@@ -1133,7 +1133,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct queue_limits *lim,
}
/**
- * ata_scsi_slave_alloc - Early setup of SCSI device
+ * ata_scsi_sdev_prep - Early setup of SCSI device
* @sdev: SCSI device to examine
*
* This is called from scsi_alloc_sdev() when the scsi device
@@ -1143,7 +1143,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct queue_limits *lim,
* Defined by SCSI layer. We don't really care.
*/
-int ata_scsi_slave_alloc(struct scsi_device *sdev)
+int ata_scsi_sdev_prep(struct scsi_device *sdev)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct device_link *link;
@@ -1166,7 +1166,7 @@ int ata_scsi_slave_alloc(struct scsi_device *sdev)
return 0;
}
-EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc);
+EXPORT_SYMBOL_GPL(ata_scsi_sdev_prep);
/**
* ata_scsi_device_configure - Set SCSI device attributes
@@ -1195,7 +1195,7 @@ int ata_scsi_device_configure(struct scsi_device *sdev,
EXPORT_SYMBOL_GPL(ata_scsi_device_configure);
/**
- * ata_scsi_slave_destroy - SCSI device is about to be destroyed
+ * ata_scsi_sdev_destroy - SCSI device is about to be destroyed
* @sdev: SCSI device to be destroyed
*
* @sdev is about to be destroyed for hot/warm unplugging. If
@@ -1208,7 +1208,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_device_configure);
* LOCKING:
* Defined by SCSI layer. We don't really care.
*/
-void ata_scsi_slave_destroy(struct scsi_device *sdev)
+void ata_scsi_sdev_destroy(struct scsi_device *sdev)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
unsigned long flags;
@@ -1228,7 +1228,7 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev)
kfree(sdev->dma_drain_buf);
}
-EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
+EXPORT_SYMBOL_GPL(ata_scsi_sdev_destroy);
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
@@ -1490,7 +1490,7 @@ static int sbp2_scsi_queuecommand(struct Scsi_Host *shost,
return retval;
}
-static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
+static int sbp2_scsi_sdev_prep(struct scsi_device *sdev)
{
struct sbp2_logical_unit *lu = sdev->hostdata;
@@ -1590,7 +1590,7 @@ static const struct scsi_host_template scsi_driver_template = {
.name = "SBP-2 IEEE-1394",
.proc_name = "sbp2",
.queuecommand = sbp2_scsi_queuecommand,
- .slave_alloc = sbp2_scsi_slave_alloc,
+ .sdev_prep = sbp2_scsi_sdev_prep,
.device_configure = sbp2_scsi_device_configure,
.eh_abort_handler = sbp2_scsi_abort,
.this_id = -1,
@@ -96,7 +96,7 @@ static u8 mptfcTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
static u8 mptfcInternalCtx = MPT_MAX_PROTOCOL_DRIVERS;
static int mptfc_target_alloc(struct scsi_target *starget);
-static int mptfc_slave_alloc(struct scsi_device *sdev);
+static int mptfc_sdev_prep(struct scsi_device *sdev);
static int mptfc_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt);
static void mptfc_target_destroy(struct scsi_target *starget);
static void mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout);
@@ -113,10 +113,10 @@ static const struct scsi_host_template mptfc_driver_template = {
.info = mptscsih_info,
.queuecommand = mptfc_qcmd,
.target_alloc = mptfc_target_alloc,
- .slave_alloc = mptfc_slave_alloc,
+ .sdev_prep = mptfc_sdev_prep,
.slave_configure = mptscsih_slave_configure,
.target_destroy = mptfc_target_destroy,
- .slave_destroy = mptscsih_slave_destroy,
+ .sdev_destroy = mptscsih_sdev_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_timed_out = fc_eh_timed_out,
.eh_abort_handler = mptfc_abort,
@@ -503,7 +503,7 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
/*
* if already mapped, remap here. If not mapped,
* target_alloc will allocate vtarget and map,
- * slave_alloc will fill in vdevice from vtarget.
+ * sdev_prep will fill in vdevice from vtarget.
*/
if (ri->starget) {
vtarget = ri->starget->hostdata;
@@ -631,7 +631,7 @@ mptfc_dump_lun_info(MPT_ADAPTER *ioc, struct fc_rport *rport, struct scsi_device
* Init memory once per LUN.
*/
static int
-mptfc_slave_alloc(struct scsi_device *sdev)
+mptfc_sdev_prep(struct scsi_device *sdev)
{
MPT_SCSI_HOST *hd;
VirtTarget *vtarget;
@@ -651,7 +651,7 @@ mptfc_slave_alloc(struct scsi_device *sdev)
vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
if (!vdevice) {
- printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
+ printk(MYIOC_s_ERR_FMT "sdev_prep kmalloc(%zd) FAILED!\n",
ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
@@ -1867,7 +1867,7 @@ mptsas_target_destroy(struct scsi_target *starget)
static int
-mptsas_slave_alloc(struct scsi_device *sdev)
+mptsas_sdev_prep(struct scsi_device *sdev)
{
struct Scsi_Host *host = sdev->host;
MPT_SCSI_HOST *hd = shost_priv(host);
@@ -1880,7 +1880,7 @@ mptsas_slave_alloc(struct scsi_device *sdev)
vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
if (!vdevice) {
- printk(MYIOC_s_ERR_FMT "slave_alloc kzalloc(%zd) FAILED!\n",
+ printk(MYIOC_s_ERR_FMT "sdev_prep kzalloc(%zd) FAILED!\n",
ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
@@ -2005,10 +2005,10 @@ static const struct scsi_host_template mptsas_driver_template = {
.info = mptscsih_info,
.queuecommand = mptsas_qcmd,
.target_alloc = mptsas_target_alloc,
- .slave_alloc = mptsas_slave_alloc,
+ .sdev_prep = mptsas_sdev_prep,
.slave_configure = mptsas_slave_configure,
.target_destroy = mptsas_target_destroy,
- .slave_destroy = mptscsih_slave_destroy,
+ .sdev_destroy = mptscsih_sdev_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_timed_out = mptsas_eh_timed_out,
.eh_abort_handler = mptscsih_abort,
@@ -1071,7 +1071,7 @@ EXPORT_SYMBOL(mptscsih_flush_running_cmds);
*
* Returns: None.
*
- * Called from slave_destroy.
+ * Called from sdev_destroy.
*/
static void
mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
@@ -2331,7 +2331,7 @@ EXPORT_SYMBOL(mptscsih_raid_id_to_num);
* Called if no device present or device being unloaded
*/
void
-mptscsih_slave_destroy(struct scsi_device *sdev)
+mptscsih_sdev_destroy(struct scsi_device *sdev)
{
struct Scsi_Host *host = sdev->host;
MPT_SCSI_HOST *hd = shost_priv(host);
@@ -3302,7 +3302,7 @@ EXPORT_SYMBOL(mptscsih_resume);
EXPORT_SYMBOL(mptscsih_show_info);
EXPORT_SYMBOL(mptscsih_info);
EXPORT_SYMBOL(mptscsih_qcmd);
-EXPORT_SYMBOL(mptscsih_slave_destroy);
+EXPORT_SYMBOL(mptscsih_sdev_destroy);
EXPORT_SYMBOL(mptscsih_slave_configure);
EXPORT_SYMBOL(mptscsih_abort);
EXPORT_SYMBOL(mptscsih_dev_reset);
@@ -116,7 +116,7 @@ extern const char * mptscsih_info(struct Scsi_Host *SChost);
extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt);
extern int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel,
u8 id, u64 lun, int ctx2abort, ulong timeout);
-extern void mptscsih_slave_destroy(struct scsi_device *device);
+extern void mptscsih_sdev_destroy(struct scsi_device *device);
extern int mptscsih_slave_configure(struct scsi_device *device);
extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
extern int mptscsih_dev_reset(struct scsi_cmnd * SCpnt);
@@ -713,7 +713,7 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
mptspi_read_parameters(sdev->sdev_target);
}
-static int mptspi_slave_alloc(struct scsi_device *sdev)
+static int mptspi_sdev_prep(struct scsi_device *sdev)
{
MPT_SCSI_HOST *hd = shost_priv(sdev->host);
VirtTarget *vtarget;
@@ -727,7 +727,7 @@ static int mptspi_slave_alloc(struct scsi_device *sdev)
vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
if (!vdevice) {
- printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
+ printk(MYIOC_s_ERR_FMT "sdev_prep kmalloc(%zd) FAILED!\n",
ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
@@ -799,7 +799,7 @@ mptspi_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt)
return mptscsih_qcmd(SCpnt);
}
-static void mptspi_slave_destroy(struct scsi_device *sdev)
+static void mptspi_sdev_destroy(struct scsi_device *sdev)
{
struct scsi_target *starget = scsi_target(sdev);
VirtTarget *vtarget = starget->hostdata;
@@ -817,7 +817,7 @@ static void mptspi_slave_destroy(struct scsi_device *sdev)
mptspi_write_spi_device_pg1(starget, &pg1);
}
- mptscsih_slave_destroy(sdev);
+ mptscsih_sdev_destroy(sdev);
}
static const struct scsi_host_template mptspi_driver_template = {
@@ -828,10 +828,10 @@ static const struct scsi_host_template mptspi_driver_template = {
.info = mptscsih_info,
.queuecommand = mptspi_qcmd,
.target_alloc = mptspi_target_alloc,
- .slave_alloc = mptspi_slave_alloc,
+ .sdev_prep = mptspi_sdev_prep,
.slave_configure = mptspi_slave_configure,
.target_destroy = mptspi_target_destroy,
- .slave_destroy = mptspi_slave_destroy,
+ .sdev_destroy = mptspi_sdev_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
.eh_device_reset_handler = mptscsih_dev_reset,
@@ -37,11 +37,11 @@ static bool allow_lun_scan = true;
module_param(allow_lun_scan, bool, 0600);
MODULE_PARM_DESC(allow_lun_scan, "For NPIV, scan and attach all storage LUNs");
-static void zfcp_scsi_slave_destroy(struct scsi_device *sdev)
+static void zfcp_scsi_sdev_destroy(struct scsi_device *sdev)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
- /* if previous slave_alloc returned early, there is nothing to do */
+ /* if previous sdev_prep returned early, there is nothing to do */
if (!zfcp_sdev->port)
return;
@@ -110,7 +110,7 @@ int zfcp_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scpnt)
return ret;
}
-static int zfcp_scsi_slave_alloc(struct scsi_device *sdev)
+static int zfcp_scsi_sdev_prep(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
struct zfcp_adapter *adapter =
@@ -427,9 +427,9 @@ static const struct scsi_host_template zfcp_scsi_host_template = {
.eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler,
.eh_target_reset_handler = zfcp_scsi_eh_target_reset_handler,
.eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler,
- .slave_alloc = zfcp_scsi_slave_alloc,
+ .sdev_prep = zfcp_scsi_sdev_prep,
.slave_configure = zfcp_scsi_slave_configure,
- .slave_destroy = zfcp_scsi_slave_destroy,
+ .sdev_destroy = zfcp_scsi_sdev_destroy,
.change_queue_depth = scsi_change_queue_depth,
.host_reset = zfcp_scsi_sysfs_host_reset,
.proc_name = "zfcp",
@@ -284,7 +284,7 @@ static bool zfcp_sysfs_port_in_use(struct zfcp_port *const port)
goto unlock_host_lock;
}
- /* port is about to be removed, so no more unit_add or slave_alloc */
+ /* port is about to be removed, so no more unit_add or sdev_prep */
zfcp_sysfs_port_set_removing(port);
in_use = false;
@@ -170,7 +170,7 @@ int zfcp_unit_add(struct zfcp_port *port, u64 fcp_lun)
write_unlock_irq(&port->unit_list_lock);
/*
* lock order: shost->scan_mutex before zfcp_sysfs_port_units_mutex
- * due to zfcp_unit_scsi_scan() => zfcp_scsi_slave_alloc()
+ * due to zfcp_unit_scsi_scan() => zfcp_scsi_sdev_prep()
*/
mutex_unlock(&zfcp_sysfs_port_units_mutex);
@@ -158,9 +158,9 @@ STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt);
STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
STATIC void NCR_700_chip_setup(struct Scsi_Host *host);
STATIC void NCR_700_chip_reset(struct Scsi_Host *host);
-STATIC int NCR_700_slave_alloc(struct scsi_device *SDpnt);
+STATIC int NCR_700_sdev_prep(struct scsi_device *SDpnt);
STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt);
-STATIC void NCR_700_slave_destroy(struct scsi_device *SDpnt);
+STATIC void NCR_700_sdev_destroy(struct scsi_device *SDpnt);
static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth);
STATIC const struct attribute_group *NCR_700_dev_groups[];
@@ -331,8 +331,8 @@ NCR_700_detect(struct scsi_host_template *tpnt,
tpnt->sg_tablesize = NCR_700_SG_SEGMENTS;
tpnt->cmd_per_lun = NCR_700_CMD_PER_LUN;
tpnt->slave_configure = NCR_700_slave_configure;
- tpnt->slave_destroy = NCR_700_slave_destroy;
- tpnt->slave_alloc = NCR_700_slave_alloc;
+ tpnt->sdev_destroy = NCR_700_sdev_destroy;
+ tpnt->sdev_prep = NCR_700_sdev_prep;
tpnt->change_queue_depth = NCR_700_change_queue_depth;
if(tpnt->name == NULL)
@@ -2017,7 +2017,7 @@ NCR_700_set_offset(struct scsi_target *STp, int offset)
}
STATIC int
-NCR_700_slave_alloc(struct scsi_device *SDp)
+NCR_700_sdev_prep(struct scsi_device *SDp)
{
SDp->hostdata = kzalloc(sizeof(struct NCR_700_Device_Parameters),
GFP_KERNEL);
@@ -2052,7 +2052,7 @@ NCR_700_slave_configure(struct scsi_device *SDp)
}
STATIC void
-NCR_700_slave_destroy(struct scsi_device *SDp)
+NCR_700_sdev_destroy(struct scsi_device *SDp)
{
kfree(SDp->hostdata);
SDp->hostdata = NULL;
@@ -672,7 +672,7 @@ ahd_linux_target_destroy(struct scsi_target *starget)
}
static int
-ahd_linux_slave_alloc(struct scsi_device *sdev)
+ahd_linux_sdev_prep(struct scsi_device *sdev)
{
struct ahd_softc *ahd =
*((struct ahd_softc **)sdev->host->hostdata);
@@ -906,7 +906,7 @@ struct scsi_host_template aic79xx_driver_template = {
.this_id = -1,
.max_sectors = 8192,
.cmd_per_lun = 2,
- .slave_alloc = ahd_linux_slave_alloc,
+ .sdev_prep = ahd_linux_sdev_prep,
.slave_configure = ahd_linux_slave_configure,
.target_alloc = ahd_linux_target_alloc,
.target_destroy = ahd_linux_target_destroy,
@@ -632,7 +632,7 @@ ahc_linux_target_destroy(struct scsi_target *starget)
}
static int
-ahc_linux_slave_alloc(struct scsi_device *sdev)
+ahc_linux_sdev_prep(struct scsi_device *sdev)
{
struct ahc_softc *ahc =
*((struct ahc_softc **)sdev->host->hostdata);
@@ -791,7 +791,7 @@ struct scsi_host_template aic7xxx_driver_template = {
.this_id = -1,
.max_sectors = 8192,
.cmd_per_lun = 2,
- .slave_alloc = ahc_linux_slave_alloc,
+ .sdev_prep = ahc_linux_sdev_prep,
.slave_configure = ahc_linux_slave_configure,
.target_alloc = ahc_linux_target_alloc,
.target_destroy = ahc_linux_target_destroy,
@@ -25,7 +25,7 @@ struct scsi_transport_template *bfad_im_scsi_transport_template;
struct scsi_transport_template *bfad_im_scsi_vport_transport_template;
static void bfad_im_itnim_work_handler(struct work_struct *work);
static int bfad_im_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmnd);
-static int bfad_im_slave_alloc(struct scsi_device *sdev);
+static int bfad_im_sdev_prep(struct scsi_device *sdev);
static void bfad_im_fc_rport_add(struct bfad_im_port_s *im_port,
struct bfad_itnim_s *itnim);
@@ -404,10 +404,10 @@ bfad_im_reset_target_handler(struct scsi_cmnd *cmnd)
}
/*
- * Scsi_Host template entry slave_destroy.
+ * Scsi_Host template entry sdev_destroy.
*/
static void
-bfad_im_slave_destroy(struct scsi_device *sdev)
+bfad_im_sdev_destroy(struct scsi_device *sdev)
{
sdev->hostdata = NULL;
return;
@@ -800,9 +800,9 @@ struct scsi_host_template bfad_im_scsi_host_template = {
.eh_device_reset_handler = bfad_im_reset_lun_handler,
.eh_target_reset_handler = bfad_im_reset_target_handler,
- .slave_alloc = bfad_im_slave_alloc,
+ .sdev_prep = bfad_im_sdev_prep,
.slave_configure = bfad_im_slave_configure,
- .slave_destroy = bfad_im_slave_destroy,
+ .sdev_destroy = bfad_im_sdev_destroy,
.this_id = -1,
.sg_tablesize = BFAD_IO_MAX_SGE,
@@ -823,9 +823,9 @@ struct scsi_host_template bfad_im_vport_template = {
.eh_device_reset_handler = bfad_im_reset_lun_handler,
.eh_target_reset_handler = bfad_im_reset_target_handler,
- .slave_alloc = bfad_im_slave_alloc,
+ .sdev_prep = bfad_im_sdev_prep,
.slave_configure = bfad_im_slave_configure,
- .slave_destroy = bfad_im_slave_destroy,
+ .sdev_destroy = bfad_im_sdev_destroy,
.this_id = -1,
.sg_tablesize = BFAD_IO_MAX_SGE,
@@ -915,7 +915,7 @@ bfad_get_itnim(struct bfad_im_port_s *im_port, int id)
}
/*
- * Function is invoked from the SCSI Host Template slave_alloc() entry point.
+ * Function is invoked from the SCSI Host Template sdev_prep() entry point.
* Has the logic to query the LUN Mask database to check if this LUN needs to
* be made visible to the SCSI mid-layer or not.
