@@ -42,6 +42,9 @@ config SCSI_DMA
bool
default n
+config SCSI_ESP_PIO
+ bool
+
config SCSI_NETLINK
bool
default n
@@ -1355,6 +1358,7 @@ config SCSI_ZORRO_ESP
tristate "Zorro ESP SCSI support"
depends on ZORRO && SCSI
select SCSI_SPI_ATTRS
+ select SCSI_ESP_PIO
help
Support for various NCR53C9x (ESP) based SCSI controllers on Zorro
expansion boards for the Amiga.
@@ -1397,6 +1401,7 @@ config SCSI_MAC_ESP
tristate "Macintosh NCR53c9[46] SCSI"
depends on MAC && SCSI
select SCSI_SPI_ATTRS
+ select SCSI_ESP_PIO
help
This is the NCR 53c9x SCSI controller found on most of the 68040
based Macintoshes.
@@ -2771,3 +2771,131 @@ MODULE_PARM_DESC(esp_debug,
module_init(esp_init);
module_exit(esp_exit);
+
+#ifdef CONFIG_SCSI_ESP_PIO
+static inline unsigned int esp_wait_for_fifo(struct esp *esp)
+{
+ int i = 500000;
+
+ do {
+ unsigned int fbytes = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES;
+
+ if (fbytes)
+ return fbytes;
+
+ udelay(2);
+ } while (--i);
+
+ shost_printk(KERN_ERR, esp->host, "FIFO is empty. sreg [%02x]\n",
+ esp_read8(ESP_STATUS));
+ return 0;
+}
+
+static inline int esp_wait_for_intr(struct esp *esp)
+{
+ int i = 500000;
+
+ do {
+ esp->sreg = esp_read8(ESP_STATUS);
+ if (esp->sreg & ESP_STAT_INTR)
+ return 0;
+
+ udelay(2);
+ } while (--i);
+
+ shost_printk(KERN_ERR, esp->host, "IRQ timeout. sreg [%02x]\n",
+ esp->sreg);
+ return 1;
+}
+
+#define ESP_FIFO_SIZE 16
+
+void esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count,
+ u32 dma_count, int write, u8 cmd)
+{
+ u8 phase = esp->sreg & ESP_STAT_PMASK;
+
+ cmd &= ~ESP_CMD_DMA;
+ esp->send_cmd_error = 0;
+
+ if (write) {
+ u8 *dst = (u8 *)addr;
+ u8 mask = ~(phase == ESP_MIP ? ESP_INTR_FDONE : ESP_INTR_BSERV);
+
+ scsi_esp_cmd(esp, cmd);
+
+ while (1) {
+ if (!esp_wait_for_fifo(esp))
+ break;
+
+ *dst++ = esp_read8(ESP_FDATA);
+ --esp_count;
+
+ if (!esp_count)
+ break;
+
+ if (esp_wait_for_intr(esp)) {
+ esp->send_cmd_error = 1;
+ break;
+ }
+
+ if ((esp->sreg & ESP_STAT_PMASK) != phase)
+ break;
+
+ esp->ireg = esp_read8(ESP_INTRPT);
+ if (esp->ireg & mask) {
+ esp->send_cmd_error = 1;
+ break;
+ }
+
+ if (phase == ESP_MIP)
+ scsi_esp_cmd(esp, ESP_CMD_MOK);
+
+ scsi_esp_cmd(esp, ESP_CMD_TI);
+ }
+ } else {
+ unsigned int n = ESP_FIFO_SIZE;
+ u8 *src = (u8 *)addr;
+
+ scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+
+ if (n > esp_count)
+ n = esp_count;
+ writesb(esp->fifo_reg, src, n);
+ src += n;
+ esp_count -= n;
+
