@@ -5172,11 +5172,27 @@ static const unsigned int ata_port_suspend_ehi = ATA_EHI_QUIET
static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg)
{
+ /*
+ * We are about to suspend the port, so we do not care about
+ * scsi_rescan_device() calls scheduled by previous resume operations.
+ * The next resume will schedule the rescan again. So cancel any rescan
+ * that is not done yet.
+ */
+ cancel_delayed_work_sync(&ap->scsi_rescan_task);
+
ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, false);
}
static void ata_port_suspend_async(struct ata_port *ap, pm_message_t mesg)
{
+ /*
+ * We are about to suspend the port, so we do not care about
+ * scsi_rescan_device() calls scheduled by previous resume operations.
+ * The next resume will schedule the rescan again. So cancel any rescan
+ * that is not done yet.
+ */
+ cancel_delayed_work_sync(&ap->scsi_rescan_task);
+
ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, true);
}
@@ -4750,7 +4750,7 @@ void ata_scsi_dev_rescan(struct work_struct *work)
struct ata_link *link;
struct ata_device *dev;
unsigned long flags;
- bool delay_rescan = false;
+ int ret = 0;
mutex_lock(&ap->scsi_scan_mutex);
spin_lock_irqsave(ap->lock, flags);
@@ -4759,37 +4759,37 @@ void ata_scsi_dev_rescan(struct work_struct *work)
ata_for_each_dev(dev, link, ENABLED) {
struct scsi_device *sdev = dev->sdev;
+ /*
+ * If the port was suspended before this was scheduled,
+ * bail out.
+ */
+ if (ap->pflags & ATA_PFLAG_SUSPENDED)
+ goto unlock;
+
if (!sdev)
continue;
if (scsi_device_get(sdev))
continue;
- /*
- * If the rescan work was scheduled because of a resume
- * event, the port is already fully resumed, but the
- * SCSI device may not yet be fully resumed. In such
- * case, executing scsi_rescan_device() may cause a
- * deadlock with the PM code on device_lock(). Prevent
- * this by giving up and retrying rescan after a short
- * delay.
- */
- delay_rescan = sdev->sdev_gendev.power.is_suspended;
- if (delay_rescan) {
- scsi_device_put(sdev);
- break;
- }
-
spin_unlock_irqrestore(ap->lock, flags);
- scsi_rescan_device(sdev);
+ ret = scsi_rescan_device(sdev);
scsi_device_put(sdev);
spin_lock_irqsave(ap->lock, flags);
+
+ if (ret)
+ goto unlock;
}
}
+unlock:
spin_unlock_irqrestore(ap->lock, flags);
mutex_unlock(&ap->scsi_scan_mutex);
- if (delay_rescan)
+ /*
+ * Reschedule with a delay if scsi_rescan_device() returned an error
+ * and the port has not been suspended.
+ */
+ if (ret && !(ap->pflags & ATA_PFLAG_SUSPENDED))
schedule_delayed_work(&ap->scsi_rescan_task,
msecs_to_jiffies(5));
}
@@ -1619,12 +1619,18 @@ int scsi_add_device(struct Scsi_Host *host, uint channel,
}
EXPORT_SYMBOL(scsi_add_device);
-void scsi_rescan_device(struct scsi_device *sdev)
+int scsi_rescan_device(struct scsi_device *sdev)
{
struct device *dev = &sdev->sdev_gendev;
+ int ret = 0;
device_lock(dev);
+ if (sdev->sdev_state != SDEV_RUNNING) {
+ ret = -ENXIO;
+ goto unlock;
+ }
+
scsi_attach_vpd(sdev);
scsi_cdl_check(sdev);
@@ -1638,7 +1644,11 @@ void scsi_rescan_device(struct scsi_device *sdev)
drv->rescan(dev);
module_put(dev->driver->owner);
}
+
+unlock:
device_unlock(dev);
+
+ return ret;
}
EXPORT_SYMBOL(scsi_rescan_device);
@@ -764,7 +764,7 @@ scsi_template_proc_dir(const struct scsi_host_template *sht);
#define scsi_template_proc_dir(sht) NULL
#endif
extern void scsi_scan_host(struct Scsi_Host *);
-extern void scsi_rescan_device(struct scsi_device *);
+extern int scsi_rescan_device(struct scsi_device *sdev);
extern void scsi_remove_host(struct Scsi_Host *);
extern struct Scsi_Host *scsi_host_get(struct Scsi_Host *);
extern int scsi_host_busy(struct Scsi_Host *shost);
Commit 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume") modified ata_scsi_dev_rescan() to check the scsi device "is_suspended" power field to ensure that the scsi device associated with an ATA device is fully resumed when scsi_rescan_device() is executed. However, this fix is problematic as: 1) it relies on a PM internal field that should not be used without PM device locking protection. 2) The check for is_suspended and the call to ata_scsi_dev_rescan() are not atomic and a suspend PM even may be triggered between them, casuing ata_scsi_dev_rescan() to be called on a suspended device, resulting in that function blocking while holding the scsi device lock, which would deadlock a following resume operation. These problems can trigger PM deadlocks on resume, especially with resume operations triggered quickly after or during suspend operations. E.g., a simple bash script like: for (( i=0; i<10; i++ )); do echo "+2 > /sys/class/rtc/rtc0/wakealarm echo mem > /sys/power/state done that triggers a resume 2 seconds after starting suspending a system can quickly lead to a PM deadlock preventing the system from correctly resuming. Fix this by replacing the check on is_suspended with a check on the scsi device state inside ata_scsi_dev_rescan(), while holding the scsi device lock, thus making the device rescan atomic with regard to PM operations. Additionnly, make sure that scheduled rescan tasks are first cancelled before suspending an ata port. Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> --- drivers/ata/libata-core.c | 16 ++++++++++++++++ drivers/ata/libata-scsi.c | 36 ++++++++++++++++++------------------ drivers/scsi/scsi_scan.c | 12 +++++++++++- include/scsi/scsi_host.h | 2 +- 4 files changed, 46 insertions(+), 20 deletions(-)