*
@@ -946,10 +946,10 @@ bfad_im_check_if_make_lun_visible(struct scsi_device *sdev,
}
/*
- * Scsi_Host template entry slave_alloc
+ * Scsi_Host template entry sdev_prep
*/
static int
-bfad_im_slave_alloc(struct scsi_device *sdev)
+bfad_im_sdev_prep(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
struct bfad_itnim_data_s *itnim_data;
@@ -2951,7 +2951,7 @@ static struct scsi_host_template bnx2fc_shost_template = {
.eh_device_reset_handler = bnx2fc_eh_device_reset, /* lun reset */
.eh_target_reset_handler = bnx2fc_eh_target_reset, /* tgt reset */
.eh_host_reset_handler = fc_eh_host_reset,
- .slave_alloc = fc_slave_alloc,
+ .sdev_prep = fc_sdev_prep,
.change_queue_depth = scsi_change_queue_depth,
.this_id = -1,
.cmd_per_lun = 3,
@@ -2224,7 +2224,7 @@ csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
}
static int
-csio_slave_alloc(struct scsi_device *sdev)
+csio_sdev_prep(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
@@ -2244,7 +2244,7 @@ csio_slave_configure(struct scsi_device *sdev)
}
static void
-csio_slave_destroy(struct scsi_device *sdev)
+csio_sdev_destroy(struct scsi_device *sdev)
{
sdev->hostdata = NULL;
}
@@ -2276,9 +2276,9 @@ struct scsi_host_template csio_fcoe_shost_template = {
.eh_timed_out = fc_eh_timed_out,
.eh_abort_handler = csio_eh_abort_handler,
.eh_device_reset_handler = csio_eh_lun_reset_handler,
- .slave_alloc = csio_slave_alloc,
+ .sdev_prep = csio_sdev_prep,
.slave_configure = csio_slave_configure,
- .slave_destroy = csio_slave_destroy,
+ .sdev_destroy = csio_sdev_destroy,
.scan_finished = csio_scan_finished,
.this_id = -1,
.sg_tablesize = CSIO_SCSI_MAX_SGE,
@@ -2295,9 +2295,9 @@ struct scsi_host_template csio_fcoe_shost_vport_template = {
.eh_timed_out = fc_eh_timed_out,
.eh_abort_handler = csio_eh_abort_handler,
.eh_device_reset_handler = csio_eh_lun_reset_handler,
- .slave_alloc = csio_slave_alloc,
+ .sdev_prep = csio_sdev_prep,
.slave_configure = csio_slave_configure,
- .slave_destroy = csio_slave_destroy,
+ .sdev_destroy = csio_sdev_destroy,
.scan_finished = csio_scan_finished,
.this_id = -1,
.sg_tablesize = CSIO_SCSI_MAX_SGE,
@@ -3715,13 +3715,13 @@ static void adapter_remove_and_free_all_devices(struct AdapterCtlBlk* acb)
/**
- * dc395x_slave_alloc - Called by the scsi mid layer to tell us about a new
+ * dc395x_sdev_prep - Called by the scsi mid layer to tell us about a new
* scsi device that we need to deal with. We allocate a new device and then
* insert that device into the adapters device list.
*
* @scsi_device: The new scsi device that we need to handle.
**/
-static int dc395x_slave_alloc(struct scsi_device *scsi_device)
+static int dc395x_sdev_prep(struct scsi_device *scsi_device)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
struct DeviceCtlBlk *dcb;
@@ -3736,12 +3736,12 @@ static int dc395x_slave_alloc(struct scsi_device *scsi_device)
/**
- * dc395x_slave_destroy - Called by the scsi mid layer to tell us about a
+ * dc395x_sdev_destroy - Called by the scsi mid layer to tell us about a
* device that is going away.
*
* @scsi_device: The new scsi device that we need to handle.
**/
-static void dc395x_slave_destroy(struct scsi_device *scsi_device)
+static void dc395x_sdev_destroy(struct scsi_device *scsi_device)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
struct DeviceCtlBlk *dcb = find_dcb(acb, scsi_device->id, scsi_device->lun);
@@ -4547,8 +4547,8 @@ static const struct scsi_host_template dc395x_driver_template = {
.show_info = dc395x_show_info,
.name = DC395X_BANNER " " DC395X_VERSION,
.queuecommand = dc395x_queue_command,
- .slave_alloc = dc395x_slave_alloc,
- .slave_destroy = dc395x_slave_destroy,
+ .sdev_prep = dc395x_sdev_prep,
+ .sdev_destroy = dc395x_sdev_destroy,
.can_queue = DC395x_MAX_CAN_QUEUE,
.this_id = 7,
.sg_tablesize = DC395x_MAX_SG_TABLESIZE,
@@ -2441,7 +2441,7 @@ static void esp_target_destroy(struct scsi_target *starget)
tp->starget = NULL;
}
-static int esp_slave_alloc(struct scsi_device *dev)
+static int esp_sdev_prep(struct scsi_device *dev)
{
struct esp *esp = shost_priv(dev->host);
struct esp_target_data *tp = &esp->target[dev->id];
@@ -2479,7 +2479,7 @@ static int esp_slave_configure(struct scsi_device *dev)
return 0;
}
-static void esp_slave_destroy(struct scsi_device *dev)
+static void esp_sdev_destroy(struct scsi_device *dev)
{
struct esp_lun_data *lp = dev->hostdata;
@@ -2667,9 +2667,9 @@ const struct scsi_host_template scsi_esp_template = {
.queuecommand = esp_queuecommand,
.target_alloc = esp_target_alloc,
.target_destroy = esp_target_destroy,
- .slave_alloc = esp_slave_alloc,
+ .sdev_prep = esp_sdev_prep,
.slave_configure = esp_slave_configure,
- .slave_destroy = esp_slave_destroy,
+ .sdev_destroy = esp_sdev_destroy,
.eh_abort_handler = esp_eh_abort_handler,
.eh_bus_reset_handler = esp_eh_bus_reset_handler,
.eh_host_reset_handler = esp_eh_host_reset_handler,
@@ -269,7 +269,7 @@ static const struct scsi_host_template fcoe_shost_template = {
.eh_abort_handler = fc_eh_abort,
.eh_device_reset_handler = fc_eh_device_reset,
.eh_host_reset_handler = fc_eh_host_reset,
- .slave_alloc = fc_slave_alloc,
+ .sdev_prep = fc_sdev_prep,
.change_queue_depth = scsi_change_queue_depth,
.this_id = -1,
.cmd_per_lun = 3,
@@ -87,7 +87,7 @@ static struct libfc_function_template fnic_transport_template = {
.exch_mgr_reset = fnic_exch_mgr_reset
};
-static int fnic_slave_alloc(struct scsi_device *sdev)
+static int fnic_sdev_prep(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
@@ -106,7 +106,7 @@ static const struct scsi_host_template fnic_host_template = {
.eh_abort_handler = fnic_abort_cmd,
.eh_device_reset_handler = fnic_device_reset,
.eh_host_reset_handler = fnic_host_reset,
- .slave_alloc = fnic_slave_alloc,
+ .sdev_prep = fnic_sdev_prep,
.change_queue_depth = scsi_change_queue_depth,
.this_id = -1,
.cmd_per_lun = 3,
@@ -645,7 +645,7 @@ extern void hisi_sas_remove(struct platform_device *pdev);
int hisi_sas_device_configure(struct scsi_device *sdev,
struct queue_limits *lim);
-extern int hisi_sas_slave_alloc(struct scsi_device *sdev);
+extern int hisi_sas_sdev_prep(struct scsi_device *sdev);
extern int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time);
extern void hisi_sas_scan_start(struct Scsi_Host *shost);
extern int hisi_sas_host_reset(struct Scsi_Host *shost, int reset_type);
@@ -805,13 +805,13 @@ static int hisi_sas_init_device(struct domain_device *device)
return rc;
}
-int hisi_sas_slave_alloc(struct scsi_device *sdev)
+int hisi_sas_sdev_prep(struct scsi_device *sdev)
{
struct domain_device *ddev = sdev_to_domain_dev(sdev);
struct hisi_sas_device *sas_dev = ddev->lldd_dev;
int rc;
- rc = sas_slave_alloc(sdev);
+ rc = sas_sdev_prep(sdev);
if (rc)
return rc;
@@ -821,7 +821,7 @@ int hisi_sas_slave_alloc(struct scsi_device *sdev)
sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
return 0;
}
-EXPORT_SYMBOL_GPL(hisi_sas_slave_alloc);
+EXPORT_SYMBOL_GPL(hisi_sas_sdev_prep);
static int hisi_sas_dev_found(struct domain_device *device)
{
@@ -1740,7 +1740,7 @@ static const struct scsi_host_template sht_v1_hw = {
.scan_finished = hisi_sas_scan_finished,
.scan_start = hisi_sas_scan_start,
.sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
- .slave_alloc = hisi_sas_slave_alloc,
+ .sdev_prep = hisi_sas_sdev_prep,
.shost_groups = host_v1_hw_groups,
.host_reset = hisi_sas_host_reset,
};
@@ -3572,7 +3572,7 @@ static const struct scsi_host_template sht_v2_hw = {
.scan_finished = hisi_sas_scan_finished,
.scan_start = hisi_sas_scan_start,
.sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
- .slave_alloc = hisi_sas_slave_alloc,
+ .sdev_prep = hisi_sas_sdev_prep,
.shost_groups = host_v2_hw_groups,
.sdev_groups = sdev_groups_v2_hw,
.host_reset = hisi_sas_host_reset,
@@ -3336,7 +3336,7 @@ static const struct scsi_host_template sht_v3_hw = {
.map_queues = hisi_sas_map_queues,
.sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.sg_prot_tablesize = HISI_SAS_SGE_PAGE_CNT,
- .slave_alloc = hisi_sas_slave_alloc,
+ .sdev_prep = hisi_sas_sdev_prep,
.shost_groups = host_v3_hw_groups,
.sdev_groups = sdev_groups_v3_hw,
.tag_alloc_policy = BLK_TAG_ALLOC_RR,
@@ -283,9 +283,9 @@ static int hpsa_scan_finished(struct Scsi_Host *sh,
static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth);
static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
-static int hpsa_slave_alloc(struct scsi_device *sdev);
+static int hpsa_sdev_prep(struct scsi_device *sdev);
static int hpsa_slave_configure(struct scsi_device *sdev);
-static void hpsa_slave_destroy(struct scsi_device *sdev);
+static void hpsa_sdev_destroy(struct scsi_device *sdev);
static void hpsa_update_scsi_devices(struct ctlr_info *h);
static int check_for_unit_attention(struct ctlr_info *h,
