new file mode 100644
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2016-2024 Broadcom Inc. All rights reserved.
+ */
+#ifndef MPI30_TOOL_H
+#define MPI30_TOOL_H 1
+
+#define MPI3_DIAG_BUFFER_TYPE_TRACE (0x01)
+#define MPI3_DIAG_BUFFER_TYPE_FW (0x02)
+#define MPI3_DIAG_BUFFER_ACTION_RELEASE (0x01)
+
+struct mpi3_diag_buffer_post_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ u8 type;
+ u8 reserved0d;
+ __le16 reserved0e;
+ __le64 address;
+ __le32 length;
+ __le32 reserved1c;
+};
+
+struct mpi3_diag_buffer_manage_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ u8 type;
+ u8 action;
+ __le16 reserved0e;
+};
+
+
+#endif
@@ -47,6 +47,7 @@
#include "mpi/mpi30_ioc.h"
#include "mpi/mpi30_sas.h"
#include "mpi/mpi30_pci.h"
+#include "mpi/mpi30_tool.h"
#include "mpi3mr_debug.h"
/* Global list and lock for storing multiple adapters managed by the driver */
@@ -187,6 +188,13 @@ extern atomic64_t event_counter;
#define MPI3MR_HARD_SECURE_DEVICE 0x08
#define MPI3MR_TAMPERED_DEVICE 0x0C
+#define MPI3MR_DEFAULT_HDB_MAX_SZ (4 * 1024 * 1024)
+#define MPI3MR_DEFAULT_HDB_DEC_SZ (1 * 1024 * 1024)
+#define MPI3MR_DEFAULT_HDB_MIN_SZ (2 * 1024 * 1024)
+#define MPI3MR_MAX_NUM_HDB 2
+
+#define MPI3MR_HDB_TRIGGER_TYPE_GLOBAL 3
+
/* SGE Flag definition */
#define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \
(MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
@@ -210,6 +218,7 @@ extern atomic64_t event_counter;
#define MPI3MR_WRITE_SAME_MAX_LEN_256_BLKS 256
#define MPI3MR_WRITE_SAME_MAX_LEN_2048_BLKS 2048
+
/**
* struct mpi3mr_nvme_pt_sge - Structure to store SGEs for NVMe
* Encapsulated commands.
@@ -289,6 +298,8 @@ enum mpi3mr_reset_reason {
MPI3MR_RESET_FROM_PELABORT_TIMEOUT = 22,
MPI3MR_RESET_FROM_SYSFS = 23,
MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24,
+ MPI3MR_RESET_FROM_DIAG_BUFFER_POST_TIMEOUT = 25,
+ MPI3MR_RESET_FROM_DIAG_BUFFER_RELEASE_TIMEOUT = 26,
MPI3MR_RESET_FROM_FIRMWARE = 27,
MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT = 29,
MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT = 30,
@@ -327,6 +338,9 @@ struct mpi3mr_ioc_facts {
u32 ioc_capabilities;
struct mpi3mr_compimg_ver fw_ver;
u32 mpi_version;
+ u32 diag_trace_sz;
+ u32 diag_fw_sz;
+ u32 diag_drvr_sz;
u16 max_reqs;
u16 product_id;
u16 op_req_sz;
@@ -852,6 +866,41 @@ struct mpi3mr_drv_cmd {
struct mpi3mr_drv_cmd *drv_cmd);
};
+/**
+ * union mpi3mr_trigger_data - Trigger data information
+ * @fault: Fault code
+ * @global: Global trigger data
+ * @element: element trigger data
+ */
+union mpi3mr_trigger_data {
+ u16 fault;
+ u64 global;
+ union mpi3_driver2_trigger_element element;
+};
+
+/**
+ * struct diag_buffer_desc - memory descriptor structure to
+ * store virtual, dma addresses, size, buffer status for host
+ * diagnostic buffers.
