@@ -1051,10 +1051,11 @@ static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq,
* allocate and set it up by calling scsi_add_lun.
*
* Return:
- * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
- * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is
+ *
+ * - SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
+ * - SCSI_SCAN_TARGET_PRESENT: target responded, but no device is
* attached at the LUN
- * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
+ * - SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
**/
static int scsi_probe_and_add_lun(struct scsi_target *starget,
u64 lun, int *bflagsp,
@@ -2914,16 +2914,18 @@ EXPORT_SYMBOL(fc_remote_port_add);
* port is no longer part of the topology. Note: Although a port
* may no longer be part of the topology, it may persist in the remote
* ports displayed by the fc_host. We do this under 2 conditions:
+ *
* 1) If the port was a scsi target, we delay its deletion by "blocking" it.
- * This allows the port to temporarily disappear, then reappear without
- * disrupting the SCSI device tree attached to it. During the "blocked"
- * period the port will still exist.
+ * This allows the port to temporarily disappear, then reappear without
+ * disrupting the SCSI device tree attached to it. During the "blocked"
+ * period the port will still exist.
+ *
* 2) If the port was a scsi target and disappears for longer than we
- * expect, we'll delete the port and the tear down the SCSI device tree
- * attached to it. However, we want to semi-persist the target id assigned
- * to that port if it eventually does exist. The port structure will
- * remain (although with minimal information) so that the target id
- * bindings remails.
+ * expect, we'll delete the port and the tear down the SCSI device tree
+ * attached to it. However, we want to semi-persist the target id assigned
+ * to that port if it eventually does exist. The port structure will
+ * remain (although with minimal information) so that the target id
+ * bindings remails.
*
* If the remote port is not an FCP Target, it will be fully torn down
* and deallocated, including the fc_remote_port class device.
@@ -116,8 +116,8 @@ EXPORT_SYMBOL(scsicam_bios_param);
* @hds: put heads here
* @secs: put sectors here
*
- * Description: determine the BIOS mapping/geometry used to create the partition
- * table, storing the results in *cyls, *hds, and *secs
+ * Determine the BIOS mapping/geometry used to create the partition
+ * table, storing the results in @cyls, @hds, and @secs
*
* Returns: -1 on failure, 0 on success.
*/
Sphinx is very pedantic with regards to ident/spacing. Fix some kernel-doc markups in order to solve those errors/warnings: ./drivers/scsi/scsicam.c:121: WARNING: Inline emphasis start-string without end-string. ./drivers/scsi/scsicam.c:121: WARNING: Inline emphasis start-string without end-string. ./drivers/scsi/scsicam.c:121: WARNING: Inline emphasis start-string without end-string. ./drivers/scsi/scsi_scan.c:1056: ERROR: Unexpected indentation. ./drivers/scsi/scsi_scan.c:1057: WARNING: Block quote ends without a blank line; unexpected unindent. ./drivers/scsi/scsi_transport_fc.c:2918: ERROR: Unexpected indentation. ./drivers/scsi/scsi_transport_fc.c:2921: WARNING: Block quote ends without a blank line; unexpected unindent. ./drivers/scsi/scsi_transport_fc.c:2922: WARNING: Enumerated list ends without a blank line; unexpected unindent. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> --- drivers/scsi/scsi_scan.c | 7 ++++--- drivers/scsi/scsi_transport_fc.c | 18 ++++++++++-------- drivers/scsi/scsicam.c | 4 ++-- 3 files changed, 16 insertions(+), 13 deletions(-)