@@ -978,9 +978,9 @@ static const struct scsi_host_template hpsa_driver_template = {
.this_id = -1,
.eh_device_reset_handler = hpsa_eh_device_reset_handler,
.ioctl = hpsa_ioctl,
- .slave_alloc = hpsa_slave_alloc,
+ .sdev_prep = hpsa_sdev_prep,
.slave_configure = hpsa_slave_configure,
- .slave_destroy = hpsa_slave_destroy,
+ .sdev_destroy = hpsa_sdev_destroy,
#ifdef CONFIG_COMPAT
.compat_ioctl = hpsa_compat_ioctl,
#endif
@@ -2107,7 +2107,7 @@ static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h,
return NULL;
}
-static int hpsa_slave_alloc(struct scsi_device *sdev)
+static int hpsa_sdev_prep(struct scsi_device *sdev)
{
struct hpsa_scsi_dev_t *sd = NULL;
unsigned long flags;
@@ -2173,7 +2173,7 @@ static int hpsa_slave_configure(struct scsi_device *sdev)
return 0;
}
-static void hpsa_slave_destroy(struct scsi_device *sdev)
+static void hpsa_sdev_destroy(struct scsi_device *sdev)
{
struct hpsa_scsi_dev_t *hdev = NULL;
@@ -3393,7 +3393,7 @@ static int ibmvfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
}
/**
- * ibmvfc_slave_alloc - Setup the device's task set value
+ * ibmvfc_sdev_prep - Setup the device's task set value
* @sdev: struct scsi_device device to configure
*
* Set the device's task set value so that error handling works as
@@ -3402,7 +3402,7 @@ static int ibmvfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
* Returns:
* 0 on success / -ENXIO if device does not exist
**/
-static int ibmvfc_slave_alloc(struct scsi_device *sdev)
+static int ibmvfc_sdev_prep(struct scsi_device *sdev)
{
struct Scsi_Host *shost = sdev->host;
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
@@ -3696,7 +3696,7 @@ static const struct scsi_host_template driver_template = {
.eh_device_reset_handler = ibmvfc_eh_device_reset_handler,
.eh_target_reset_handler = ibmvfc_eh_target_reset_handler,
.eh_host_reset_handler = ibmvfc_eh_host_reset_handler,
- .slave_alloc = ibmvfc_slave_alloc,
+ .sdev_prep = ibmvfc_sdev_prep,
.slave_configure = ibmvfc_slave_configure,
.target_alloc = ibmvfc_target_alloc,
.scan_finished = ibmvfc_scan_finished,
@@ -4745,13 +4745,13 @@ static struct ipr_resource_entry *ipr_find_sdev(struct scsi_device *sdev)
}
/**
- * ipr_slave_destroy - Unconfigure a SCSI device
+ * ipr_sdev_destroy - Unconfigure a SCSI device
* @sdev: scsi device struct
*
* Return value:
* nothing
**/
-static void ipr_slave_destroy(struct scsi_device *sdev)
+static void ipr_sdev_destroy(struct scsi_device *sdev)
{
struct ipr_resource_entry *res;
struct ipr_ioa_cfg *ioa_cfg;
@@ -4815,7 +4815,7 @@ static int ipr_device_configure(struct scsi_device *sdev,
}
/**
- * ipr_slave_alloc - Prepare for commands to a device.
+ * ipr_sdev_prep - Prepare for commands to a device.
* @sdev: scsi device struct
*
* This function saves a pointer to the resource entry
@@ -4826,7 +4826,7 @@ static int ipr_device_configure(struct scsi_device *sdev,
* Return value:
* 0 on success / -ENXIO if device does not exist
**/
-static int ipr_slave_alloc(struct scsi_device *sdev)
+static int ipr_sdev_prep(struct scsi_device *sdev)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
struct ipr_resource_entry *res;
@@ -6398,9 +6398,9 @@ static const struct scsi_host_template driver_template = {
.eh_abort_handler = ipr_eh_abort,
.eh_device_reset_handler = ipr_eh_dev_reset,
.eh_host_reset_handler = ipr_eh_host_reset,
- .slave_alloc = ipr_slave_alloc,
+ .sdev_prep = ipr_sdev_prep,
.device_configure = ipr_device_configure,
- .slave_destroy = ipr_slave_destroy,
+ .sdev_destroy = ipr_sdev_destroy,
.scan_finished = ipr_scan_finished,
.target_destroy = ipr_target_destroy,
.change_queue_depth = ipr_change_queue_depth,
@@ -2222,13 +2222,13 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
EXPORT_SYMBOL(fc_eh_host_reset);
/**
- * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
+ * fc_sdev_prep() - Configure the queue depth of a Scsi_Host
* @sdev: The SCSI device that identifies the SCSI host
*
* Configures queue depth based on host's cmd_per_len. If not set
* then we use the libfc default.
*/
-int fc_slave_alloc(struct scsi_device *sdev)
+int fc_sdev_prep(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
@@ -2238,7 +2238,7 @@ int fc_slave_alloc(struct scsi_device *sdev)
scsi_change_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
return 0;
}
-EXPORT_SYMBOL(fc_slave_alloc);
+EXPORT_SYMBOL(fc_sdev_prep);
/**
* fc_fcp_destroy() - Tear down the FCP layer for a given local port
@@ -1194,14 +1194,14 @@ void sas_task_abort(struct sas_task *task)
}
EXPORT_SYMBOL_GPL(sas_task_abort);
-int sas_slave_alloc(struct scsi_device *sdev)
+int sas_sdev_prep(struct scsi_device *sdev)
{
if (dev_is_sata(sdev_to_domain_dev(sdev)) && sdev->lun)
return -ENXIO;
return 0;
}
-EXPORT_SYMBOL_GPL(sas_slave_alloc);
+EXPORT_SYMBOL_GPL(sas_sdev_prep);
void sas_target_destroy(struct scsi_target *starget)
{
@@ -6226,7 +6226,7 @@ lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
}
/**
- * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
+ * lpfc_sdev_prep - scsi_host_template sdev_prep entry point
* @sdev: Pointer to scsi_device.
*
* This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's
@@ -6239,7 +6239,7 @@ lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
* 0 - Success
**/
static int
-lpfc_slave_alloc(struct scsi_device *sdev)
+lpfc_sdev_prep(struct scsi_device *sdev)
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
@@ -6371,13 +6371,13 @@ lpfc_slave_configure(struct scsi_device *sdev)
}
/**
- * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
+ * lpfc_sdev_destroy - sdev_destroy entry point of SHT data structure
* @sdev: Pointer to scsi_device.
*
* This routine sets @sdev hostatdata filed to null.
**/
static void
-lpfc_slave_destroy(struct scsi_device *sdev)
+lpfc_sdev_destroy(struct scsi_device *sdev)
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
@@ -6737,7 +6737,7 @@ lpfc_no_command(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
}
static int
-lpfc_no_slave(struct scsi_device *sdev)
+lpfc_no_sdev(struct scsi_device *sdev)
{
return -ENODEV;
}
@@ -6748,8 +6748,8 @@ struct scsi_host_template lpfc_template_nvme = {
.proc_name = LPFC_DRIVER_NAME,
.info = lpfc_info,
.queuecommand = lpfc_no_command,
- .slave_alloc = lpfc_no_slave,
- .slave_configure = lpfc_no_slave,
+ .sdev_prep = lpfc_no_sdev,
+ .slave_configure = lpfc_no_sdev,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
.sg_tablesize = 1,
@@ -6772,9 +6772,9 @@ struct scsi_host_template lpfc_template = {
.eh_device_reset_handler = lpfc_device_reset_handler,
.eh_target_reset_handler = lpfc_target_reset_handler,
.eh_host_reset_handler = lpfc_host_reset_handler,
- .slave_alloc = lpfc_slave_alloc,
+ .sdev_prep = lpfc_sdev_prep,
.slave_configure = lpfc_slave_configure,
- .slave_destroy = lpfc_slave_destroy,
+ .sdev_destroy = lpfc_sdev_destroy,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
.sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
@@ -6799,9 +6799,9 @@ struct scsi_host_template lpfc_vport_template = {
.eh_target_reset_handler = lpfc_target_reset_handler,
.eh_bus_reset_handler = NULL,
.eh_host_reset_handler = NULL,
- .slave_alloc = lpfc_slave_alloc,
+ .sdev_prep = lpfc_sdev_prep,
.slave_configure = lpfc_slave_configure,
- .slave_destroy = lpfc_slave_destroy,
+ .sdev_destroy = lpfc_sdev_destroy,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
.sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
@@ -2109,7 +2109,7 @@ static int megasas_device_configure(struct scsi_device *sdev,
return 0;
}
-static int megasas_slave_alloc(struct scsi_device *sdev)
+static int megasas_sdev_prep(struct scsi_device *sdev)
{
u16 pd_index = 0, ld_tgt_id;
struct megasas_instance *instance ;
@@ -2154,7 +2154,7 @@ static int megasas_slave_alloc(struct scsi_device *sdev)
return 0;
}
-static void megasas_slave_destroy(struct scsi_device *sdev)
+static void megasas_sdev_destroy(struct scsi_device *sdev)
{
u16 ld_tgt_id;
struct megasas_instance *instance;
@@ -3511,8 +3511,8 @@ static const struct scsi_host_template megasas_template = {
.name = "Avago SAS based MegaRAID driver",
.proc_name = "megaraid_sas",
.device_configure = megasas_device_configure,
- .slave_alloc = megasas_slave_alloc,
- .slave_destroy = megasas_slave_destroy,
+ .sdev_prep = megasas_sdev_prep,
+ .sdev_destroy = megasas_sdev_destroy,
.queuecommand = megasas_queue_command,
.eh_target_reset_handler = megasas_reset_target,
.eh_abort_handler = megasas_task_abort,
@@ -4465,14 +4465,14 @@ static int mpi3mr_scan_finished(struct Scsi_Host *shost,
}
/**
- * mpi3mr_slave_destroy - Slave destroy callback handler
+ * mpi3mr_sdev_destroy - Slave destroy callback handler
* @sdev: SCSI device reference
*
* Cleanup and free per device(lun) private data.
*
* Return: Nothing.
*/
-static void mpi3mr_slave_destroy(struct scsi_device *sdev)
+static void mpi3mr_sdev_destroy(struct scsi_device *sdev)
{
struct Scsi_Host *shost;
struct mpi3mr_ioc *mrioc;
@@ -4599,14 +4599,14 @@ static int mpi3mr_device_configure(struct scsi_device *sdev,
}
/**
- * mpi3mr_slave_alloc -Slave alloc callback handler
+ * mpi3mr_sdev_prep -Slave alloc callback handler
* @sdev: SCSI device reference
*
* Allocate per device(lun) private data and initialize it.
*
* Return: 0 on success -ENOMEM on memory allocation failure.
*/
-static int mpi3mr_slave_alloc(struct scsi_device *sdev)
+static int mpi3mr_sdev_prep(struct scsi_device *sdev)
{
struct Scsi_Host *shost;
struct mpi3mr_ioc *mrioc;
@@ -5062,10 +5062,10 @@ static const struct scsi_host_template mpi3mr_driver_template = {
.proc_name = MPI3MR_DRIVER_NAME,
.queuecommand = mpi3mr_qcmd,
.target_alloc = mpi3mr_target_alloc,
- .slave_alloc = mpi3mr_slave_alloc,
+ .sdev_prep = mpi3mr_sdev_prep,
.device_configure = mpi3mr_device_configure,
.target_destroy = mpi3mr_target_destroy,
- .slave_destroy = mpi3mr_slave_destroy,
+ .sdev_destroy = mpi3mr_sdev_destroy,
.scan_finished = mpi3mr_scan_finished,
.scan_start = mpi3mr_scan_start,
.change_queue_depth = mpi3mr_change_queue_depth,
@@ -2026,14 +2026,14 @@ scsih_target_destroy(struct scsi_target *starget)
}
/**
- * scsih_slave_alloc - device add routine
+ * scsih_sdev_prep - device add routine
* @sdev: scsi device struct
*
* Return: 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
static int
-scsih_slave_alloc(struct scsi_device *sdev)
+scsih_sdev_prep(struct scsi_device *sdev)
{
struct Scsi_Host *shost;
struct MPT3SAS_ADAPTER *ioc;
@@ -2108,11 +2108,11 @@ scsih_slave_alloc(struct scsi_device *sdev)
}
/**
- * scsih_slave_destroy - device destroy routine
+ * scsih_sdev_destroy - device destroy routine
* @sdev: scsi device struct
*/
static void
-scsih_slave_destroy(struct scsi_device *sdev)
+scsih_sdev_destroy(struct scsi_device *sdev)
{
struct MPT3SAS_TARGET *sas_target_priv_data;
struct scsi_target *starget;
@@ -11905,10 +11905,10 @@ static const struct scsi_host_template mpt2sas_driver_template = {
.proc_name = MPT2SAS_DRIVER_NAME,
.queuecommand = scsih_qcmd,
.target_alloc = scsih_target_alloc,
- .slave_alloc = scsih_slave_alloc,
+ .sdev_prep = scsih_sdev_prep,
.device_configure = scsih_device_configure,
.target_destroy = scsih_target_destroy,
- .slave_destroy = scsih_slave_destroy,
+ .sdev_destroy = scsih_sdev_destroy,
.scan_finished = scsih_scan_finished,
.scan_start = scsih_scan_start,
.change_queue_depth = scsih_change_queue_depth,
@@ -11943,10 +11943,10 @@ static const struct scsi_host_template mpt3sas_driver_template = {
.proc_name = MPT3SAS_DRIVER_NAME,
.queuecommand = scsih_qcmd,
.target_alloc = scsih_target_alloc,
- .slave_alloc = scsih_slave_alloc,
+ .sdev_prep = scsih_sdev_prep,
.device_configure = scsih_device_configure,
.target_destroy = scsih_target_destroy,
- .slave_destroy = scsih_slave_destroy,
+ .sdev_destroy = scsih_sdev_destroy,
.scan_finished = scsih_scan_finished,
.scan_start = scsih_scan_start,
.change_queue_depth = scsih_change_queue_depth,
@@ -1619,7 +1619,7 @@ static int myrb_queuecommand(struct Scsi_Host *shost,
return myrb_pthru_queuecommand(shost, scmd);
}
-static int myrb_ldev_slave_alloc(struct scsi_device *sdev)
+static int myrb_ldev_sdev_prep(struct scsi_device *sdev)
{
struct myrb_hba *cb = shost_priv(sdev->host);
struct myrb_ldev_info *ldev_info;
@@ -1665,7 +1665,7 @@ static int myrb_ldev_slave_alloc(struct scsi_device *sdev)
return 0;
}
-static int myrb_pdev_slave_alloc(struct scsi_device *sdev)
+static int myrb_pdev_sdev_prep(struct scsi_device *sdev)
{
struct myrb_hba *cb = shost_priv(sdev->host);
struct myrb_pdev_state *pdev_info;
@@ -1701,7 +1701,7 @@ static int myrb_pdev_slave_alloc(struct scsi_device *sdev)
return 0;
}
-static int myrb_slave_alloc(struct scsi_device *sdev)
+static int myrb_sdev_prep(struct scsi_device *sdev)
{
if (sdev->channel > myrb_logical_channel(sdev->host))
return -ENXIO;
@@ -1710,9 +1710,9 @@ static int myrb_slave_alloc(struct scsi_device *sdev)
return -ENXIO;
if (sdev->channel == myrb_logical_channel(sdev->host))
- return myrb_ldev_slave_alloc(sdev);
+ return myrb_ldev_sdev_prep(sdev);
- return myrb_pdev_slave_alloc(sdev);
+ return myrb_pdev_sdev_prep(sdev);
}
static int myrb_slave_configure(struct scsi_device *sdev)
@@ -1741,7 +1741,7 @@ static int myrb_slave_configure(struct scsi_device *sdev)
return 0;
}
-static void myrb_slave_destroy(struct scsi_device *sdev)
+static void myrb_sdev_destroy(struct scsi_device *sdev)
{
kfree(sdev->hostdata);
}
@@ -2208,9 +2208,9 @@ static const struct scsi_host_template myrb_template = {
.proc_name = "myrb",
.queuecommand = myrb_queuecommand,
.eh_host_reset_handler = myrb_host_reset,
- .slave_alloc = myrb_slave_alloc,
+ .sdev_prep = myrb_sdev_prep,
.slave_configure = myrb_slave_configure,
- .slave_destroy = myrb_slave_destroy,
+ .sdev_destroy = myrb_sdev_destroy,
.bios_param = myrb_biosparam,
.cmd_size = sizeof(struct myrb_cmdblk),
.shost_groups = myrb_shost_groups,
@@ -1786,7 +1786,7 @@ static unsigned short myrs_translate_ldev(struct myrs_hba *cs,
return ldev_num;
}
-static int myrs_slave_alloc(struct scsi_device *sdev)
+static int myrs_sdev_prep(struct scsi_device *sdev)
{
struct myrs_hba *cs = shost_priv(sdev->host);
unsigned char status;
@@ -1910,7 +1910,7 @@ static int myrs_slave_configure(struct scsi_device *sdev)
return 0;
}
-static void myrs_slave_destroy(struct scsi_device *sdev)
+static void myrs_sdev_destroy(struct scsi_device *sdev)
{
kfree(sdev->hostdata);
}
@@ -1921,9 +1921,9 @@ static const struct scsi_host_template myrs_template = {
.proc_name = "myrs",
.queuecommand = myrs_queuecommand,
.eh_host_reset_handler = myrs_host_reset,
- .slave_alloc = myrs_slave_alloc,
+ .sdev_prep = myrs_sdev_prep,
.slave_configure = myrs_slave_configure,
- .slave_destroy = myrs_slave_destroy,
+ .sdev_destroy = myrs_sdev_destroy,
.cmd_size = sizeof(struct myrs_cmdblk),
.shost_groups = myrs_shost_groups,
.sdev_groups = myrs_sdev_groups,
@@ -7786,7 +7786,7 @@ static void __init ncr_getclock (struct ncb *np, int mult)
/*===================== LINUX ENTRY POINTS SECTION ==========================*/
-static int ncr53c8xx_slave_alloc(struct scsi_device *device)
+static int ncr53c8xx_sdev_prep(struct scsi_device *device)
{
struct Scsi_Host *host = device->host;
struct ncb *np = ((struct host_data *) host->hostdata)->ncb;
@@ -8094,7 +8094,7 @@ struct Scsi_Host * __init ncr_attach(struct scsi_host_template *tpnt,
tpnt->queuecommand = ncr53c8xx_queue_command;
tpnt->slave_configure = ncr53c8xx_slave_configure;
- tpnt->slave_alloc = ncr53c8xx_slave_alloc;
+ tpnt->sdev_prep = ncr53c8xx_sdev_prep;
tpnt->eh_bus_reset_handler = ncr53c8xx_bus_reset;
tpnt->can_queue = SCSI_NCR_CAN_QUEUE;
tpnt->this_id = 7;
@@ -125,7 +125,7 @@ MODULE_DEVICE_TABLE(pci, pmcraid_pci_table);
/**
- * pmcraid_slave_alloc - Prepare for commands to a device
+ * pmcraid_sdev_prep - Prepare for commands to a device
* @scsi_dev: scsi device struct
*
* This function is called by mid-layer prior to sending any command to the new
@@ -136,7 +136,7 @@ MODULE_DEVICE_TABLE(pci, pmcraid_pci_table);
* Return value:
* 0 on success / -ENXIO if device does not exist
*/
-static int pmcraid_slave_alloc(struct scsi_device *scsi_dev)
+static int pmcraid_sdev_prep(struct scsi_device *scsi_dev)
{
struct pmcraid_resource_entry *temp, *res = NULL;
struct pmcraid_instance *pinstance;
@@ -248,17 +248,17 @@ static int pmcraid_device_configure(struct scsi_device *scsi_dev,
}
/**
- * pmcraid_slave_destroy - Unconfigure a SCSI device before removing it
+ * pmcraid_sdev_destroy - Unconfigure a SCSI device before removing it
*
* @scsi_dev: scsi device struct
*
* This is called by mid-layer before removing a device. Pointer assignments
- * done in pmcraid_slave_alloc will be reset to NULL here.
