diff mbox series

[v1,4/5] mpi3mr: Handling of fault code for insufficient power

Message ID 20241110194405.10108-5-ranjan.kumar@broadcom.com (mailing list archive)
State New
Headers show
Series mpi3mr: Few Enhancements and minor fixes | expand

Commit Message

Ranjan Kumar Nov. 10, 2024, 7:44 p.m. UTC 
During load, modified the driver to check and fail
before retrying the initialization for faults if
the fault code for the in-sufficient power. And also
modified the driver to check and mark the controller
as unrecoverable instead of issuing reset in the
watch dog timer if the fault code for the in-sufficient power.

Signed-off-by: Prayas Patel <prayas.patel@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
---
 drivers/scsi/mpi3mr/mpi3mr_fw.c | 40 +++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 2e6245bd4282..5ed31fe57474 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1035,6 +1035,36 @@  static const char *mpi3mr_reset_type_name(u16 reset_type)
 	return name;
 }
 
+/**
+ * mpi3mr_is_fault_recoverable - Read fault code and decide
+ * whether the controller can be recoverable
+ * @mrioc: Adapter instance reference
+ * Return: true if fault is recoverable, false otherwise.
+ */
+static inline bool mpi3mr_is_fault_recoverable(struct mpi3mr_ioc *mrioc)
+{
+	u32 fault;
+
+	fault = (readl(&mrioc->sysif_regs->fault) &
+		      MPI3_SYSIF_FAULT_CODE_MASK);
+
+	switch (fault) {
+	case MPI3_SYSIF_FAULT_CODE_COMPLETE_RESET_NEEDED:
+	case MPI3_SYSIF_FAULT_CODE_POWER_CYCLE_REQUIRED:
+		ioc_warn(mrioc,
+		    "controller requires system power cycle, marking controller as unrecoverable\n");
+		return false;
+	case MPI3_SYSIF_FAULT_CODE_INSUFFICIENT_PCI_SLOT_POWER:
+		ioc_warn(mrioc,
+		    "controller faulted due to insufficient power,\n"
+		    " try by connecting it to a different slot\n");
+		return false;
+	default:
+		break;
+	}
+	return true;
+}
+
 /**
  * mpi3mr_print_fault_info - Display fault information
  * @mrioc: Adapter instance reference
@@ -1373,6 +1403,11 @@  static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc)
 	ioc_info(mrioc, "ioc_status(0x%08x), ioc_config(0x%08x), ioc_info(0x%016llx) at the bringup\n",
 	    ioc_status, ioc_config, base_info);
 
+	if (!mpi3mr_is_fault_recoverable(mrioc)) {
+		mrioc->unrecoverable = 1;
+		goto out_device_not_present;
+	}
+
 	/*The timeout value is in 2sec unit, changing it to seconds*/
 	mrioc->ready_timeout =
 	    ((base_info & MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK) >>
@@ -2734,6 +2769,11 @@  static void mpi3mr_watchdog_work(struct work_struct *work)
 	mpi3mr_print_fault_info(mrioc);
 	mrioc->diagsave_timeout = 0;
 
+	if (!mpi3mr_is_fault_recoverable(mrioc)) {
+		mrioc->unrecoverable = 1;
+		goto schedule_work;
+	}
+
 	switch (trigger_data.fault) {
 	case MPI3_SYSIF_FAULT_CODE_COMPLETE_RESET_NEEDED:
 	case MPI3_SYSIF_FAULT_CODE_POWER_CYCLE_REQUIRED: