diff mbox

[1/3] i2c: core changes for slave support

Message ID 1416326695-13083-2-git-send-email-wsa@the-dreams.de (mailing list archive)
State Not Applicable
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Wolfram Sang Nov. 18, 2014, 4:04 p.m. UTC
From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Finally(!), make Linux support being an I2C slave. Most of the existing
infrastructure is reused. We mainly add i2c_slave_register/unregister()
calls which tells i2c bus drivers to activate the slave mode. Then, they
also get a callback to report slave events to.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Changes since RFC:
* add slave mode kernel doc
* lock adapter around slave registration
* inline i2c_slave_event

 drivers/i2c/i2c-core.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/i2c.h    | 29 +++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+)
diff mbox

Patch

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index f43b4e11647a..bbcf427bf123 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -24,6 +24,7 @@ 
    (c) 2013  Wolfram Sang <wsa@the-dreams.de>
    I2C ACPI code Copyright (C) 2014 Intel Corp
    Author: Lan Tianyu <tianyu.lan@intel.com>
+   I2C slave support (c) 2014 by Wolfram Sang <wsa@sang-engineering.com> 
  */
 
 #include <linux/module.h>
@@ -2902,6 +2903,54 @@  trace:
 }
 EXPORT_SYMBOL(i2c_smbus_xfer);
 
+int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
+{
+	int ret;
+
+	if (!client || !slave_cb)
+		return -EINVAL;
+
+	if (!(client->flags & I2C_CLIENT_TEN)) {
+		/* Enforce stricter address checking */
+		ret = i2c_check_addr_validity(client->addr);
+		if (ret)
+			return ret;
+	}
+
+	if (!client->adapter->algo->reg_slave)
+		return -EOPNOTSUPP;
+
+	client->slave_cb = slave_cb;
+
+	i2c_lock_adapter(client->adapter);
+	ret = client->adapter->algo->reg_slave(client);
+	i2c_unlock_adapter(client->adapter);
+
+	if (ret)
+		client->slave_cb = NULL;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_register);
+
+int i2c_slave_unregister(struct i2c_client *client)
+{
+	int ret;
+
+	if (!client->adapter->algo->unreg_slave)
+		return -EOPNOTSUPP;
+
+	i2c_lock_adapter(client->adapter);
+	ret = client->adapter->algo->unreg_slave(client);
+	i2c_unlock_adapter(client->adapter);
+
+	if (ret == 0)
+		client->slave_cb = NULL;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_unregister);
+
 MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
 MODULE_DESCRIPTION("I2C-Bus main module");
 MODULE_LICENSE("GPL");
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index b556e0ab946f..0f1c5a61c931 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -46,6 +46,8 @@  struct i2c_client;
 struct i2c_driver;
 union i2c_smbus_data;
 struct i2c_board_info;
+enum i2c_slave_event;
+typedef int (*i2c_slave_cb_t)(struct i2c_client *, enum i2c_slave_event, u8 *);
 
 struct module;
 
@@ -209,6 +211,8 @@  struct i2c_driver {
  * @irq: indicates the IRQ generated by this device (if any)
  * @detected: member of an i2c_driver.clients list or i2c-core's
  *	userspace_devices list
+ * @slave_cb: Callback when I2C slave mode of an adapter is used. The adapter
+ * 	calls it to pass on slave events to the slave driver.
  *
  * An i2c_client identifies a single device (i.e. chip) connected to an
  * i2c bus. The behaviour exposed to Linux is defined by the driver
@@ -224,6 +228,7 @@  struct i2c_client {
 	struct device dev;		/* the device structure		*/
 	int irq;			/* irq issued by device		*/
 	struct list_head detected;
+	i2c_slave_cb_t slave_cb;	/* callback for slave mode	*/
 };
 #define to_i2c_client(d) container_of(d, struct i2c_client, dev)
 
@@ -246,6 +251,25 @@  static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
 	dev_set_drvdata(&dev->dev, data);
 }
 
+/* I2C slave support */
+
+enum i2c_slave_event {
+	I2C_SLAVE_REQ_READ_START,
+	I2C_SLAVE_REQ_READ_END,
+	I2C_SLAVE_REQ_WRITE_START,
+	I2C_SLAVE_REQ_WRITE_END,
+	I2C_SLAVE_STOP,
+};
+
+extern int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb);
+extern int i2c_slave_unregister(struct i2c_client *client);
+
+static inline int i2c_slave_event(struct i2c_client *client,
+				  enum i2c_slave_event event, u8 *val)
+{
+	return client->slave_cb(client, event, val);
+}
+
 /**
  * struct i2c_board_info - template for device creation
  * @type: chip type, to initialize i2c_client.name
@@ -352,6 +376,8 @@  i2c_register_board_info(int busnum, struct i2c_board_info const *info,
  *   into I2C transfers instead.
  * @functionality: Return the flags that this algorithm/adapter pair supports
  *   from the I2C_FUNC_* flags.
+ * @reg_slave: Register given client to I2C slave mode of this adapter
+ * @unreg_slave: Unregister given client from I2C slave mode of this adapter
  *
  * The following structs are for those who like to implement new bus drivers:
  * i2c_algorithm is the interface to a class of hardware solutions which can
@@ -377,6 +403,9 @@  struct i2c_algorithm {
 
 	/* To determine what the adapter supports */
 	u32 (*functionality) (struct i2c_adapter *);
+
+	int (*reg_slave)(struct i2c_client *client);
+	int (*unreg_slave)(struct i2c_client *client);
 };
 
 /**