+ * done in pmcraid_sdev_prep will be reset to NULL here.
*
* Return value
* none
*/
-static void pmcraid_slave_destroy(struct scsi_device *scsi_dev)
+static void pmcraid_sdev_destroy(struct scsi_device *scsi_dev)
{
struct pmcraid_resource_entry *res;
@@ -3668,9 +3668,9 @@ static const struct scsi_host_template pmcraid_host_template = {
.eh_device_reset_handler = pmcraid_eh_device_reset_handler,
.eh_host_reset_handler = pmcraid_eh_host_reset_handler,
- .slave_alloc = pmcraid_slave_alloc,
+ .sdev_prep = pmcraid_sdev_prep,
.device_configure = pmcraid_device_configure,
- .slave_destroy = pmcraid_slave_destroy,
+ .sdev_destroy = pmcraid_sdev_destroy,
.change_queue_depth = pmcraid_change_queue_depth,
.can_queue = PMCRAID_MAX_IO_CMD,
.this_id = -1,
@@ -1934,7 +1934,7 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
}
static int
-qla2xxx_slave_alloc(struct scsi_device *sdev)
+qla2xxx_sdev_prep(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
@@ -1957,7 +1957,7 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
}
static void
-qla2xxx_slave_destroy(struct scsi_device *sdev)
+qla2xxx_sdev_destroy(struct scsi_device *sdev)
{
sdev->hostdata = NULL;
}
@@ -8088,8 +8088,8 @@ struct scsi_host_template qla2xxx_driver_template = {
.slave_configure = qla2xxx_slave_configure,
- .slave_alloc = qla2xxx_slave_alloc,
- .slave_destroy = qla2xxx_slave_destroy,
+ .sdev_prep = qla2xxx_sdev_prep,
+ .sdev_destroy = qla2xxx_sdev_destroy,
.scan_finished = qla2xxx_scan_finished,
.scan_start = qla2xxx_scan_start,
.change_queue_depth = scsi_change_queue_depth,
@@ -160,7 +160,7 @@ static int qla4xxx_eh_abort(struct scsi_cmnd *cmd);
static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
-static int qla4xxx_slave_alloc(struct scsi_device *device);
+static int qla4xxx_sdev_prep(struct scsi_device *device);
static umode_t qla4_attr_is_visible(int param_type, int param);
static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type);
@@ -234,7 +234,7 @@ static struct scsi_host_template qla4xxx_driver_template = {
.eh_host_reset_handler = qla4xxx_eh_host_reset,
.eh_timed_out = qla4xxx_eh_cmd_timed_out,
- .slave_alloc = qla4xxx_slave_alloc,
+ .sdev_prep = qla4xxx_sdev_prep,
.change_queue_depth = scsi_change_queue_depth,
.this_id = -1,
@@ -9052,7 +9052,7 @@ static void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha)
}
}
-static int qla4xxx_slave_alloc(struct scsi_device *sdev)
+static int qla4xxx_sdev_prep(struct scsi_device *sdev)
{
struct iscsi_cls_session *cls_sess;
struct iscsi_session *sess;
@@ -5881,10 +5881,10 @@ static struct sdebug_dev_info *find_build_dev_info(struct scsi_device *sdev)
return open_devip;
}
-static int scsi_debug_slave_alloc(struct scsi_device *sdp)
+static int scsi_debug_sdev_prep(struct scsi_device *sdp)
{
if (sdebug_verbose)
- pr_info("slave_alloc <%u %u %u %llu>\n",
+ pr_info("sdev_prep <%u %u %u %llu>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
return 0;
@@ -5929,14 +5929,14 @@ static int scsi_debug_slave_configure(struct scsi_device *sdp)
return 0;
}
-static void scsi_debug_slave_destroy(struct scsi_device *sdp)
+static void scsi_debug_sdev_destroy(struct scsi_device *sdp)
{
struct sdebug_dev_info *devip =
(struct sdebug_dev_info *)sdp->hostdata;
struct sdebug_err_inject *err;
if (sdebug_verbose)
- pr_info("slave_destroy <%u %u %u %llu>\n",
+ pr_info("sdev_destroy <%u %u %u %llu>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
if (!devip)
@@ -8714,9 +8714,9 @@ static struct scsi_host_template sdebug_driver_template = {
.proc_name = sdebug_proc_name,
.name = "SCSI DEBUG",
.info = scsi_debug_info,
- .slave_alloc = scsi_debug_slave_alloc,
+ .sdev_prep = scsi_debug_sdev_prep,
.slave_configure = scsi_debug_slave_configure,
- .slave_destroy = scsi_debug_slave_destroy,
+ .sdev_destroy = scsi_debug_sdev_destroy,
.ioctl = scsi_debug_ioctl,
.queuecommand = scsi_debug_queuecommand,
.change_queue_depth = sdebug_change_qdepth,
@@ -265,7 +265,7 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev,
* scsi_alloc_sdev - allocate and setup a scsi_Device
* @starget: which target to allocate a &scsi_device for
* @lun: which lun
- * @hostdata: usually NULL and set by ->slave_alloc instead
+ * @hostdata: usually NULL and set by ->sdev_prep instead
*
* Description:
* Allocate, initialize for io, and return a pointer to a scsi_Device.
@@ -312,7 +312,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
sdev->sdev_gendev.parent = get_device(&starget->dev);
sdev->sdev_target = starget;
- /* usually NULL and set by ->slave_alloc instead */
+ /* usually NULL and set by ->sdev_prep instead */
sdev->hostdata = hostdata;
/* if the device needs this changing, it may do so in the
@@ -363,8 +363,8 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
scsi_sysfs_device_initialize(sdev);
- if (shost->hostt->slave_alloc) {
- ret = shost->hostt->slave_alloc(sdev);
+ if (shost->hostt->sdev_prep) {
+ ret = shost->hostt->sdev_prep(sdev);
if (ret) {
/*
* if LLDD reports slave not present, don't clutter
@@ -1513,8 +1513,8 @@ void __scsi_remove_device(struct scsi_device *sdev)
kref_put(&sdev->host->tagset_refcnt, scsi_mq_free_tags);
cancel_work_sync(&sdev->requeue_work);
- if (sdev->host->hostt->slave_destroy)
- sdev->host->hostt->slave_destroy(sdev);
+ if (sdev->host->hostt->sdev_destroy)
+ sdev->host->hostt->sdev_destroy(sdev);
transport_destroy_device(dev);
/*
@@ -6490,7 +6490,7 @@ static int pqi_eh_abort_handler(struct scsi_cmnd *scmd)
return SUCCESS;
}
-static int pqi_slave_alloc(struct scsi_device *sdev)
+static int pqi_sdev_prep(struct scsi_device *sdev)
{
struct pqi_scsi_dev *device;
unsigned long flags;
@@ -6574,7 +6574,7 @@ static int pqi_slave_configure(struct scsi_device *sdev)
return rc;
}
-static void pqi_slave_destroy(struct scsi_device *sdev)
+static void pqi_sdev_destroy(struct scsi_device *sdev)
{
struct pqi_ctrl_info *ctrl_info;
struct pqi_scsi_dev *device;
@@ -7549,9 +7549,9 @@ static const struct scsi_host_template pqi_driver_template = {
.eh_device_reset_handler = pqi_eh_device_reset_handler,
.eh_abort_handler = pqi_eh_abort_handler,
.ioctl = pqi_ioctl,
- .slave_alloc = pqi_slave_alloc,
+ .sdev_prep = pqi_sdev_prep,
.slave_configure = pqi_slave_configure,
- .slave_destroy = pqi_slave_destroy,
+ .sdev_destroy = pqi_sdev_destroy,
.map_queues = pqi_map_queues,
.sdev_groups = pqi_sdev_groups,
.shost_groups = pqi_shost_groups,
@@ -42,11 +42,11 @@ module_param(snic_max_qdepth, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(snic_max_qdepth, "Queue depth to report for each LUN");
/*
- * snic_slave_alloc : callback function to SCSI Mid Layer, called on
+ * snic_sdev_prep : callback function to SCSI Mid Layer, called on
* scsi device initialization.