+ scsi_esp_cmd(esp, cmd);
+
+ while (esp_count) {
+ if (esp_wait_for_intr(esp)) {
+ esp->send_cmd_error = 1;
+ break;
+ }
+
+ if ((esp->sreg & ESP_STAT_PMASK) != phase)
+ break;
+
+ esp->ireg = esp_read8(ESP_INTRPT);
+ if (esp->ireg & ~ESP_INTR_BSERV) {
+ esp->send_cmd_error = 1;
+ break;
+ }
+
+ n = ESP_FIFO_SIZE -
+ (esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES);
+
+ if (n > esp_count)
+ n = esp_count;
+ writesb(esp->fifo_reg, src, n);
+ src += n;
+ esp_count -= n;
+
+ scsi_esp_cmd(esp, ESP_CMD_TI);
+ }
+ }
+
+ esp->send_cmd_residual = esp_count;
+}
+EXPORT_SYMBOL(esp_send_pio_cmd);
+#endif
@@ -540,6 +540,9 @@ struct esp {
void *dma;
int dmarev;
+ /* These are used by esp_send_pio_cmd() */
+ u8 __iomem *fifo_reg;
+ int send_cmd_error;
u32 send_cmd_residual;
};
@@ -581,4 +584,7 @@ extern void scsi_esp_unregister(struct esp *);
extern irqreturn_t scsi_esp_intr(int, void *);
extern void scsi_esp_cmd(struct esp *, u8);
+extern void esp_send_pio_cmd(struct esp *esp, u32 dma_addr, u32 esp_count,
+ u32 dma_count, int write, u8 cmd);
+
#endif /* !(_ESP_SCSI_H) */
@@ -52,7 +52,6 @@ struct mac_esp_priv {
struct esp *esp;
void __iomem *pdma_regs;
void __iomem *pdma_io;
- int error;
};
static struct esp *esp_chips[2];
static DEFINE_SPINLOCK(esp_chips_lock);
@@ -120,12 +119,11 @@ static void mac_esp_dma_invalidate(struct esp *esp)
static int mac_esp_dma_error(struct esp *esp)
{
- return MAC_ESP_GET_PRIV(esp)->error;
+ return esp->send_cmd_error;
}
static inline int mac_esp_wait_for_empty_fifo(struct esp *esp)
{
- struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
int i = 500000;
do {
@@ -140,7 +138,7 @@ static inline int mac_esp_wait_for_empty_fifo(struct esp *esp)
printk(KERN_ERR PFX "FIFO is not empty (sreg %02x)\n",
esp_read8(ESP_STATUS));
- mep->error = 1;
+ esp->send_cmd_error = 1;
return 1;
}
@@ -166,7 +164,7 @@ static inline int mac_esp_wait_for_dreq(struct esp *esp)
printk(KERN_ERR PFX "PDMA timeout (sreg %02x)\n",
esp_read8(ESP_STATUS));
- mep->error = 1;
+ esp->send_cmd_error = 1;
return 1;
}
@@ -233,7 +231,7 @@ static void mac_esp_send_pdma_cmd(struct esp *esp, u32 addr, u32 esp_count,
{
struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
- mep->error = 0;
+ esp->send_cmd_error = 0;
if (!write)
scsi_esp_cmd(esp, ESP_CMD_FLUSH);
@@ -271,166 +269,6 @@ static void mac_esp_send_pdma_cmd(struct esp *esp, u32 addr, u32 esp_count,
} while (esp_count);
}
-/*
- * Programmed IO routines follow.