+ *
+ * @type: Buffer type
+ * @trigger_data: Trigger data
+ * @trigger_type: Trigger type
+ * @status: Buffer status
+ * @size: Buffer size
+ * @addr: Virtual address
+ * @dma_addr: Buffer DMA address
+ */
+struct diag_buffer_desc {
+ u8 type;
+ union mpi3mr_trigger_data trigger_data;
+ u8 trigger_type;
+ u8 status;
+ u32 size;
+ void *addr;
+ dma_addr_t dma_addr;
+};
+
/**
* struct dma_memory_desc - memory descriptor structure to store
* virtual address, dma address and size for any generic dma
@@ -1054,6 +1103,11 @@ struct scmd_priv {
* @sas_node_lock: Lock to protect SAS node list
* @hba_port_table_list: List of HBA Ports
* @enclosure_list: List of Enclosure objects
+ * @diag_buffers: Host diagnostic buffers
+ * @driver_pg2: Driver page 2 pointer
+ * @reply_trigger_present: Reply trigger present flag
+ * @event_trigger_present: Event trigger present flag
+ * @scsisense_trigger_present: Scsi sense trigger present flag
* @ioctl_dma_pool: DMA pool for IOCTL data buffers
* @ioctl_sge: DMA buffer descriptors for IOCTL data
* @ioctl_chain_sge: DMA buffer descriptor for IOCTL chain
@@ -1250,6 +1304,12 @@ struct mpi3mr_ioc {
struct dma_memory_desc ioctl_chain_sge;
struct dma_memory_desc ioctl_resp_sge;
bool ioctl_sges_allocated;
+ bool reply_trigger_present;
+ bool event_trigger_present;
+ bool scsisense_trigger_present;
+ struct diag_buffer_desc diag_buffers[MPI3MR_MAX_NUM_HDB];
+ struct mpi3_driver_page2 *driver_pg2;
+ spinlock_t trigger_lock;
};
/**
@@ -1407,6 +1467,8 @@ int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc,
struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz);
int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc,
struct mpi3_driver_page1 *driver_pg1, u16 pg_sz);
+int mpi3mr_cfg_get_driver_pg2(struct mpi3mr_ioc *mrioc,
+ struct mpi3_driver_page2 *driver_pg2, u16 pg_sz, u8 page_type);
u8 mpi3mr_is_expander_device(u16 device_info);
int mpi3mr_expander_add(struct mpi3mr_ioc *mrioc, u16 handle);
@@ -1440,4 +1502,16 @@ void mpi3mr_free_enclosure_list(struct mpi3mr_ioc *mrioc);
int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc);
void mpi3mr_expander_node_remove(struct mpi3mr_ioc *mrioc,
struct mpi3mr_sas_node *sas_expander);
+void mpi3mr_alloc_diag_bufs(struct mpi3mr_ioc *mrioc);
+int mpi3mr_post_diag_bufs(struct mpi3mr_ioc *mrioc);
+int mpi3mr_issue_diag_buf_release(struct mpi3mr_ioc *mrioc,
+ struct diag_buffer_desc *diag_buffer);
+void mpi3mr_release_diag_bufs(struct mpi3mr_ioc *mrioc, u8 skip_rel_action);
+void mpi3mr_set_trigger_data_in_hdb(struct diag_buffer_desc *hdb,
+ u8 type, union mpi3mr_trigger_data *trigger_data, bool force);
+int mpi3mr_refresh_trigger(struct mpi3mr_ioc *mrioc, u8 page_type);
+struct diag_buffer_desc *mpi3mr_diag_buffer_for_type(struct mpi3mr_ioc *mrioc,
+ u8 buf_type);
+int mpi3mr_issue_diag_buf_post(struct mpi3mr_ioc *mrioc,
+ struct diag_buffer_desc *diag_buffer);
#endif /*MPI3MR_H_INCLUDED*/
@@ -11,6 +11,486 @@
#include <linux/bsg-lib.h>
#include <uapi/scsi/scsi_bsg_mpi3mr.h>
+/**
+ * mpi3mr_alloc_trace_buffer: Allocate trace buffer
+ * @mrioc: Adapter instance reference
+ * @trace_size: Trace buffer size
+ *
+ * Allocate trace buffer
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_alloc_trace_buffer(struct mpi3mr_ioc *mrioc, u32 trace_size)
+{
+ struct diag_buffer_desc *diag_buffer = &mrioc->diag_buffers[0];
+
+ diag_buffer->addr = dma_alloc_coherent(&mrioc->pdev->dev,
+ trace_size, &diag_buffer->dma_addr, GFP_KERNEL);
+ if (diag_buffer->addr) {
+ dprint_init(mrioc, "trace diag buffer is allocated successfully\n");
+ return 0;
+ }
+ return -1;
+}
+
+/**
+ * mpi3mr_alloc_diag_bufs - Allocate memory for diag buffers
+ * @mrioc: Adapter instance reference
+ *
+ * This functions checks whether the driver defined buffer sizes
+ * are greater than IOCFacts provided controller local buffer
+ * sizes and if the driver defined sizes are more then the
+ * driver allocates the specific buffer by reading driver page1
+ *
+ * Return: Nothing.