*/
static int
-snic_slave_alloc(struct scsi_device *sdev)
+snic_sdev_prep(struct scsi_device *sdev)
{
struct snic_tgt *tgt = starget_to_tgt(scsi_target(sdev));
@@ -107,7 +107,7 @@ static const struct scsi_host_template snic_host_template = {
.eh_abort_handler = snic_abort_cmd,
.eh_device_reset_handler = snic_device_reset,
.eh_host_reset_handler = snic_host_reset,
- .slave_alloc = snic_slave_alloc,
+ .sdev_prep = snic_sdev_prep,
.slave_configure = snic_slave_configure,
.change_queue_depth = snic_change_queue_depth,
.this_id = -1,
@@ -1875,7 +1875,7 @@ static struct scsi_host_template scsi_driver = {
.eh_host_reset_handler = storvsc_host_reset_handler,
.proc_name = "storvsc_host",
.eh_timed_out = storvsc_eh_timed_out,
- .slave_alloc = storvsc_device_alloc,
+ .sdev_prep = storvsc_device_alloc,
.slave_configure = storvsc_device_configure,
.cmd_per_lun = 2048,
.this_id = -1,
@@ -765,7 +765,7 @@ static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags)
}
}
-static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
+static int sym53c8xx_sdev_prep(struct scsi_device *sdev)
{
struct sym_hcb *np = sym_get_hcb(sdev->host);
struct sym_tcb *tp = &np->target[sdev->id];
@@ -861,14 +861,14 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev)
return 0;
}
-static void sym53c8xx_slave_destroy(struct scsi_device *sdev)
+static void sym53c8xx_sdev_destroy(struct scsi_device *sdev)
{
struct sym_hcb *np = sym_get_hcb(sdev->host);
struct sym_tcb *tp = &np->target[sdev->id];
struct sym_lcb *lp = sym_lp(tp, sdev->lun);
unsigned long flags;
- /* if slave_alloc returned before allocating a sym_lcb, return */
+ /* if sdev_prep returned before allocating a sym_lcb, return */
if (!lp)
return;
@@ -1684,9 +1684,9 @@ static const struct scsi_host_template sym2_template = {
.info = sym53c8xx_info,
.cmd_size = sizeof(struct sym_ucmd),
.queuecommand = sym53c8xx_queue_command,
- .slave_alloc = sym53c8xx_slave_alloc,
+ .sdev_prep = sym53c8xx_sdev_prep,
.slave_configure = sym53c8xx_slave_configure,
- .slave_destroy = sym53c8xx_slave_destroy,
+ .sdev_destroy = sym53c8xx_sdev_destroy,
.eh_abort_handler = sym53c8xx_eh_abort_handler,
.eh_target_reset_handler = sym53c8xx_eh_target_reset_handler,
.eh_bus_reset_handler = sym53c8xx_eh_bus_reset_handler,
@@ -801,7 +801,7 @@ static const struct scsi_host_template virtscsi_host_template = {
.eh_abort_handler = virtscsi_abort,
.eh_device_reset_handler = virtscsi_device_reset,
.eh_timed_out = virtscsi_eh_timed_out,
- .slave_alloc = virtscsi_device_alloc,
+ .sdev_prep = virtscsi_device_alloc,
.dma_boundary = UINT_MAX,
.map_queues = virtscsi_map_queues,
@@ -777,7 +777,7 @@ static const struct scsi_host_template scsifront_sht = {
.eh_abort_handler = scsifront_eh_abort_handler,
.eh_device_reset_handler = scsifront_dev_reset_handler,
.slave_configure = scsifront_sdev_configure,
- .slave_destroy = scsifront_sdev_destroy,
+ .sdev_destroy = scsifront_sdev_destroy,
.cmd_per_lun = VSCSIIF_DEFAULT_CMD_PER_LUN,
.can_queue = VSCSIIF_MAX_REQS,
.this_id = -1,
@@ -1075,7 +1075,7 @@ static void scsifront_do_lun_hotplug(struct vscsifrnt_info *info, int op)
/*
* Front device state path, used in slave_configure called
- * on successfull scsi_add_device, and in slave_destroy called
+ * on successfull scsi_add_device, and in sdev_destroy called
* on remove of a device.
*/
snprintf(info->dev_state_path, sizeof(info->dev_state_path),
@@ -57,7 +57,7 @@ static const char *host_info(struct Scsi_Host *host)
return "SCSI emulation for PCI-Express Mass Storage devices";
}
-static int slave_alloc(struct scsi_device *sdev)
+static int sdev_prep(struct scsi_device *sdev)
{
/*
* Set the INQUIRY transfer length to 36. We don't use any of
@@ -198,7 +198,7 @@ static const struct scsi_host_template rtsx_host_template = {
/* unknown initiator id */
.this_id = -1,
- .slave_alloc = slave_alloc,
+ .sdev_prep = sdev_prep,
.slave_configure = slave_configure,
/* lots of sg segments can be handled */
@@ -5182,12 +5182,12 @@ static void ufshcd_lu_init(struct ufs_hba *hba, struct scsi_device *sdev)
}
/**
- * ufshcd_slave_alloc - handle initial SCSI device configurations
+ * ufshcd_sdev_prep - handle initial SCSI device configurations
* @sdev: pointer to SCSI device
*
* Return: success.
*/
-static int ufshcd_slave_alloc(struct scsi_device *sdev)
+static int ufshcd_sdev_prep(struct scsi_device *sdev)
{
struct ufs_hba *hba;
@@ -5265,10 +5265,10 @@ static int ufshcd_device_configure(struct scsi_device *sdev,
}
/**
- * ufshcd_slave_destroy - remove SCSI device configurations
+ * ufshcd_sdev_destroy - remove SCSI device configurations
* @sdev: pointer to SCSI device
*/
-static void ufshcd_slave_destroy(struct scsi_device *sdev)
+static void ufshcd_sdev_destroy(struct scsi_device *sdev)
{
struct ufs_hba *hba;
unsigned long flags;
@@ -8973,9 +8973,9 @@ static const struct scsi_host_template ufshcd_driver_template = {
.map_queues = ufshcd_map_queues,
.queuecommand = ufshcd_queuecommand,
.mq_poll = ufshcd_poll,
- .slave_alloc = ufshcd_slave_alloc,
+ .sdev_prep = ufshcd_sdev_prep,
.device_configure = ufshcd_device_configure,
- .slave_destroy = ufshcd_slave_destroy,
+ .sdev_destroy = ufshcd_sdev_destroy,
.change_queue_depth = ufshcd_change_queue_depth,
.eh_abort_handler = ufshcd_abort,
.eh_device_reset_handler = ufshcd_eh_device_reset_handler,
@@ -322,7 +322,7 @@ static inline void mts_urb_abort(struct mts_desc* desc) {
usb_kill_urb( desc->urb );
}
-static int mts_slave_alloc (struct scsi_device *s)
+static int mts_sdev_prep (struct scsi_device *s)
{
s->inquiry_len = 0x24;
return 0;
@@ -626,7 +626,7 @@ static const struct scsi_host_template mts_scsi_host_template = {
.this_id = -1,
.emulated = 1,
.dma_alignment = 511,
- .slave_alloc = mts_slave_alloc,
+ .sdev_prep = mts_sdev_prep,
.max_sectors= 256, /* 128 K */
};
@@ -64,7 +64,7 @@ static const char* host_info(struct Scsi_Host *host)
return us->scsi_name;
}
-static int slave_alloc (struct scsi_device *sdev)
+static int sdev_prep (struct scsi_device *sdev)
{
struct us_data *us = host_to_us(sdev->host);
@@ -127,7 +127,7 @@ static int device_configure(struct scsi_device *sdev, struct queue_limits *lim)
lim->max_hw_sectors, dma_max_mapping_size(dev) >> SECTOR_SHIFT);
/*
- * We can't put these settings in slave_alloc() because that gets
+ * We can't put these settings in sdev_prep() because that gets
* called before the device type is known. Consequently these
* settings can't be overridden via the scsi devinfo mechanism.
