diff mbox series

scsi: isci: static most module parameters

Message ID 20250309145044.38586-1-linux@treblig.org (mailing list archive)
State Under Review
Headers show
Series scsi: isci: static most module parameters | expand

Commit Message

Dr. David Alan Gilbert March 9, 2025, 2:50 p.m. UTC 
From: "Dr. David Alan Gilbert" <linux@treblig.org>

Most of the module parameters are only used locally in the same
C file; so static them.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
---
 drivers/scsi/isci/init.c | 14 +++++++-------
 drivers/scsi/isci/isci.h |  7 -------
 2 files changed, 7 insertions(+), 14 deletions(-)

Comments

Damien Le Moal March 10, 2025, 12:05 a.m. UTC | #1 
On 3/9/25 23:50, linux@treblig.org wrote:
> From: "Dr. David Alan Gilbert" <linux@treblig.org>
> 
> Most of the module parameters are only used locally in the same
> C file; so static them.
> 
> Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Martin K. Petersen March 11, 2025, 1:13 a.m. UTC | #2 
> Most of the module parameters are only used locally in the same C
> file; so static them.
>

Applied to 6.15/scsi-staging, thanks!
diff mbox series

Patch

diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 73085d2f5c43..acf0c2038d20 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -91,31 +91,31 @@  MODULE_DEVICE_TABLE(pci, isci_id_table);
 
 /* linux isci specific settings */
 
-unsigned char no_outbound_task_to = 2;
+static unsigned char no_outbound_task_to = 2;
 module_param(no_outbound_task_to, byte, 0);
 MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)");
 
-u16 ssp_max_occ_to = 20;
+static u16 ssp_max_occ_to = 20;
 module_param(ssp_max_occ_to, ushort, 0);
 MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)");
 
-u16 stp_max_occ_to = 5;
+static u16 stp_max_occ_to = 5;
 module_param(stp_max_occ_to, ushort, 0);
 MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)");
 
-u16 ssp_inactive_to = 5;
+static u16 ssp_inactive_to = 5;
 module_param(ssp_inactive_to, ushort, 0);
 MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)");
 
-u16 stp_inactive_to = 5;
+static u16 stp_inactive_to = 5;
 module_param(stp_inactive_to, ushort, 0);
 MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)");
 
-unsigned char phy_gen = SCIC_SDS_PARM_GEN2_SPEED;
+static unsigned char phy_gen = SCIC_SDS_PARM_GEN2_SPEED;
 module_param(phy_gen, byte, 0);
 MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
 
-unsigned char max_concurr_spinup;
+static unsigned char max_concurr_spinup;
 module_param(max_concurr_spinup, byte, 0);
 MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
 
diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h
index 4e6b1decbca7..f6a8fe206415 100644
--- a/drivers/scsi/isci/isci.h
+++ b/drivers/scsi/isci/isci.h
@@ -473,13 +473,6 @@  static inline void sci_swab32_cpy(void *_dest, void *_src, ssize_t word_cnt)
 		dest[word_cnt] = swab32(src[word_cnt]);
 }
 
-extern unsigned char no_outbound_task_to;
-extern u16 ssp_max_occ_to;
-extern u16 stp_max_occ_to;
-extern u16 ssp_inactive_to;
-extern u16 stp_inactive_to;
-extern unsigned char phy_gen;
-extern unsigned char max_concurr_spinup;
 extern uint cable_selection_override;
 
 irqreturn_t isci_msix_isr(int vec, void *data);