LPFC_SLI_REV4)
spin_lock(&pring->ring_lock);
+ mbx_tmo_err = test_bit(MBX_TMO_ERR, &phba->bit_flags);
/* First we need to issue aborts to outstanding cmds on txcmpl */
list_for_each_entry_safe(piocb, tmp_iocb, &pring->txcmplq, list) {
- if (piocb->cmd_flag & LPFC_IO_LIBDFC)
+ if (piocb->cmd_flag & LPFC_IO_LIBDFC && !mbx_tmo_err)
continue;
if (piocb->vport != vport)
continue;
- if (piocb->cmd_flag & LPFC_DRIVER_ABORTED)
+ if (piocb->cmd_flag & LPFC_DRIVER_ABORTED && !mbx_tmo_err)
continue;
/* On the ELS ring we can have ELS_REQUESTs or
@@ -9656,8 +9659,8 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
*/
if (phba->link_state == LPFC_LINK_DOWN)
piocb->cmd_cmpl = lpfc_cmpl_els_link_down;
- }
- if (ulp_command == CMD_GEN_REQUEST64_CR)
+ } else if (ulp_command == CMD_GEN_REQUEST64_CR ||
+ mbx_tmo_err)
list_add_tail(&piocb->dlist, &abort_list);
}
@@ -9669,11 +9672,19 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
list_for_each_entry_safe(piocb, tmp_iocb, &abort_list, dlist) {
spin_lock_irqsave(&phba->hbalock, iflags);
list_del_init(&piocb->dlist);
- lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL);
+ if (mbx_tmo_err)
+ list_move_tail(&piocb->list, &cancel_list);
+ else
+ lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL);
+
spin_unlock_irqrestore(&phba->hbalock, iflags);
}
- /* Make sure HBA is alive */
- lpfc_issue_hb_tmo(phba);
+ if (!list_empty(&cancel_list))
+ lpfc_sli_cancel_iocbs(phba, &cancel_list, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
+ else
+ /* Make sure HBA is alive */
+ lpfc_issue_hb_tmo(phba);
if (!list_empty(&abort_list))
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
@@ -7550,6 +7550,8 @@ lpfc_disable_pci_dev(struct lpfc_hba *phba)
void
lpfc_reset_hba(struct lpfc_hba *phba)
{
+ int rc = 0;
+
/* If resets are disabled then set error state and return. */
if (!phba->cfg_enable_hba_reset) {
phba->link_state = LPFC_HBA_ERROR;
@@ -7560,13 +7562,25 @@ lpfc_reset_hba(struct lpfc_hba *phba)
if (phba->sli.sli_flag & LPFC_SLI_ACTIVE) {
lpfc_offline_prep(phba, LPFC_MBX_WAIT);
} else {
+ if (test_bit(MBX_TMO_ERR, &phba->bit_flags)) {
+ /* Perform a PCI function reset to start from clean */
+ rc = lpfc_pci_function_reset(phba);
+ lpfc_els_flush_all_cmd(phba);
+ }
lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
lpfc_sli_flush_io_rings(phba);
}
lpfc_offline(phba);
- lpfc_sli_brdrestart(phba);
- lpfc_online(phba);
- lpfc_unblock_mgmt_io(phba);
+ clear_bit(MBX_TMO_ERR, &phba->bit_flags);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "8888 PCI function reset failed rc %x\n",
+ rc);
+ } else {
+ lpfc_sli_brdrestart(phba);
+ lpfc_online(phba);
+ lpfc_unblock_mgmt_io(phba);
+ }
}
/**
@@ -3935,6 +3935,8 @@ void lpfc_poll_eratt(struct timer_list *t)
uint64_t sli_intr, cnt;
phba = from_timer(phba, t, eratt_poll);
+ if (!(phba->hba_flag & HBA_SETUP))
+ return;
/* Here we will also keep track of interrupts per sec of the hba */
sli_intr = phba->sli.slistat.sli_intr;
@@ -7693,7 +7695,9 @@ lpfc_sli4_repost_sgl_list(struct lpfc_hba *phba,
spin_unlock_irq(&phba->hbalock);
} else {
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
- "3161 Failure to post sgl to port.\n");
+ "3161 Failure to post sgl to port,status %x "
+ "blkcnt %d totalcnt %d postcnt %d\n",
+ status, block_cnt, total_cnt, post_cnt);
return -EIO;
}
@@ -8478,6 +8482,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
spin_unlock_irq(&phba->hbalock);
}
}
+ phba->hba_flag &= ~HBA_SETUP;
lpfc_sli4_dip(phba);
@@ -9282,6 +9287,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
* would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
* it to fail all outstanding SCSI IO.
*/
+ set_bit(MBX_TMO_ERR, &phba->bit_flags);
spin_lock_irq(&phba->pport->work_port_lock);
phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
spin_unlock_irq(&phba->pport->work_port_lock);
A mailbox timeout error usually indicates something has gone wrong, and a follow up reset of the HBA is a typical recovery mechanism. Introduce a MBX_TMO_ERR flag to detect such cases and have lpfc_els_flush_cmd abort ELS commands if the MBX_TMO_ERR flag condition was set. This ensures all of the registered SGL resources meant for ELS traffic are not leaked after an HBA reset. Signed-off-by: Justin Tee <justin.tee@broadcom.com> --- drivers/scsi/lpfc/lpfc.h | 1 + drivers/scsi/lpfc/lpfc_els.c | 25 ++++++++++++++++++------- drivers/scsi/lpfc/lpfc_init.c | 20 +++++++++++++++++--- drivers/scsi/lpfc/lpfc_sli.c | 8 +++++++- 4 files changed, 43 insertions(+), 11 deletions(-)