@@ -1045,13 +1045,12 @@ static void cdrom_count_tracks(struct cdrom_device_info *cdi, tracktype *tracks)
tracks->cdi, tracks->xa);
}
-static
-int open_for_data(struct cdrom_device_info *cdi)
+static int open_for_common(struct cdrom_device_info *cdi, tracktype *tracks)
{
int ret;
const struct cdrom_device_ops *cdo = cdi->ops;
- tracktype tracks;
- cd_dbg(CD_OPEN, "entering open_for_data\n");
+
+ cd_dbg(CD_OPEN, "entering open_for_common\n");
/* Check if the driver can report drive status. If it can, we
can do clever things. If it can't, well, we at least tried! */
if (cdo->drive_status != NULL) {
@@ -1059,49 +1058,48 @@ int open_for_data(struct cdrom_device_info *cdi)
cd_dbg(CD_OPEN, "drive_status=%d\n", ret);
if (ret == CDS_TRAY_OPEN) {
cd_dbg(CD_OPEN, "the tray is open...\n");
- /* can/may i close it? */
- if (CDROM_CAN(CDC_CLOSE_TRAY) &&
- cdi->options & CDO_AUTO_CLOSE) {
+ if (CDROM_CAN(CDC_CLOSE_TRAY)) {
+ if (!(cdi->options & CDO_AUTO_CLOSE))
+ return -ENOMEDIUM;
cd_dbg(CD_OPEN, "trying to close the tray\n");
ret=cdo->tray_move(cdi,0);
if (ret) {
cd_dbg(CD_OPEN, "bummer. tried to close the tray but failed.\n");
- /* Ignore the error from the low
- level driver. We don't care why it
- couldn't close the tray. We only care
- that there is no disc in the drive,
- since that is the _REAL_ problem here.*/
- ret=-ENOMEDIUM;
- goto clean_up_and_return;
+ return -ENOMEDIUM;
}
+ ret = cdo->drive_status(cdi, CDSL_CURRENT);
+ if (ret == CDS_TRAY_OPEN)
+ cd_dbg(CD_OPEN, "bummer. the tray is still not closed.\n");
+ if (ret == CDS_NO_DISC)
+ cd_dbg(CD_OPEN, "tray might not contain a medium\n");
} else {
cd_dbg(CD_OPEN, "bummer. this drive can't close the tray.\n");
- ret=-ENOMEDIUM;
- goto clean_up_and_return;
- }
- /* Ok, the door should be closed now.. Check again */
- ret = cdo->drive_status(cdi, CDSL_CURRENT);
- if ((ret == CDS_NO_DISC) || (ret==CDS_TRAY_OPEN)) {
- cd_dbg(CD_OPEN, "bummer. the tray is still not closed.\n");
- cd_dbg(CD_OPEN, "tray might not contain a medium\n");
- ret=-ENOMEDIUM;
- goto clean_up_and_return;
+ return -ENOMEDIUM;
}
- cd_dbg(CD_OPEN, "the tray is now closed\n");
- }
- /* the door should be closed now, check for the disc */
- ret = cdo->drive_status(cdi, CDSL_CURRENT);
- if (ret!=CDS_DISC_OK) {
- ret = -ENOMEDIUM;
- goto clean_up_and_return;
}
+ if (ret != CDS_DISC_OK)
+ return -ENOMEDIUM;
}
- cdrom_count_tracks(cdi, &tracks);
- if (tracks.error == CDS_NO_DISC) {
+ cdrom_count_tracks(cdi, tracks);
+ if (tracks->error == CDS_NO_DISC) {
cd_dbg(CD_OPEN, "bummer. no disc.\n");
- ret=-ENOMEDIUM;
- goto clean_up_and_return;
+ return -ENOMEDIUM;
}
+
+ return 0;
+}
+
+static int open_for_data(struct cdrom_device_info *cdi)
+{
+ int ret;
+ const struct cdrom_device_ops *cdo = cdi->ops;
+ tracktype tracks;
+
+ cd_dbg(CD_OPEN, "entering open_for_data\n");
+ ret = open_for_common(cdi, &tracks);
+ if (ret)
+ goto clean_up_and_return;
+
/* CD-Players which don't use O_NONBLOCK, workman
* for example, need bit CDO_CHECK_TYPE cleared! */
if (tracks.data==0) {
@@ -1208,53 +1206,17 @@ int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev,
/* This code is similar to that in open_for_data. The routine is called
whenever an audio play operation is requested.