- */
-
-static inline unsigned int mac_esp_wait_for_fifo(struct esp *esp)
-{
- int i = 500000;
-
- do {
- unsigned int fbytes = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES;
-
- if (fbytes)
- return fbytes;
-
- udelay(2);
- } while (--i);
-
- printk(KERN_ERR PFX "FIFO is empty (sreg %02x)\n",
- esp_read8(ESP_STATUS));
- return 0;
-}
-
-static inline int mac_esp_wait_for_intr(struct esp *esp)
-{
- struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
- int i = 500000;
-
- do {
- esp->sreg = esp_read8(ESP_STATUS);
- if (esp->sreg & ESP_STAT_INTR)
- return 0;
-
- udelay(2);
- } while (--i);
-
- printk(KERN_ERR PFX "IRQ timeout (sreg %02x)\n", esp->sreg);
- mep->error = 1;
- return 1;
-}
-
-#define MAC_ESP_PIO_LOOP(operands, reg1) \
- asm volatile ( \
- "1: moveb " operands " \n" \
- " subqw #1,%1 \n" \
- " jbne 1b \n" \
- : "+a" (addr), "+r" (reg1) \
- : "a" (fifo))
-
-#define MAC_ESP_PIO_FILL(operands, reg1) \
- asm volatile ( \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " moveb " operands " \n" \
- " subqw #8,%1 \n" \
- " subqw #8,%1 \n" \
- : "+a" (addr), "+r" (reg1) \
- : "a" (fifo))
-
-#define MAC_ESP_FIFO_SIZE 16
-
-static void mac_esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count,
- u32 dma_count, int write, u8 cmd)
-{
- struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
- u8 __iomem *fifo = esp->regs + ESP_FDATA * 16;
- u8 phase = esp->sreg & ESP_STAT_PMASK;
-
- cmd &= ~ESP_CMD_DMA;
- mep->error = 0;
-
- if (write) {
- u8 *dst = (u8 *)addr;
- u8 mask = ~(phase == ESP_MIP ? ESP_INTR_FDONE : ESP_INTR_BSERV);
-
- scsi_esp_cmd(esp, cmd);
-
- while (1) {
- if (!mac_esp_wait_for_fifo(esp))
- break;
-
- *dst++ = esp_read8(ESP_FDATA);
- --esp_count;
-
- if (!esp_count)
- break;
-
- if (mac_esp_wait_for_intr(esp))
- break;
-
- if ((esp->sreg & ESP_STAT_PMASK) != phase)
- break;
-
- esp->ireg = esp_read8(ESP_INTRPT);
- if (esp->ireg & mask) {
- mep->error = 1;
- break;
- }
-
- if (phase == ESP_MIP)
- scsi_esp_cmd(esp, ESP_CMD_MOK);
-
- scsi_esp_cmd(esp, ESP_CMD_TI);
- }
- } else {
- scsi_esp_cmd(esp, ESP_CMD_FLUSH);
-
- if (esp_count >= MAC_ESP_FIFO_SIZE)
- MAC_ESP_PIO_FILL("%0@+,%2@", esp_count);
- else
- MAC_ESP_PIO_LOOP("%0@+,%2@", esp_count);
-
- scsi_esp_cmd(esp, cmd);
-
- while (esp_count) {
- unsigned int n;
-
- if (mac_esp_wait_for_intr(esp))
- break;
-
- if ((esp->sreg & ESP_STAT_PMASK) != phase)
- break;
-
- esp->ireg = esp_read8(ESP_INTRPT);
- if (esp->ireg & ~ESP_INTR_BSERV) {
- mep->error = 1;
- break;
- }
-
- n = MAC_ESP_FIFO_SIZE -
- (esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES);
- if (n > esp_count)
- n = esp_count;
-
- if (n == MAC_ESP_FIFO_SIZE) {
- MAC_ESP_PIO_FILL("%0@+,%2@", esp_count);
- } else {
- esp_count -= n;
- MAC_ESP_PIO_LOOP("%0@+,%2@", n);
- }
-
- scsi_esp_cmd(esp, ESP_CMD_TI);
- }
- }
-
- esp->send_cmd_residual = esp_count;
-}
-
static int mac_esp_irq_pending(struct esp *esp)
{
if (esp_read8(ESP_STATUS) & ESP_STAT_INTR)
@@ -553,6 +391,7 @@ static int esp_mac_probe(struct platform_device *dev)
mep->pdma_regs = NULL;
break;
}
+ esp->fifo_reg = esp->regs + ESP_FDATA * 16;
esp->ops = &mac_esp_ops;
if (mep->pdma_io == NULL) {
@@ -560,7 +399,7 @@ static int esp_mac_probe(struct platform_device *dev)
esp_write8(0, ESP_TCLOW);
esp_write8(0, ESP_TCMED);
esp->flags = ESP_FLAG_DISABLE_SYNC;
- mac_esp_ops.send_dma_cmd = mac_esp_send_pio_cmd;
+ mac_esp_ops.send_dma_cmd = esp_send_pio_cmd;
} else {
printk(KERN_INFO PFX "using PDMA for controller %d\n", dev->id);
}
@@ -9,8 +9,6 @@
*
* Copyright (C) 2013 Tuomas Vainikka (tuomas.vainikka@aalto.fi) for
* Blizzard 1230 DMA and probe function fixes
- *
- * Copyright (C) 2017 Finn Thain for PIO code from Mac ESP driver adapted here
*/
/*
* ZORRO bus code from:
@@ -159,7 +157,6 @@ struct fastlane_dma_registers {
struct zorro_esp_priv {
struct esp *esp; /* our ESP instance - for Scsi_host* */
void __iomem *board_base; /* virtual address (Zorro III board) */
- int error; /* PIO error flag */
int zorro3; /* board is Zorro III */
unsigned char ctrl_data; /* shadow copy of ctrl_reg */
};
@@ -274,192 +271,29 @@ static void fastlane_esp_dma_invalidate(struct esp *esp)
z_writel(0, zep->board_base);
}
-/*
- * Programmed IO routines follow.