*/
@@ -637,7 +637,7 @@ static const struct scsi_host_template usb_stor_host_template = {
/* unknown initiator id */
.this_id = -1,
- .slave_alloc = slave_alloc,
+ .sdev_prep = sdev_prep,
.device_configure = device_configure,
.target_alloc = target_alloc,
@@ -817,7 +817,7 @@ static int uas_target_alloc(struct scsi_target *starget)
return 0;
}
-static int uas_slave_alloc(struct scsi_device *sdev)
+static int uas_sdev_prep(struct scsi_device *sdev)
{
struct uas_dev_info *devinfo =
(struct uas_dev_info *)sdev->host->hostdata;
@@ -905,7 +905,7 @@ static const struct scsi_host_template uas_host_template = {
.name = "uas",
.queuecommand = uas_queuecommand,
.target_alloc = uas_target_alloc,
- .slave_alloc = uas_slave_alloc,
+ .sdev_prep = uas_sdev_prep,
.device_configure = uas_device_configure,
.eh_abort_handler = uas_eh_abort_handler,
.eh_device_reset_handler = uas_eh_device_reset_handler,
@@ -1201,10 +1201,10 @@ extern int ata_std_bios_param(struct scsi_device *sdev,
struct block_device *bdev,
sector_t capacity, int geom[]);
extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
-extern int ata_scsi_slave_alloc(struct scsi_device *sdev);
+extern int ata_scsi_sdev_prep(struct scsi_device *sdev);
int ata_scsi_device_configure(struct scsi_device *sdev,
struct queue_limits *lim);
-extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
+extern void ata_scsi_sdev_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth);
extern int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
@@ -1460,8 +1460,8 @@ extern const struct attribute_group *ata_common_sdev_groups[];
.this_id = ATA_SHT_THIS_ID, \
.emulated = ATA_SHT_EMULATED, \
.proc_name = drv_name, \
- .slave_alloc = ata_scsi_slave_alloc, \
- .slave_destroy = ata_scsi_slave_destroy, \
+ .sdev_prep = ata_scsi_sdev_prep, \
+ .sdev_destroy = ata_scsi_sdev_destroy, \
.bios_param = ata_std_bios_param, \
.unlock_native_capacity = ata_scsi_unlock_native_capacity,\
.max_sectors = ATA_MAX_SECTORS_LBA48
@@ -963,7 +963,7 @@ int fc_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
int fc_eh_abort(struct scsi_cmnd *);
int fc_eh_device_reset(struct scsi_cmnd *);
int fc_eh_host_reset(struct scsi_cmnd *);
-int fc_slave_alloc(struct scsi_device *);
+int fc_sdev_prep(struct scsi_device *);
/*
* ELS/CT interface
@@ -703,7 +703,7 @@ int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
int sas_eh_target_reset_handler(struct scsi_cmnd *cmd);
extern void sas_target_destroy(struct scsi_target *);
-extern int sas_slave_alloc(struct scsi_device *);
+extern int sas_sdev_prep(struct scsi_device *);
extern int sas_ioctl(struct scsi_device *sdev, unsigned int cmd,
void __user *arg);
extern int sas_drain_work(struct sas_ha_struct *ha);
@@ -751,7 +751,7 @@ void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event,
#define LIBSAS_SHT_BASE _LIBSAS_SHT_BASE \
.device_configure = sas_device_configure, \
- .slave_alloc = sas_slave_alloc, \
+ .sdev_prep = sas_sdev_prep, \
#define LIBSAS_SHT_BASE_NO_SLAVE_INIT _LIBSAS_SHT_BASE
@@ -155,7 +155,7 @@ struct scsi_device {
blist_flags_t sdev_bflags; /* black/white flags as also found in
* scsi_devinfo.[hc]. For now used only to
- * pass settings from slave_alloc to scsi
+ * pass settings from sdev_prep to scsi
* core. */
unsigned int eh_timeout; /* Error handling timeout */
@@ -357,7 +357,7 @@ struct scsi_target {
atomic_t target_blocked;
/*
- * LLDs should set this in the slave_alloc host template callout.
+ * LLDs should set this in the sdev_prep host template callout.
* If set to zero then there is not limit.
*/
unsigned int can_queue;
@@ -168,20 +168,20 @@ struct scsi_host_template {
* Return values: 0 on success, non-0 on failure
*
* Deallocation: If we didn't find any devices at this ID, you will
- * get an immediate call to slave_destroy(). If we find something
+ * get an immediate call to sdev_destroy(). If we find something
* here then you will get a call to slave_configure(), then the
* device will be used for however long it is kept around, then when
* the device is removed from the system (or * possibly at reboot
- * time), you will then get a call to slave_destroy(). This is
- * assuming you implement slave_configure and slave_destroy.
+ * time), you will then get a call to sdev_destroy(). This is
+ * assuming you implement slave_configure and sdev_destroy.
* However, if you allocate memory and hang it off the device struct,
- * then you must implement the slave_destroy() routine at a minimum
+ * then you must implement the sdev_destroy() routine at a minimum
* in order to avoid leaking memory
* each time a device is tore down.
*
* Status: OPTIONAL
*/
- int (* slave_alloc)(struct scsi_device *);
+ int (* sdev_prep)(struct scsi_device *);
/*
* Once the device has responded to an INQUIRY and we know the
@@ -206,7 +206,7 @@ struct scsi_host_template {
* specific setup basis...
* 6. Return 0 on success, non-0 on error. The device will be marked
* as offline on error so that no access will occur. If you return
- * non-0, your slave_destroy routine will never get called for this
+ * non-0, your sdev_destroy routine will never get called for this
* device, so don't leave any loose memory hanging around, clean
* up after yourself before returning non-0
*
@@ -223,11 +223,11 @@ struct scsi_host_template {
* has ceased the mid layer calls this point so that the low level
* driver may completely detach itself from the scsi device and vice
* versa. The low level driver is responsible for freeing any memory
- * it allocated in the slave_alloc or slave_configure calls.
+ * it allocated in the sdev_prep or slave_configure calls.
*
* Status: OPTIONAL
*/
- void (* slave_destroy)(struct scsi_device *);
+ void (* sdev_destroy)(struct scsi_device *);
/*
* Before the mid layer attempts to scan for a new device attached
Rename .slave_alloc() into .sdev_prep() and .slave_destroy() into .sdev_destroy(). The new names make it clear that these are actions on SCSI devices. Make this change in the SCSI core, SCSI drivers and also in the ATA drivers. No functionality has been changed. This patch has been created as follows: * Change the text "slave_alloc" into "sdev_prep" in all source files except those in drivers/net. * Change the text "slave_destroy" into "sdev_destroy" in all source files except those in drivers/net. * Rename lpfc_no_slave() into lpfc_no_sdev(). * Manually adjust whitespace where necessary to restore vertical alignment (dc395x driver and include/linux/libata.h). Cc: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> --- drivers/ata/libata-scsi.c | 12 ++++++------ drivers/firewire/sbp2.c | 4 ++-- drivers/message/fusion/mptfc.c | 12 ++++++------ drivers/message/fusion/mptsas.c | 8 ++++---- drivers/message/fusion/mptscsih.c | 6 +++--- drivers/message/fusion/mptscsih.h | 2 +- drivers/message/fusion/mptspi.c | 12 ++++++------ drivers/s390/scsi/zfcp_scsi.c | 10 +++++----- drivers/s390/scsi/zfcp_sysfs.c | 2 +- drivers/s390/scsi/zfcp_unit.c | 2 +- drivers/scsi/53c700.c | 12 ++++++------ drivers/scsi/aic7xxx/aic79xx_osm.c | 4 ++-- drivers/scsi/aic7xxx/aic7xxx_osm.c | 4 ++-- drivers/scsi/bfa/bfad_im.c | 20 ++++++++++---------- drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 +- drivers/scsi/csiostor/csio_scsi.c | 12 ++++++------ drivers/scsi/dc395x.c | 12 ++++++------ drivers/scsi/esp_scsi.c | 8 ++++---- drivers/scsi/fcoe/fcoe.c | 2 +- drivers/scsi/fnic/fnic_main.c | 4 ++-- drivers/scsi/hisi_sas/hisi_sas.h | 2 +- drivers/scsi/hisi_sas/hisi_sas_main.c | 6 +++--- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +- drivers/scsi/hpsa.c | 12 ++++++------ drivers/scsi/ibmvscsi/ibmvfc.c | 6 +++--- drivers/scsi/ipr.c | 12 ++++++------ drivers/scsi/libfc/fc_fcp.c | 6 +++--- drivers/scsi/libsas/sas_scsi_host.c | 4 ++-- drivers/scsi/lpfc/lpfc_scsi.c | 22 +++++++++++----------- drivers/scsi/megaraid/megaraid_sas_base.c | 8 ++++---- drivers/scsi/mpi3mr/mpi3mr_os.c | 12 ++++++------ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 16 ++++++++-------- drivers/scsi/myrb.c | 16 ++++++++-------- drivers/scsi/myrs.c | 8 ++++---- drivers/scsi/ncr53c8xx.c | 4 ++-- drivers/scsi/pmcraid.c | 14 +++++++------- drivers/scsi/qla2xxx/qla_os.c | 8 ++++---- drivers/scsi/qla4xxx/ql4_os.c | 6 +++--- drivers/scsi/scsi_debug.c | 12 ++++++------ drivers/scsi/scsi_scan.c | 8 ++++---- drivers/scsi/scsi_sysfs.c | 4 ++-- drivers/scsi/smartpqi/smartpqi_init.c | 8 ++++---- drivers/scsi/snic/snic_main.c | 6 +++--- drivers/scsi/storvsc_drv.c | 2 +- drivers/scsi/sym53c8xx_2/sym_glue.c | 10 +++++----- drivers/scsi/virtio_scsi.c | 2 +- drivers/scsi/xen-scsifront.c | 4 ++-- drivers/staging/rts5208/rtsx.c | 4 ++-- drivers/ufs/core/ufshcd.c | 12 ++++++------ drivers/usb/image/microtek.c | 4 ++-- drivers/usb/storage/scsiglue.c | 6 +++--- drivers/usb/storage/uas.c | 4 ++-- include/linux/libata.h | 8 ++++---- include/scsi/libfc.h | 2 +- include/scsi/libsas.h | 4 ++-- include/scsi/scsi_device.h | 4 ++-- include/scsi/scsi_host.h | 16 ++++++++-------- 59 files changed, 219 insertions(+), 219 deletions(-)