@@ -23,6 +23,10 @@ config SUDMAC
help
Enable support for the Renesas SUDMAC controllers.
+config SHDMA_R8A73A4
+ def_bool y
+ depends on ARCH_R8A73A4 && SH_DMAE != n
+
config SHDMA_R8A7740
def_bool y
depends on ARCH_R8A7740 && SH_DMAE != n
@@ -1,6 +1,7 @@
obj-$(CONFIG_SH_DMAE_BASE) += shdma-base.o shdma-of.o
obj-$(CONFIG_SH_DMAE) += shdma.o
shdma-y := shdmac.o
+shdma-$(CONFIG_SHDMA_R8A73A4) += shdma-r8a73a4.o
shdma-$(CONFIG_SHDMA_R8A7740) += shdma-r8a7740.o
shdma-objs := $(shdma-y)
obj-$(CONFIG_SUDMAC) += sudmac.o
new file mode 100644
@@ -0,0 +1,75 @@
+#include <linux/sh_dma.h>
+
+#include <mach/dma-register.h>
+#include <mach/r8a73a4.h>
+
+static const struct sh_dmae_slave_config dma_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_MMCIF0_TX,
+ .addr = 0xee200034,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd1,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF0_RX,
+ .addr = 0xee200034,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd2,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF1_TX,
+ .addr = 0xee220034,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xe1,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF1_RX,
+ .addr = 0xee220034,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xe2,
+ },
+};
+
+#define DMAE_CHANNEL(a, b) \
+ { \
+ .offset = (a) - 0x20, \
+ .dmars = (a) - 0x20 + 0x40, \
+ .chclr_bit = (b), \
+ .chclr_offset = 0x80 - 0x20, \
+ }
+
+static const struct sh_dmae_channel dma_channels[] = {
+ DMAE_CHANNEL(0x8000, 0),
+ DMAE_CHANNEL(0x8080, 1),
+ DMAE_CHANNEL(0x8100, 2),
+ DMAE_CHANNEL(0x8180, 3),
+ DMAE_CHANNEL(0x8200, 4),
+ DMAE_CHANNEL(0x8280, 5),
+ DMAE_CHANNEL(0x8300, 6),
+ DMAE_CHANNEL(0x8380, 7),
+ DMAE_CHANNEL(0x8400, 8),
+ DMAE_CHANNEL(0x8480, 9),
+ DMAE_CHANNEL(0x8500, 10),
+ DMAE_CHANNEL(0x8580, 11),
+ DMAE_CHANNEL(0x8600, 12),
+ DMAE_CHANNEL(0x8680, 13),
+ DMAE_CHANNEL(0x8700, 14),
+ DMAE_CHANNEL(0x8780, 15),
+ DMAE_CHANNEL(0x8800, 16),
+ DMAE_CHANNEL(0x8880, 17),
+ DMAE_CHANNEL(0x8900, 18),
+ DMAE_CHANNEL(0x8980, 19),
+};
+
+const struct sh_dmae_pdata r8a73a4_dma_pdata = {
+ .slave = dma_slaves,
+ .slave_num = ARRAY_SIZE(dma_slaves),
+ .channel = dma_channels,
+ .channel_num = ARRAY_SIZE(dma_channels),
+ .ts_low_shift = TS_LOW_SHIFT,
+ .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
+ .ts_high_shift = TS_HI_SHIFT,
+ .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
+ .ts_shift = dma_ts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chclr_present = 1,
+ .chclr_bitwise = 1,
+};
@@ -61,6 +61,13 @@ struct sh_dmae_desc {
#define to_sh_dev(chan) container_of(chan->shdma_chan.dma_chan.device,\
struct sh_dmae_device, shdma_dev.dma_dev)
+#ifdef CONFIG_SHDMA_R8A73A4
+extern const struct sh_dmae_pdata r8a73a4_dma_pdata;
+#define r8a73a4_shdma_devid &r8a73a4_dma_pdata
+#else
+#define r8a73a4_shdma_devid NULL
+#endif
+
#ifdef CONFIG_SHDMA_R8A7740
extern const struct sh_dmae_pdata r8a7740_dma_pdata;
#define r8a7740_shdma_devid &r8a7740_dma_pdata
@@ -907,6 +907,7 @@ MODULE_DEVICE_TABLE(of, sh_dmae_of_match);
const struct platform_device_id sh_dmae_id_table[] = {
{.name = SH_DMAE_DRV_NAME,},
+ {.name = "shdma-r8a73a4", .driver_data = (kernel_ulong_t)r8a73a4_shdma_devid,},
{.name = "shdma-r8a7740", .driver_data = (kernel_ulong_t)r8a7740_shdma_devid,},
{}
};
This configuration data will be re-used, when DMAC DT support is added to r8a73a4. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> --- v4: make struct sh_dmae_pdata r8a73a4_dma_pdata "const" drivers/dma/sh/Kconfig | 4 ++ drivers/dma/sh/Makefile | 1 + drivers/dma/sh/shdma-r8a73a4.c | 75 ++++++++++++++++++++++++++++++++++++++++ drivers/dma/sh/shdma.h | 7 ++++ drivers/dma/sh/shdmac.c | 1 + 5 files changed, 88 insertions(+), 0 deletions(-) create mode 100644 drivers/dma/sh/shdma-r8a73a4.c