- */
-
-static inline unsigned int zorro_esp_wait_for_fifo(struct esp *esp)
-{
- int i = 500000;
-
- do {
- unsigned int fbytes = zorro_esp_read8(esp, ESP_FFLAGS)
- & ESP_FF_FBYTES;
-
- if (fbytes)
- return fbytes;
-
- udelay(2);
- } while (--i);
-
- pr_err("FIFO is empty (sreg %02x)\n",
- zorro_esp_read8(esp, ESP_STATUS));
- return 0;
-}
-
-static inline int zorro_esp_wait_for_intr(struct esp *esp)
-{
- struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev);
- int i = 500000;
-
- do {
- esp->sreg = zorro_esp_read8(esp, ESP_STATUS);
- if (esp->sreg & ESP_STAT_INTR)
- return 0;
-
- udelay(2);
- } while (--i);
-
- pr_err("IRQ timeout (sreg %02x)\n", esp->sreg);
- zep->error = 1;
- return 1;
-}
-
-/*
- * PIO macros as used in mac_esp.c.
- * Note that addr and fifo arguments are local-scope variables declared
- * in zorro_esp_send_pio_cmd(), the macros are only used in that function,
- * and addr and fifo are referenced in each use of the macros so there
- * is no need to pass them as macro parameters.
- */
-#define ZORRO_ESP_PIO_LOOP(operands, reg1) \
- asm volatile ( \
- "1: moveb " operands "\n" \
- " subqw #1,%1 \n" \
- " jbne 1b \n" \
- : "+a" (addr), "+r" (reg1) \
- : "a" (fifo));
-
-#define ZORRO_ESP_PIO_FILL(operands, reg1) \
- asm volatile ( \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " moveb " operands "\n" \
- " subqw #8,%1 \n" \
- " subqw #8,%1 \n" \
- : "+a" (addr), "+r" (reg1) \
- : "a" (fifo));
-
-#define ZORRO_ESP_FIFO_SIZE 16
-
-static void zorro_esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count,
- u32 dma_count, int write, u8 cmd)
-{
- struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev);
- u8 __iomem *fifo = esp->regs + ESP_FDATA * 16;
- u8 phase = esp->sreg & ESP_STAT_PMASK;
-
- cmd &= ~ESP_CMD_DMA;
-
- if (write) {
- u8 *dst = (u8 *)addr;
- u8 mask = ~(phase == ESP_MIP ? ESP_INTR_FDONE : ESP_INTR_BSERV);
-
- scsi_esp_cmd(esp, cmd);
-
- while (1) {
- if (!zorro_esp_wait_for_fifo(esp))
- break;
-
- *dst++ = zorro_esp_read8(esp, ESP_FDATA);
- --esp_count;
-
- if (!esp_count)
- break;
-
- if (zorro_esp_wait_for_intr(esp))
- break;
-
- if ((esp->sreg & ESP_STAT_PMASK) != phase)
- break;
-
- esp->ireg = zorro_esp_read8(esp, ESP_INTRPT);
- if (esp->ireg & mask) {
- zep->error = 1;
- break;
- }
-
- if (phase == ESP_MIP)
- scsi_esp_cmd(esp, ESP_CMD_MOK);
-
- scsi_esp_cmd(esp, ESP_CMD_TI);
- }
- } else { /* unused, as long as we only handle MIP here */
- scsi_esp_cmd(esp, ESP_CMD_FLUSH);
-
- if (esp_count >= ZORRO_ESP_FIFO_SIZE)
- ZORRO_ESP_PIO_FILL("%0@+,%2@", esp_count)
- else
- ZORRO_ESP_PIO_LOOP("%0@+,%2@", esp_count)
-
- scsi_esp_cmd(esp, cmd);
-
- while (esp_count) {
- unsigned int n;
-
- if (zorro_esp_wait_for_intr(esp))
- break;
-
- if ((esp->sreg & ESP_STAT_PMASK) != phase)
- break;
-
- esp->ireg = zorro_esp_read8(esp, ESP_INTRPT);
- if (esp->ireg & ~ESP_INTR_BSERV) {
- zep->error = 1;