+ */
+void mpi3mr_alloc_diag_bufs(struct mpi3mr_ioc *mrioc)
+{
+ struct diag_buffer_desc *diag_buffer;
+ struct mpi3_driver_page1 driver_pg1;
+ u32 trace_dec_size, trace_min_size, fw_dec_size, fw_min_size,
+ trace_size, fw_size;
+ u16 pg_sz = sizeof(driver_pg1);
+ int retval = 0;
+ bool retry = false;
+
+ if (mrioc->diag_buffers[0].addr || mrioc->diag_buffers[1].addr)
+ return;
+
+ retval = mpi3mr_cfg_get_driver_pg1(mrioc, &driver_pg1, pg_sz);
+ if (retval) {
+ ioc_warn(mrioc,
+ "%s: driver page 1 read failed, allocating trace\n"
+ "and firmware diag buffers of default size\n", __func__);
+ trace_size = fw_size = MPI3MR_DEFAULT_HDB_MAX_SZ;
+ trace_dec_size = fw_dec_size = MPI3MR_DEFAULT_HDB_DEC_SZ;
+ trace_min_size = fw_min_size = MPI3MR_DEFAULT_HDB_MIN_SZ;
+
+ } else {
+ trace_size = driver_pg1.host_diag_trace_max_size * 1024;
+ trace_dec_size = driver_pg1.host_diag_trace_decrement_size
+ * 1024;
+ trace_min_size = driver_pg1.host_diag_trace_min_size * 1024;
+ fw_size = driver_pg1.host_diag_fw_max_size * 1024;
+ fw_dec_size = driver_pg1.host_diag_fw_decrement_size * 1024;
+ fw_min_size = driver_pg1.host_diag_fw_min_size * 1024;
+ dprint_init(mrioc,
+ "%s:trace diag buffer sizes read from driver\n"
+ "page1: maximum size = %dKB, decrement size = %dKB\n"
+ ", minimum size = %dKB\n", __func__, driver_pg1.host_diag_trace_max_size,
+ driver_pg1.host_diag_trace_decrement_size,
+ driver_pg1.host_diag_trace_min_size);
+ dprint_init(mrioc,
+ "%s:firmware diag buffer sizes read from driver\n"
+ "page1: maximum size = %dKB, decrement size = %dKB\n"
+ ", minimum size = %dKB\n", __func__, driver_pg1.host_diag_fw_max_size,
+ driver_pg1.host_diag_fw_decrement_size,
+ driver_pg1.host_diag_fw_min_size);
+ if ((trace_size == 0) && (fw_size == 0))
+ return;
+ }
+
+
+retry_trace:
+ diag_buffer = &mrioc->diag_buffers[0];
+ diag_buffer->type = MPI3_DIAG_BUFFER_TYPE_TRACE;
+ diag_buffer->status = MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED;
+ if ((mrioc->facts.diag_trace_sz < trace_size) && (trace_size >=
+ trace_min_size)) {
+ if (!retry)
+ dprint_init(mrioc,
+ "trying to allocate trace diag buffer of size = %dKB\n",
+ trace_size / 1024);
+ if (mpi3mr_alloc_trace_buffer(mrioc, trace_size)) {
+ retry = true;
+ trace_size -= trace_dec_size;
+ dprint_init(mrioc, "trace diag buffer allocation failed\n"
+ "retrying smaller size %dKB\n", trace_size / 1024);
+ goto retry_trace;
+ } else
+ diag_buffer->size = trace_size;
+ }
+
+ retry = false;
+retry_fw:
+
+ diag_buffer = &mrioc->diag_buffers[1];
+
+ diag_buffer->type = MPI3_DIAG_BUFFER_TYPE_FW;
+ diag_buffer->status = MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED;
+ if ((mrioc->facts.diag_fw_sz < fw_size) && (fw_size >= fw_min_size)) {
+ diag_buffer->addr = dma_alloc_coherent(&mrioc->pdev->dev,
+ fw_size, &diag_buffer->dma_addr, GFP_KERNEL);
+ if (!retry)
+ dprint_init(mrioc,
+ "%s:trying to allocate firmware diag buffer of size = %dKB\n",
+ __func__, fw_size / 1024);
+ if (diag_buffer->addr) {
+ dprint_init(mrioc, "%s:firmware diag buffer allocated successfully\n",
+ __func__);
+ diag_buffer->size = fw_size;
+ } else {
+ retry = true;
+ fw_size -= fw_dec_size;
+ dprint_init(mrioc, "%s:trace diag buffer allocation failed,\n"
+ "retrying smaller size %dKB\n",
+ __func__, fw_size / 1024);
+ goto retry_fw;
+ }
+ }
+}
+
+/**
+ * mpi3mr_issue_diag_buf_post - Send diag buffer post req
+ * @mrioc: Adapter instance reference
+ * @diag_buffer: Diagnostic buffer descriptor
+ *
+ * Issue diagnostic buffer post MPI request through admin queue
+ * and wait for the completion of it or time out.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+int mpi3mr_issue_diag_buf_post(struct mpi3mr_ioc *mrioc,
+ struct diag_buffer_desc *diag_buffer)
+{
+ struct mpi3_diag_buffer_post_request diag_buf_post_req;
+ u8 prev_status;
+ int retval = 0;
+
