| Message ID | 07b96c5b68470001197445fb3d28786ad9acdbe0.1364138740.git.viresh.kumar@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On 3/24/2013 8:59 PM, Viresh Kumar wrote: > Some assignments of policy-> min/max/cur/cpuinfo.min_freq/cpuinfo.max_freq > aren't required as part of it is done by cpufreq driver or cpufreq core. > > Remove them. > > At some places we merge multiple lines together too. > > Cc: Sekhar Nori <nsekhar@ti.com> > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: Paul Mundt <lethal@linux-sh.org> > Cc: linux-sh@vger.kernel.org > Cc: linux-omap@vger.kernel.org > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> > --- > Documentation/cpu-freq/cpu-drivers.txt | 5 +++-- > arch/arm/mach-davinci/cpufreq.c | 4 ---- > arch/arm/mach-imx/cpufreq.c | 3 --- > arch/sh/kernel/cpufreq.c | 9 +++------ > drivers/cpufreq/cpufreq-nforce2.c | 6 ++---- > drivers/cpufreq/omap-cpufreq.c | 4 +--- > 6 files changed, 9 insertions(+), 22 deletions(-) > > diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt > index 72f70b1..c94383f 100644 > --- a/Documentation/cpu-freq/cpu-drivers.txt > +++ b/Documentation/cpu-freq/cpu-drivers.txt > @@ -108,8 +108,9 @@ policy->governor must contain the "default policy" for > cpufreq_driver.target is called with > these values. > > -For setting some of these values, the frequency table helpers might be > -helpful. See the section 2 for more information on them. > +For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the > +frequency table helpers might be helpful. See the section 2 for more information > +on them. > > SMP systems normally have same clock source for a group of cpus. For these the > .init() would be called only once for the first online cpu. Here the .init() > diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c > index 8fb0c2a..ff46862 100644 > --- a/arch/arm/mach-davinci/cpufreq.c > +++ b/arch/arm/mach-davinci/cpufreq.c > @@ -149,10 +149,6 @@ static int davinci_cpu_init(struct cpufreq_policy *policy) > policy->cpuinfo.max_freq = policy->max; > } > > - policy->min = policy->cpuinfo.min_freq; > - policy->max = policy->cpuinfo.max_freq; > - policy->cur = davinci_getspeed(0); There is a line in the code a little above the ones you deleted that also sets these same variables. I guess you were relying on that line to set policy->cur, but that also sets policy->{min, max} which can be cleaned up. Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 25 March 2013 14:06, Sekhar Nori <nsekhar@ti.com> wrote: > There is a line in the code a little above the ones you deleted that > also sets these same variables. I guess you were relying on that line to > set policy->cur, but that also sets policy->{min, max} which can be > cleaned up. This code is rather confusing or wrong, this was the state of code before this patch: policy->cur = policy->min = policy->max = davinci_getspeed(0); if (freq_table) { result = cpufreq_frequency_table_cpuinfo(policy, freq_table); if (!result) cpufreq_frequency_table_get_attr(freq_table, policy->cpu); } else { policy->cpuinfo.min_freq = policy->min; policy->cpuinfo.max_freq = policy->max; } policy->min = policy->cpuinfo.min_freq; policy->max = policy->cpuinfo.max_freq; policy->cur = davinci_getspeed(0); The tricky part is if/else, where if don't return error if cpufreq_frequency_table_cpuinfo() fails. We want to set ->min[max] and cpuinfo.min[max] always. And i can see this code not doing that for some case even with my patch. Possible scenarios: 1. Valid freq_table: My patch + what you suggested is required. 2. Invalid freq_table: We never set cpuinfo.min[max] with or without my patch 3. No freq_table: Only my patch is required. If i do what you suggested then 2 and 3 would fail... If you want to return error in case cpufreq_frequency_table_cpuinfo(), then i can fix it properly. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 3/25/2013 2:15 PM, Viresh Kumar wrote: > On 25 March 2013 14:06, Sekhar Nori <nsekhar@ti.com> wrote: >> There is a line in the code a little above the ones you deleted that >> also sets these same variables. I guess you were relying on that line to >> set policy->cur, but that also sets policy->{min, max} which can be >> cleaned up. > > This code is rather confusing or wrong, this was the state of code before > this patch: > > policy->cur = policy->min = policy->max = davinci_getspeed(0); > > if (freq_table) { > result = cpufreq_frequency_table_cpuinfo(policy, freq_table); > if (!result) > cpufreq_frequency_table_get_attr(freq_table, > policy->cpu); > } else { > policy->cpuinfo.min_freq = policy->min; > policy->cpuinfo.max_freq = policy->max; > } > > policy->min = policy->cpuinfo.min_freq; > policy->max = policy->cpuinfo.max_freq; > policy->cur = davinci_getspeed(0); > > > The tricky part is if/else, where if don't return error if > cpufreq_frequency_table_cpuinfo() fails. We want to set ->min[max] > and cpuinfo.min[max] always. And i can see this code not doing that for some > case even with my patch. > > Possible scenarios: > 1. Valid freq_table: My patch + what you suggested is required. > 2. Invalid freq_table: We never set