- break;
- }
-
- n = ZORRO_ESP_FIFO_SIZE -
- (zorro_esp_read8(esp, ESP_FFLAGS) & ESP_FF_FBYTES);
- if (n > esp_count)
- n = esp_count;
-
- if (n == ZORRO_ESP_FIFO_SIZE)
- ZORRO_ESP_PIO_FILL("%0@+,%2@", esp_count)
- else {
- esp_count -= n;
- ZORRO_ESP_PIO_LOOP("%0@+,%2@", n)
- }
-
- scsi_esp_cmd(esp, ESP_CMD_TI);
- }
- }
-}
-
/* Blizzard 1230/60 SCSI-IV DMA */
static void zorro_esp_send_blz1230_dma_cmd(struct esp *esp, u32 addr,
u32 esp_count, u32 dma_count, int write, u8 cmd)
{
- struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev);
struct blz1230_dma_registers __iomem *dregs = esp->dma_regs;
u8 phase = esp->sreg & ESP_STAT_PMASK;
- zep->error = 0;
/*
* Use PIO if transferring message bytes to esp->command_block_dma.
* PIO requires a virtual address, so substitute esp->command_block
* for addr.
*/
if (phase == ESP_MIP && addr == esp->command_block_dma) {
- zorro_esp_send_pio_cmd(esp, (u32) esp->command_block,
- esp_count, dma_count, write, cmd);
+ esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
+ dma_count, write, cmd);
return;
}
+ /* Clear the results of a possible prior esp->ops->send_dma_cmd() */
+ esp->send_cmd_error = 0;
+ esp->send_cmd_residual = 0;
+
if (write)
/* DMA receive */
dma_sync_single_for_device(esp->dev, addr, esp_count,
@@ -493,18 +327,19 @@ static void zorro_esp_send_blz1230_dma_cmd(struct esp *esp, u32 addr,
static void zorro_esp_send_blz1230II_dma_cmd(struct esp *esp, u32 addr,
u32 esp_count, u32 dma_count, int write, u8 cmd)
{
- struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev);
struct blz1230II_dma_registers __iomem *dregs = esp->dma_regs;
u8 phase = esp->sreg & ESP_STAT_PMASK;
- zep->error = 0;
/* Use PIO if transferring message bytes to esp->command_block_dma */
if (phase == ESP_MIP && addr == esp->command_block_dma) {
- zorro_esp_send_pio_cmd(esp, (u32) esp->command_block,
- esp_count, dma_count, write, cmd);
+ esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
+ dma_count, write, cmd);
return;
}
+ esp->send_cmd_error = 0;
+ esp->send_cmd_residual = 0;
+
if (write)
/* DMA receive */
dma_sync_single_for_device(esp->dev, addr, esp_count,
@@ -537,18 +372,19 @@ static void zorro_esp_send_blz1230II_dma_cmd(struct esp *esp, u32 addr,
static void zorro_esp_send_blz2060_dma_cmd(struct esp *esp, u32 addr,
u32 esp_count, u32 dma_count, int write, u8 cmd)
{
- struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev);
struct blz2060_dma_registers __iomem *dregs = esp->dma_regs;
u8 phase = esp->sreg & ESP_STAT_PMASK;
- zep->error = 0;
/* Use PIO if transferring message bytes to esp->command_block_dma */
if (phase == ESP_MIP && addr == esp->command_block_dma) {
- zorro_esp_send_pio_cmd(esp, (u32) esp->command_block,
- esp_count, dma_count, write, cmd);
+ esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
+ dma_count, write, cmd);
return;
}
+ esp->send_cmd_error = 0;
+ esp->send_cmd_residual = 0;