+ memset(&diag_buf_post_req, 0, sizeof(diag_buf_post_req));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ dprint_bsg_err(mrioc, "%s: command is in use\n", __func__);
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ return -1;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ diag_buf_post_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ diag_buf_post_req.function = MPI3_FUNCTION_DIAG_BUFFER_POST;
+ diag_buf_post_req.type = diag_buffer->type;
+ diag_buf_post_req.address = le64_to_cpu(diag_buffer->dma_addr);
+ diag_buf_post_req.length = le32_to_cpu(diag_buffer->size);
+
+ dprint_bsg_info(mrioc, "%s: posting diag buffer type %d\n", __func__,
+ diag_buffer->type);
+ prev_status = diag_buffer->status;
+ diag_buffer->status = MPI3MR_HDB_BUFSTATUS_POSTED_UNPAUSED;
+ init_completion(&mrioc->init_cmds.done);
+ retval = mpi3mr_admin_request_post(mrioc, &diag_buf_post_req,
+ sizeof(diag_buf_post_req), 1);
+ if (retval) {
+ dprint_bsg_err(mrioc, "%s: admin request post failed\n",
+ __func__);
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ mrioc->init_cmds.is_waiting = 0;
+ dprint_bsg_err(mrioc, "%s: command timedout\n", __func__);
+ mpi3mr_check_rh_fault_ioc(mrioc,
+ MPI3MR_RESET_FROM_DIAG_BUFFER_POST_TIMEOUT);
+ retval = -1;
+ goto out_unlock;
+ }
+ if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ dprint_bsg_err(mrioc,
+ "%s: command failed, buffer_type (%d) ioc_status(0x%04x) log_info(0x%08x)\n",
+ __func__, diag_buffer->type,
+ (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->init_cmds.ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+ dprint_bsg_info(mrioc, "%s: diag buffer type %d posted successfully\n",
+ __func__, diag_buffer->type);
+
+out_unlock:
+ if (retval)
+ diag_buffer->status = prev_status;
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ return retval;
+}
+
+/**
+ * mpi3mr_post_diag_bufs - Post diag buffers to the controller
+ * @mrioc: Adapter instance reference
+ *
+ * This function calls helper function to post both trace and
+ * firmware buffers to the controller.
+ *
+ * Return: None
+ */
+int mpi3mr_post_diag_bufs(struct mpi3mr_ioc *mrioc)
+{
+ u8 i;
+ struct diag_buffer_desc *diag_buffer;
+
+ for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) {
+ diag_buffer = &mrioc->diag_buffers[i];
+ if (!(diag_buffer->addr))
+ continue;
+ if (mpi3mr_issue_diag_buf_post(mrioc, diag_buffer))
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * mpi3mr_issue_diag_buf_release - Send diag buffer release req
+ * @mrioc: Adapter instance reference
+ * @diag_buffer: Diagnostic buffer descriptor
+ *
+ * Issue diagnostic buffer manage MPI request with release
+ * action request through admin queue and wait for the
+ * completion of it or time out.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+int mpi3mr_issue_diag_buf_release(struct mpi3mr_ioc *mrioc,
+ struct diag_buffer_desc *diag_buffer)
+{
+ struct mpi3_diag_buffer_manage_request diag_buf_manage_req;
+ int retval = 0;
+
+ if ((diag_buffer->status != MPI3MR_HDB_BUFSTATUS_POSTED_UNPAUSED) &&
+ (diag_buffer->status != MPI3MR_HDB_BUFSTATUS_POSTED_PAUSED))
+ return retval;
+
+ memset(&diag_buf_manage_req, 0, sizeof(diag_buf_manage_req));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ dprint_reset(mrioc, "%s: command is in use\n", __func__);
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ return -1;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ diag_buf_manage_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ diag_buf_manage_req.function = MPI3_FUNCTION_DIAG_BUFFER_MANAGE;
+ diag_buf_manage_req.type = diag_buffer->type;
+ diag_buf_manage_req.action = MPI3_DIAG_BUFFER_ACTION_RELEASE;
+
+
+ dprint_reset(mrioc, "%s: releasing diag buffer type %d\n", __func__,
+ diag_buffer->type);
+ init_completion(&mrioc->init_cmds.done);
+ retval = mpi3mr_admin_request_post(mrioc, &diag_buf_manage_req,
+ sizeof(diag_buf_manage_req), 1);
+ if (retval) {
+ dprint_reset(mrioc, "%s: admin request post failed\n", __func__);
+ mpi3mr_set_trigger_data_in_hdb(diag_buffer,
+ MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN, NULL, 1);
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ mrioc->init_cmds.is_waiting = 0;
+ dprint_reset(mrioc, "%s: command timedout\n", __func__);
+ mpi3mr_check_rh_fault_ioc(mrioc,
+ MPI3MR_RESET_FROM_DIAG_BUFFER_RELEASE_TIMEOUT);
+ retval = -1;
+ goto out_unlock;
+ }
+ if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ dprint_reset(mrioc,
+ "%s: command failed, buffer_type (%d) ioc_status(0x%04x) log_info(0x%08x)\n",
+ __func__, diag_buffer->type,
+ (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->init_cmds.ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+ dprint_reset(mrioc, "%s: diag buffer type %d released successfully\n",
+ __func__, diag_buffer->type);
+
+out_unlock:
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ return retval;
+}
+
+/**
+ * mpi3mr_get_num_trigger - Gets number of HDB triggers
+ * @mrioc: Adapter instance reference
+ * @num_triggers: Number of triggers
+ * @page_action: Page action
+ *
+ * This function reads number of triggers by reading driver page
+ * 2
+ *
+ * Return: 0 on success and proper error codes on failure
+ */
+static int mpi3mr_get_num_trigger(struct mpi3mr_ioc *mrioc, u8 *num_triggers,
+ u8 page_action)
+{
+ struct mpi3_driver_page2 drvr_page2;
+ int retval = 0;
+
+ *num_triggers = 0;
+
+ retval = mpi3mr_cfg_get_driver_pg2(mrioc, &drvr_page2,
+ sizeof(struct mpi3_driver_page2), page_action);
+
+ if (retval) {
+ dprint_init(mrioc, "%s: driver page 2 read failed\n", __func__);
+ return retval;
+ }
+ *num_triggers = drvr_page2.num_triggers;
+ return retval;
+}
+
+/**
+ * mpi3mr_refresh_trigger - Handler for Refresh trigger BSG
+ * @mrioc: Adapter instance reference
+ * @page_action: Page action
+ *
+ * This function caches the driver page 2 in the driver's memory
+ * by reading driver page 2 from the controller for a given page
+ * type and updates the HDB trigger values
+ *
+ * Return: 0 on success and proper error codes on failure
+ */
+int mpi3mr_refresh_trigger(struct mpi3mr_ioc *mrioc, u8 page_action)
+{
+ u16 pg_sz = sizeof(struct mpi3_driver_page2);
+ struct mpi3_driver_page2 *drvr_page2 = NULL;
+ u8 trigger_type, num_triggers;
+ int retval;
+ int i = 0;
+ unsigned long flags;
+
+ retval = mpi3mr_get_num_trigger(mrioc, &num_triggers, page_action);
+
+ if (retval)
+ goto out;
+
+ pg_sz = offsetof(struct mpi3_driver_page2, trigger) +
+ (num_triggers * sizeof(union mpi3_driver2_trigger_element));
+ drvr_page2 = kzalloc(pg_sz, GFP_KERNEL);
+ if (!drvr_page2) {
+ retval = -ENOMEM;
+ goto out;
+ }
+
+ retval = mpi3mr_cfg_get_driver_pg2(mrioc, drvr_page2, pg_sz, page_action);
+ if (retval) {
+ dprint_init(mrioc, "%s: driver page 2 read failed\n", __func__);
+ kfree(drvr_page2);
+ goto out;
+ }
+ spin_lock_irqsave(&mrioc->trigger_lock, flags);
+ kfree(mrioc->driver_pg2);
+ mrioc->driver_pg2 = drvr_page2;
+ mrioc->reply_trigger_present = false;
+ mrioc->event_trigger_present = false;
+ mrioc->scsisense_trigger_present = false;
+
+ for (i = 0; (i < mrioc->driver_pg2->num_triggers); i++) {
+ trigger_type = mrioc->driver_pg2->trigger[i].event.type;
+ switch (trigger_type) {
+ case MPI3_DRIVER2_TRIGGER_TYPE_REPLY:
+ mrioc->reply_trigger_present = true;
+ break;
+ case MPI3_DRIVER2_TRIGGER_TYPE_EVENT:
+ mrioc->event_trigger_present = true;
+ break;
+ case MPI3_DRIVER2_TRIGGER_TYPE_SCSI_SENSE:
+ mrioc->scsisense_trigger_present = true;
+ break;
+ default:
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&mrioc->trigger_lock, flags);
+out:
+ return retval;
+}
+
+/**
+ * mpi3mr_release_diag_bufs - Release diag buffers
+ * @mrioc: Adapter instance reference
+ * @skip_rel_action: Skip release action and set buffer state
+ *
+ * This function calls helper function to release both trace and
+ * firmware buffers from the controller.