*/
-static int check_for_audio_disc(struct cdrom_device_info *cdi,
- const struct cdrom_device_ops *cdo)
+static int check_for_audio_disc(struct cdrom_device_info *cdi)
{
int ret;
tracktype tracks;
cd_dbg(CD_OPEN, "entering check_for_audio_disc\n");
if (!(cdi->options & CDO_CHECK_TYPE))
return 0;
- if (cdo->drive_status != NULL) {
- ret = cdo->drive_status(cdi, CDSL_CURRENT);
- cd_dbg(CD_OPEN, "drive_status=%d\n", ret);
- if (ret == CDS_TRAY_OPEN) {
- cd_dbg(CD_OPEN, "the tray is open...\n");
- /* can/may i close it? */
- if (CDROM_CAN(CDC_CLOSE_TRAY) &&
- cdi->options & CDO_AUTO_CLOSE) {
- cd_dbg(CD_OPEN, "trying to close the tray\n");
- ret=cdo->tray_move(cdi,0);
- if (ret) {
- cd_dbg(CD_OPEN, "bummer. tried to close tray but failed.\n");
- /* Ignore the error from the low
- level driver. We don't care why it
- couldn't close the tray. We only care
- that there is no disc in the drive,
- since that is the _REAL_ problem here.*/
- return -ENOMEDIUM;
- }
- } else {
- cd_dbg(CD_OPEN, "bummer. this driver can't close the tray.\n");
- return -ENOMEDIUM;
- }
- /* Ok, the door should be closed now.. Check again */
- ret = cdo->drive_status(cdi, CDSL_CURRENT);
- if ((ret == CDS_NO_DISC) || (ret==CDS_TRAY_OPEN)) {
- cd_dbg(CD_OPEN, "bummer. the tray is still not closed.\n");
- return -ENOMEDIUM;
- }
- if (ret!=CDS_DISC_OK) {
- cd_dbg(CD_OPEN, "bummer. disc isn't ready.\n");
- return -EIO;
- }
- cd_dbg(CD_OPEN, "the tray is now closed\n");
- }
- }
- cdrom_count_tracks(cdi, &tracks);
- if (tracks.error)
- return(tracks.error);
+
+ ret = open_for_common(cdi, &tracks);
+ if (ret)
+ return ret;
if (tracks.audio==0)
return -EMEDIUMTYPE;
@@ -2725,7 +2687,7 @@ static int cdrom_ioctl_play_trkind(struct cdrom_device_info *cdi,
if (copy_from_user(&ti, argp, sizeof(ti)))
return -EFAULT;
- ret = check_for_audio_disc(cdi, cdi->ops);
+ ret = check_for_audio_disc(cdi);
if (ret)
return ret;
return cdi->ops->audio_ioctl(cdi, CDROMPLAYTRKIND, &ti);
@@ -2773,7 +2735,7 @@ static int cdrom_ioctl_audioctl(struct cdrom_device_info *cdi,
if (!CDROM_CAN(CDC_PLAY_AUDIO))
return -ENOSYS;
- ret = check_for_audio_disc(cdi, cdi->ops);
+ ret = check_for_audio_disc(cdi);
if (ret)
return ret;
return cdi->ops->audio_ioctl(cdi, cmd, NULL);
The open_for_audio and open_for_data copies are bitrotten in different ways already and will need to update the autoclose logic in both. Signed-off-by: Michal Suchanek <msuchanek@suse.de> --- v2: do not add unrelated whitespace changes v3: fix declaration style v4: fix the debug message logic around closing tray --- drivers/cdrom/cdrom.c | 118 ++++++++++++++---------------------------- 1 file changed, 40 insertions(+), 78 deletions(-)