diff mbox series

[06/13] scsi: hisi_sas: Check usage count only when the runtime PM status is RPM_SUSPENDING

Message ID 20240926014332.3905399-7-liyihang9@huawei.com (mailing list archive)
State Superseded
Headers show
Series scsi: hisi_sas: Some fixes for hisi_sas | expand

Commit Message

Yihang Li Sept. 26, 2024, 1:43 a.m. UTC 
Users can suspend the machine with 'echo disk > /sys/power/state', but the
suspend will fail because the SAS controller cannot be suspended:

[root@localhost ~]# echo freeze > /sys/power/state
-bash: echo: write error: Device or resource busy
[15104.142955] PM: suspend entry (s2idle)
...
[15104.283465] hisi_sas_v3_hw 0000:32:04.0: entering suspend state
[15104.283480] hisi_sas_v3_hw 0000:30:04.0: entering suspend state
[15104.283500] hisi_sas_v3_hw 0000:32:04.0: PM suspend: host status cannot be suspended
[15104.283508] hisi_sas_v3_hw 0000:30:04.0: PM suspend: host status cannot be suspended
[15104.283516] hisi_sas_v3_hw 0000:32:04.0: PM: pci_pm_suspend(): suspend_v3_hw+0x0/0x210 [hisi_sas_v3_hw] returns -16
[15104.283527] hisi_sas_v3_hw 0000:32:04.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1c0 returns -16
[15104.283524] hisi_sas_v3_hw 0000:30:04.0: PM: pci_pm_suspend(): suspend_v3_hw+0x0/0x210 [hisi_sas_v3_hw] returns -16
[15104.283533] hisi_sas_v3_hw 0000:32:04.0: PM: failed to suspend async: error -16
[15104.283536] hisi_sas_v3_hw 0000:30:04.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1c0 returns -16
[15104.283542] hisi_sas_v3_hw 0000:30:04.0: PM: failed to suspend async: error -16

The problem is that when the ->runtime_suspend() callback suspend_v3_hw()
is executing, the current runtime PM status is RPM_ACTIVE and the usage
count of the controller is not 0, so return immediately.

To fix it, Check the device usage count only when the runtime PM status is
RPM_SUSPENDING.

Signed-off-by: Yihang Li <liyihang9@huawei.com>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index d48777fc4bd9..9e65ad0e6ce0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -5048,7 +5048,8 @@  static int _suspend_v3_hw(struct device *device)
 	interrupt_disable_v3_hw(hisi_hba);
 
 #ifdef CONFIG_PM
-	if (atomic_read(&device->power.usage_count)) {
+	if ((device->power.runtime_status == RPM_SUSPENDING) &&
+	    atomic_read(&device->power.usage_count)) {
 		dev_err(dev, "PM suspend: host status cannot be suspended\n");
 		rc = -EBUSY;
 		goto err_out;