+ *
+ * Return: None
+ */
+void mpi3mr_release_diag_bufs(struct mpi3mr_ioc *mrioc, u8 skip_rel_action)
+{
+ u8 i;
+ struct diag_buffer_desc *diag_buffer;
+
+ for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) {
+ diag_buffer = &mrioc->diag_buffers[i];
+ if (!(diag_buffer->addr))
+ continue;
+ if (diag_buffer->status == MPI3MR_HDB_BUFSTATUS_RELEASED)
+ continue;
+ if (!skip_rel_action)
+ mpi3mr_issue_diag_buf_release(mrioc, diag_buffer);
+ diag_buffer->status = MPI3MR_HDB_BUFSTATUS_RELEASED;
+ atomic64_inc(&event_counter);
+ }
+}
+
+/**
+ * mpi3mr_set_trigger_data_in_hdb - Updates HDB trigger type and
+ * trigger data
+ *
+ * @hdb: HDB pointer
+ * @type: Trigger type
+ * @data: Trigger data
+ * @force: Trigger overwrite flag
+ * @trigger_data: pointer to trigger data information
+ *
+ * Updates trigger type and trigger data based on parameter
+ * passed to this function
+ *
+ * Return: Nothing
+ */
+void mpi3mr_set_trigger_data_in_hdb(struct diag_buffer_desc *hdb,
+ u8 type, union mpi3mr_trigger_data *trigger_data, bool force)
+{
+ if ((!force) && (hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN))
+ return;
+ hdb->trigger_type = type;
+ if (!trigger_data)
+ memset(&hdb->trigger_data, 0, sizeof(*trigger_data));
+ else
+ memcpy(&hdb->trigger_data, trigger_data, sizeof(*trigger_data));
+}
+
+/**
+ * mpi3mr_diag_buffer_for_type - returns buffer desc for type
+ * @mrioc: Adapter instance reference
+ * @buf_type: Diagnostic buffer type
+ *
+ * Identifies matching diag descriptor from mrioc for given diag
+ * buffer type.
+ *
+ * Return: diag buffer descriptor on success, NULL on failures.
+ */
+
+struct diag_buffer_desc *
+mpi3mr_diag_buffer_for_type(struct mpi3mr_ioc *mrioc, u8 buf_type)
+{
+ u8 i;
+
+ for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) {
+ if (mrioc->diag_buffers[i].type == buf_type)
+ return &mrioc->diag_buffers[i];
+ }
+ return NULL;
+}
+
/**
* mpi3mr_bsg_pel_abort - sends PEL abort request
* @mrioc: Adapter instance reference
@@ -3003,7 +3003,11 @@ static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc,
mrioc->facts.sge_mod_shift = facts_data->sge_modifier_shift;
mrioc->facts.shutdown_timeout =
le16_to_cpu(facts_data->shutdown_timeout);
-
+ mrioc->facts.diag_trace_sz =
+ le32_to_cpu(facts_data->diag_trace_size);
+ mrioc->facts.diag_fw_sz =
+ le32_to_cpu(facts_data->diag_fw_size);
+ mrioc->facts.diag_drvr_sz = le32_to_cpu(facts_data->diag_driver_size);
mrioc->facts.max_dev_per_tg =
facts_data->max_devices_per_throttle_group;
mrioc->facts.io_throttle_data_length =
@@ -3681,6 +3685,94 @@ static const struct {
{ MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED, "MultiPath" },
};
+/**
+ * mpi3mr_repost_diag_bufs - repost host diag buffers
+ * @mrioc: Adapter instance reference
+ *
+ * repost firmware and trace diag buffers based on global
+ * trigger flag from driver page 2
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static int mpi3mr_repost_diag_bufs(struct mpi3mr_ioc *mrioc)
+{
+ u64 global_trigger;
+ union mpi3mr_trigger_data prev_trigger_data;
+ struct diag_buffer_desc *trace_hdb = NULL;
+ struct diag_buffer_desc *fw_hdb = NULL;
+ int retval = 0;
+ bool trace_repost_needed = false;
+ bool fw_repost_needed = false;
+ u8 prev_trigger_type;
+
+ retval = mpi3mr_refresh_trigger(mrioc, MPI3_CONFIG_ACTION_READ_CURRENT);
+ if (retval)
+ return -1;
+
+ trace_hdb = mpi3mr_diag_buffer_for_type(mrioc,
