| Message ID | 20231205-sc7280-ufs-v6-2-ad6ca7796de7@fairphone.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | Add UFS host controller and Phy nodes for sc7280 | expand |
On Tue, Dec 05, 2023 at 03:38:55PM +0100, Luca Weiss wrote: > From: Nitin Rawat <quic_nitirawa@quicinc.com> > > Add UFS host controller and PHY nodes for sc7280 soc. > > Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # QCM6490 FP5 > [luca: various cleanups and additions as written in the cover letter] > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> - Mani > --- > arch/arm64/boot/dts/qcom/sc7280.dtsi | 74 +++++++++++++++++++++++++++++++++++- > 1 file changed, 73 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 04bf85b0399a..dcb6c2004f87 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -15,6 +15,7 @@ > #include <dt-bindings/dma/qcom-gpi.h> > #include <dt-bindings/firmware/qcom,scm.h> > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interconnect/qcom,icc.h> > #include <dt-bindings/interconnect/qcom,osm-l3.h> > #include <dt-bindings/interconnect/qcom,sc7280.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > @@ -906,7 +907,7 @@ gcc: clock-controller@100000 { > clocks = <&rpmhcc RPMH_CXO_CLK>, > <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, > <0>, <&pcie1_phy>, > - <0>, <0>, <0>, > + <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, > <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; > clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", > "pcie_0_pipe_clk", "pcie_1_pipe_clk", > @@ -2238,6 +2239,77 @@ pcie1_phy: phy@1c0e000 { > status = "disabled"; > }; > > + ufs_mem_hc: ufs@1d84000 { > + compatible = "qcom,sc7280-ufshc", "qcom,ufshc", > + "jedec,ufs-2.0"; > + reg = <0x0 0x01d84000 0x0 0x3000>; > + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&ufs_mem_phy>; > + phy-names = "ufsphy"; > + lanes-per-direction = <2>; > + #reset-cells = <1>; > + resets = <&gcc GCC_UFS_PHY_BCR>; > + reset-names = "rst"; > + > + power-domains = <&gcc GCC_UFS_PHY_GDSC>; > + required-opps = <&rpmhpd_opp_nom>; > + > + iommus = <&apps_smmu 0x80 0x0>; > + dma-coherent; > + > + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "ufs-ddr", "cpu-ufs"; > + > + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, > + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, > + <&gcc GCC_UFS_PHY_AHB_CLK>, > + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, > + <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; > + clock-names = "core_clk", > + "bus_aggr_clk", > + "iface_clk", > + "core_clk_unipro", > + "ref_clk", > + "tx_lane0_sync_clk", > + "rx_lane0_sync_clk", > + "rx_lane1_sync_clk"; > + freq-table-hz = > + <75000000 300000000>, > + <0 0>, > + <0 0>, > + <75000000 300000000>, > + <0 0>, > + <0 0>, > + <0 0>, > + <0 0>; > + status = "disabled"; > + }; > + > + ufs_mem_phy: phy@1d87000 { > + compatible = "qcom,sc7280-qmp-ufs-phy"; > + reg = <0x0 0x01d87000 0x0 0xe00>; > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, > + <&gcc GCC_UFS_1_CLKREF_EN>; > + clock-names = "ref", "ref_aux", "qref"; > + > + power-domains = <&rpmhpd SC7280_MX>; > + > + resets = <&ufs_mem_hc 0>; > + reset-names = "ufsphy"; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + status = "disabled"; > + }; > + > ipa: ipa@1e40000 { > compatible = "qcom,sc7280-ipa"; > > > -- > 2.43.0 >
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 04bf85b0399a..dcb6c2004f87 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc7280.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -906,7 +907,7 @@ gcc: clock-controller@100000 { clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, <0>, <&pcie1_phy>, - <0>, <0>, <0>, + <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk", @@ -2238,6 +2239,77 @@ pcie1_phy: phy@1c0e000 { status = "disabled"; }; + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sc7280-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x80 0x0>; + dma-coherent; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc7280-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe00>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_1_CLKREF_EN>; + clock-names = "ref", "ref_aux", "qref"; + + power-domains = <&rpmhpd SC7280_MX>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + ipa: ipa@1e40000 { compatible = "qcom,sc7280-ipa";