cpuinfo.min[max] with or without my patch > 3. No freq_table: Only my patch is required. > > If i do what you suggested then 2 and 3 would fail... If you want to > return error > in case cpufreq_frequency_table_cpuinfo(), then i can fix it properly. So down in the cpufreq driver probe below, we bail out if freq_table is not provided. So all this checking for freq_table in the code you pasted above is superfluous. If you can clean that part up and add checking for cpufreq_frequency_table_cpuinfo() as you proposed, I will be glad to test it out ;) Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt index 72f70b1..c94383f 100644 --- a/Documentation/cpu-freq/cpu-drivers.txt +++ b/Documentation/cpu-freq/cpu-drivers.txt @@ -108,8 +108,9 @@ policy->governor must contain the "default policy" for cpufreq_driver.target is called with these values. -For setting some of these values, the frequency table helpers might be -helpful. See the section 2 for more information on them. +For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the +frequency table helpers might be helpful. See the section 2 for more information +on them. SMP systems normally have same clock source for a group of cpus. For these the .init() would be called only once for the first online cpu. Here the .init() diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 8fb0c2a..ff46862 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -149,10 +149,6 @@ static int davinci_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.max_freq = policy->max; } - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - policy->cur = davinci_getspeed(0); - /* * Time measurement across the target() function yields ~1500-1800us * time taken with no drivers on notification list. diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c index cfce5e3..387dc4c 100644 --- a/arch/arm/mach-imx/cpufreq.c +++ b/arch/arm/mach-imx/cpufreq.c @@ -144,14 +144,11 @@ static int mxc_cpufreq_init(struct cpufreq_policy *policy) imx_freq_table[i].frequency = CPUFREQ_TABLE_END; policy->cur = clk_get_rate(cpu_clk) / 1000; - policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min; - policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max; /* Manual states, that PLL stabilizes in two CLK32 periods */ policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ; ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table); - if (ret < 0) { printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n", __func__, ret); diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c index 0fdf64b..88c8fee 100644 --- a/arch/sh/kernel/cpufreq.c +++ b/arch/sh/kernel/cpufreq.c @@ -116,7 +116,7 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy) return PTR_ERR(cpuclk); } - policy->cur = policy->min = policy->max = sh_cpufreq_get(cpu); + policy->cur = sh_cpufreq_get(cpu); freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL; if (freq_table) { @@ -129,15 +129,12 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy) dev_notice(dev, "no frequency table found, falling back " "to rate rounding.\n"); - policy->cpuinfo.min_freq = + policy->min = policy->cpuinfo.min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000; - policy->cpuinfo.max_freq = + policy->max = policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; } - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, " diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c index 224a478..af1542d 100644 --- a/drivers/cpufreq/cpufreq-nforce2.c +++ b/drivers/cpufreq/cpufreq-nforce2.c @@ -359,12 +359,10 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) min_fsb = NFORCE2_MIN_FSB; /* cpuinfo and default policy values */ - policy->cpuinfo.min_freq = min_fsb * fid * 100; - policy->cpuinfo.max_freq = max_fsb * fid * 100; + policy->min = policy->cpuinfo.min_freq = min_fsb * fid * 100; + policy->max = policy->cpuinfo.max_freq = max_fsb * fid * 100; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; policy->cur = nforce2_get(policy->cpu); - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; return 0; } diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index b610edd..ad7549c 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -177,7 +177,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) goto fail_ck; } - policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu); + policy->cur = omap_getspeed(policy->cpu); if (!freq_table) result = opp_init_cpufreq_table(mpu_dev, &freq_table); @@ -196,8 +196,6 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; policy->cur = omap_getspeed(policy->cpu); /*
Some assignments of policy-> min/max/cur/cpuinfo.min_freq/cpuinfo.max_freq aren't required as part of it is done by cpufreq driver or cpufreq core. Remove them. At some places we merge multiple lines together too. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- Documentation/cpu-freq/cpu-drivers.txt | 5 +++-- arch/arm/mach-davinci/cpufreq.c | 4 ---- arch/arm/mach-imx/cpufreq.c | 3 --- arch/sh/kernel/cpufreq.c | 9 +++------ drivers/cpufreq/cpufreq-nforce2.c | 6 ++---- drivers/cpufreq/omap-cpufreq.c | 4 +--- 6 files changed, 9 insertions(+), 22 deletions(-)