+ MPI3_DIAG_BUFFER_TYPE_TRACE);
+
+ if (trace_hdb &&
+ trace_hdb->status != MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED &&
+ trace_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_GLOBAL &&
+ trace_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_ELEMENT)
+ trace_repost_needed = true;
+
+ fw_hdb = mpi3mr_diag_buffer_for_type(mrioc, MPI3_DIAG_BUFFER_TYPE_FW);
+
+ if (fw_hdb && fw_hdb->status != MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED &&
+ fw_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_GLOBAL &&
+ fw_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_ELEMENT)
+ fw_repost_needed = true;
+
+ if (trace_repost_needed || fw_repost_needed) {
+ global_trigger = le64_to_cpu(mrioc->driver_pg2->global_trigger);
+ if (global_trigger &
+ MPI3_DRIVER2_GLOBALTRIGGER_POST_DIAG_TRACE_DISABLED)
+ trace_repost_needed = false;
+ if (global_trigger &
+ MPI3_DRIVER2_GLOBALTRIGGER_POST_DIAG_FW_DISABLED)
+ fw_repost_needed = false;
+ }
+
+ if (trace_repost_needed) {
+ prev_trigger_type = trace_hdb->trigger_type;
+ memcpy(&prev_trigger_data, &trace_hdb->trigger_data,
+ sizeof(trace_hdb->trigger_data));
+ retval = mpi3mr_issue_diag_buf_post(mrioc, trace_hdb);
+ if (!retval) {
+ dprint_init(mrioc, "trace diag buffer reposted");
+ mpi3mr_set_trigger_data_in_hdb(trace_hdb,
+ MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN, NULL, 1);
+ } else {
+ trace_hdb->trigger_type = prev_trigger_type;
+ memcpy(&trace_hdb->trigger_data, &prev_trigger_data,
+ sizeof(prev_trigger_data));
+ ioc_err(mrioc, "trace diag buffer repost failed");
+ return -1;
+ }
+ }
+
+ if (fw_repost_needed) {
+ prev_trigger_type = fw_hdb->trigger_type;
+ memcpy(&prev_trigger_data, &fw_hdb->trigger_data,
+ sizeof(fw_hdb->trigger_data));
+ retval = mpi3mr_issue_diag_buf_post(mrioc, fw_hdb);
+ if (!retval) {
+ dprint_init(mrioc, "firmware diag buffer reposted");
+ mpi3mr_set_trigger_data_in_hdb(fw_hdb,
+ MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN, NULL, 1);
+ } else {
+ fw_hdb->trigger_type = prev_trigger_type;
+ memcpy(&fw_hdb->trigger_data, &prev_trigger_data,
+ sizeof(prev_trigger_data));
+ ioc_err(mrioc, "firmware diag buffer repost failed");
+ return -1;
+ }
+ }
+ return retval;
+}
+
/**
* mpi3mr_print_ioc_info - Display controller information
* @mrioc: Adapter instance reference
@@ -3989,9 +4081,18 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
}
}
+ dprint_init(mrioc, "allocating host diag buffers\n");
+ mpi3mr_alloc_diag_bufs(mrioc);
+
dprint_init(mrioc, "allocating ioctl dma buffers\n");
mpi3mr_alloc_ioctl_dma_memory(mrioc);
+ dprint_init(mrioc, "posting host diag buffers\n");
+ retval = mpi3mr_post_diag_bufs(mrioc);
+
+ if (retval)
+ ioc_warn(mrioc, "failed to post host diag buffers\n");
+
if (!mrioc->init_cmds.reply) {
retval = mpi3mr_alloc_reply_sense_bufs(mrioc);
if (retval) {
@@ -4144,6 +4245,17 @@ int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume)
mpi3mr_print_ioc_info(mrioc);
+ if (is_resume) {
+ dprint_reset(mrioc, "posting host diag buffers\n");
+ retval = mpi3mr_post_diag_bufs(mrioc);
+ if (retval)
+ ioc_warn(mrioc, "failed to post host diag buffers\n");
+ } else {
+ retval = mpi3mr_repost_diag_bufs(mrioc);
+ if (retval)
+ ioc_warn(mrioc, "failed to re post host diag buffers\n");
+ }
+
dprint_reset(mrioc, "sending ioc_init\n");
retval = mpi3mr_issue_iocinit(mrioc);
if (retval) {
@@ -4409,6 +4521,7 @@ void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