+
if (write)
/* DMA receive */
dma_sync_single_for_device(esp->dev, addr, esp_count,
@@ -586,14 +422,16 @@ static void zorro_esp_send_cyber_dma_cmd(struct esp *esp, u32 addr,
u8 phase = esp->sreg & ESP_STAT_PMASK;
unsigned char *ctrl_data = &zep->ctrl_data;
- zep->error = 0;
/* Use PIO if transferring message bytes to esp->command_block_dma */
if (phase == ESP_MIP && addr == esp->command_block_dma) {
- zorro_esp_send_pio_cmd(esp, (u32) esp->command_block,
- esp_count, dma_count, write, cmd);
+ esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
+ dma_count, write, cmd);
return;
}
+ esp->send_cmd_error = 0;
+ esp->send_cmd_residual = 0;
+
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
@@ -631,18 +469,19 @@ static void zorro_esp_send_cyber_dma_cmd(struct esp *esp, u32 addr,
static void zorro_esp_send_cyberII_dma_cmd(struct esp *esp, u32 addr,
u32 esp_count, u32 dma_count, int write, u8 cmd)
{
- struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev);
struct cyberII_dma_registers __iomem *dregs = esp->dma_regs;
u8 phase = esp->sreg & ESP_STAT_PMASK;
- zep->error = 0;
/* Use PIO if transferring message bytes to esp->command_block_dma */
if (phase == ESP_MIP && addr == esp->command_block_dma) {
- zorro_esp_send_pio_cmd(esp, (u32) esp->command_block,
- esp_count, dma_count, write, cmd);
+ esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
+ dma_count, write, cmd);
return;
}
+ esp->send_cmd_error = 0;
+ esp->send_cmd_residual = 0;
+
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
@@ -676,14 +515,16 @@ static void zorro_esp_send_fastlane_dma_cmd(struct esp *esp, u32 addr,
u8 phase = esp->sreg & ESP_STAT_PMASK;
unsigned char *ctrl_data = &zep->ctrl_data;
- zep->error = 0;
/* Use PIO if transferring message bytes to esp->command_block_dma */
if (phase == ESP_MIP && addr == esp->command_block_dma) {
- zorro_esp_send_pio_cmd(esp, (u32) esp->command_block,
- esp_count, dma_count, write, cmd);
+ esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
+ dma_count, write, cmd);
return;
}
+ esp->send_cmd_error = 0;
+ esp->send_cmd_residual = 0;
+
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
@@ -718,14 +559,7 @@ static void zorro_esp_send_fastlane_dma_cmd(struct esp *esp, u32 addr,
static int zorro_esp_dma_error(struct esp *esp)
{
- struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev);
-
- /* check for error in case we've been doing PIO */
- if (zep->error == 1)
- return 1;
-
- /* do nothing - there seems to be no way to check for DMA errors */
- return 0;
+ return esp->send_cmd_error;
}
/* per-board ESP driver ops */
@@ -1033,6 +867,8 @@ static int zorro_esp_probe(struct zorro_dev *z,
goto fail_unmap_fastlane;
}
+ esp->fifo_reg = esp->regs + ESP_FDATA * 4;
+
/* Check whether a Blizzard 12x0 or CyberstormII really has SCSI */
if (zdd->scsi_option) {
zorro_esp_write8(esp, (ESP_CONFIG1_PENABLE | 7), ESP_CFG1);