@@ -294,16 +294,16 @@
"lb", "qspi", "sdh", "sd0", "z";
};
/* Variable factor clocks */
- sd1_clk: sd2_clk@e6150078 {
+ sd2_clk: sd2_clk@e6150078 {
compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe6150078 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-output-names = "sd1";
};
- sd2_clk: sd3_clk@e615007c {
+ sd3_clk: sd3_clk@e615026c {
compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe615007c 0 4>;
+ reg = <0 0xe615026c 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-output-names = "sd2";
@@ -518,7 +518,7 @@
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
+ clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
<&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
@@ -527,7 +527,7 @@
R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
>;
clock-output-names =
- "sdhi2", "sdhi1", "sdhi0",
+ "sdhi3", "sdhi2", "sdhi0",
"mmcif0", "cmt1", "usbdmac0", "usbdmac1";
};
mstp7_clks: mstp7_clks@e615014c {
* Correct base address of SD3 div6 clk. * Update div6 labels and MSTP output names There appears to have been some inconsistency and confusion here as on the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3. This has no run-time affect as the clock nodes are not currently used. Fixes: 8e181633e6ca96049 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree") Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- * A similar change to update the div6 clock node names and labels, and the MSTP clock output-names is required for the r8a7791. The base addresses appear to be correct there. --- arch/arm/boot/dts/r8a7794.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)