{
u16 i;
struct mpi3mr_intr_info *intr_info;
+ struct diag_buffer_desc *diag_buffer;
mpi3mr_free_enclosure_list(mrioc);
mpi3mr_free_ioctl_dma_memory(mrioc);
@@ -4543,6 +4656,19 @@ void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
mrioc->pel_seqnum_virt = NULL;
}
+ for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) {
+ diag_buffer = &mrioc->diag_buffers[i];
+ if (diag_buffer->addr) {
+ dma_free_coherent(&mrioc->pdev->dev,
+ diag_buffer->size, diag_buffer->addr,
+ diag_buffer->dma_addr);
+ diag_buffer->addr = NULL;
+ diag_buffer->size = 0;
+ diag_buffer->type = 0;
+ diag_buffer->status = 0;
+ }
+ }
+
kfree(mrioc->throttle_groups);
mrioc->throttle_groups = NULL;
@@ -5016,6 +5142,9 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
if ((!snapdump) && (reset_reason != MPI3MR_RESET_FROM_FAULT_WATCH) &&
(reset_reason != MPI3MR_RESET_FROM_FIRMWARE) &&
(reset_reason != MPI3MR_RESET_FROM_CIACTIV_FAULT)) {
+ dprint_reset(mrioc,
+ "soft_reset_handler: releasing host diagnostic buffers\n");
+ mpi3mr_release_diag_bufs(mrioc, 0);
for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
mrioc->event_masks[i] = -1;
@@ -5075,6 +5204,7 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
mrioc->prepare_for_reset_timeout_counter = 0;
}
mpi3mr_memset_buffers(mrioc);
+ mpi3mr_release_diag_bufs(mrioc, 1);
retval = mpi3mr_reinit_ioc(mrioc, 0);
if (retval) {
pr_err(IOCNAME "reinit after soft reset failed: reason %d\n",
@@ -5954,3 +6084,64 @@ int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc,
out_failed:
return -1;
}
+
+/**
+ * mpi3mr_cfg_get_driver_pg2 - Read current driver page2
+ * @mrioc: Adapter instance reference
+ * @driver_pg2: Pointer to return driver page 2
+ * @pg_sz: Size of the memory allocated to the page pointer
+ * @page_action: Page action
+ *
+ * This is handler for config page read for the driver page2.
+ * This routine checks ioc_status to decide whether the page
+ * read is success or not.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+int mpi3mr_cfg_get_driver_pg2(struct mpi3mr_ioc *mrioc,
+ struct mpi3_driver_page2 *driver_pg2, u16 pg_sz, u8 page_action)
+{
+ struct mpi3_config_page_header cfg_hdr;
+ struct mpi3_config_request cfg_req;
+ u16 ioc_status = 0;
+
+ memset(driver_pg2, 0, pg_sz);
+ memset(&cfg_hdr, 0, sizeof(cfg_hdr));
+ memset(&cfg_req, 0, sizeof(cfg_req));
+
+ cfg_req.function = MPI3_FUNCTION_CONFIG;
+ cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
+ cfg_req.page_type = MPI3_CONFIG_PAGETYPE_DRIVER;
+ cfg_req.page_number = 2;
+ cfg_req.page_address = 0;
+ cfg_req.page_version = MPI3_DRIVER2_PAGEVERSION;
+
+ if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
+ MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
+ ioc_err(mrioc, "driver page2 header read failed\n");
+ goto out_failed;
+ }
+ if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc, "driver page2 header read failed with\n"
+ "ioc_status(0x%04x)\n",
+ ioc_status);
+ goto out_failed;
+ }
+ cfg_req.action = page_action;
+
+ if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
+ MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, driver_pg2, pg_sz)) {
+ ioc_err(mrioc, "driver page2 read failed\n");
+ goto out_failed;
+ }
+ if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc, "driver page2 read failed with\n"
+ "ioc_status(0x%04x)\n",
+ ioc_status);
+ goto out_failed;
+ }
+ return 0;
+out_failed:
+ return -1;
+}
+