@@ -3,6 +3,7 @@
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
+ * Copyright (C) 2014 Ulrich Hecht
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,6 +25,7 @@
#include <linux/dma-contiguous.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/of.h>
#include <linux/of_fdt.h>
#include <asm/mach/arch.h>
#include "common.h"
@@ -54,37 +56,61 @@ void __init rcar_gen2_timer_init(void)
{
#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK)
u32 mode = rcar_gen2_read_mode_pins();
+ bool is_e2 = (bool)of_find_compatible_node(NULL, NULL,
+ "renesas,r8a7794");
#endif
#ifdef CONFIG_ARM_ARCH_TIMER
void __iomem *base;
int extal_mhz = 0;
u32 freq;
- /* At Linux boot time the r8a7790 arch timer comes up
- * with the counter disabled. Moreover, it may also report
- * a potentially incorrect fixed 13 MHz frequency. To be
- * correct these registers need to be updated to use the
- * frequency EXTAL / 2 which can be determined by the MD pins.
- */
-
- switch (mode & (MD(14) | MD(13))) {
- case 0:
- extal_mhz = 15;
- break;
- case MD(13):
- extal_mhz = 20;
- break;
- case MD(14):
- extal_mhz = 26;
- break;
- case MD(13) | MD(14):
- extal_mhz = 30;
- break;
+ if (is_e2) {
+ freq = 260000000 / 8; /* ZS / 8 */
+ /* CNTVOFF has to be initialized either from non-secure
+ * Hypervisor mode or secure Monitor mode with SCR.NS==1.
+ * If TrustZone is enabled then it should be handled by the
+ * secure code.
+ */
+ asm volatile(
+ " cps 0x16\n"
+ " mrc p15, 0, r1, c1, c1, 0\n"
+ " orr r0, r1, #1\n"
+ " mcr p15, 0, r0, c1, c1, 0\n"
+ " isb\n"
+ " mov r0, #0\n"
+ " mcrr p15, 4, r0, r0, c14\n"
+ " isb\n"
+ " mcr p15, 0, r1, c1, c1, 0\n"
+ " isb\n"
+ " cps 0x13\n"
+ : : : "r0", "r1");
+ } else {
+ /* At Linux boot time the r8a7790 arch timer comes up
+ * with the counter disabled. Moreover, it may also report
+ * a potentially incorrect fixed 13 MHz frequency. To be
+ * correct these registers need to be updated to use the
+ * frequency EXTAL / 2 which can be determined by the MD pins.
+ */
+
+ switch (mode & (MD(14) | MD(13))) {
+ case 0:
+ extal_mhz = 15;
+ break;
+ case MD(13):
+ extal_mhz = 20;
+ break;
+ case MD(14):
+ extal_mhz = 26;
+ break;
+ case MD(13) | MD(14):
+ extal_mhz = 30;
+ break;
+ }
+
+ /* The arch timer frequency equals EXTAL / 2 */
+ freq = extal_mhz * (1000000 / 2);
}
- /* The arch timer frequency equals EXTAL / 2 */
- freq = extal_mhz * (1000000 / 2);
-
/* Remap "armgcnt address map" space */
base = ioremap(0xe6080000, PAGE_SIZE);
On E2, the arch timer is hooked up to a different clock, and the CA7's arch timer CNTVOFF register must be initialized. Based on work by Hisashi Nakamura. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> --- arch/arm/mach-shmobile/setup-rcar-gen2.c | 72 ++++++++++++++++++++++---------- 1 file changed, 49 insertions(+), 23 deletions(-)