@@ -92,6 +92,7 @@
#define RCAR_IRQ_ACK_RECV (~(MAT | MDR) & 0xFF)
#define ID_LAST_MSG (1 << 0)
+#define ID_FIRST_MSG (1 << 1)
#define ID_DONE (1 << 2)
#define ID_ARBLOST (1 << 3)
#define ID_NACK (1 << 4)
@@ -254,13 +255,22 @@ static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
int read = !!rcar_i2c_is_recv(priv);
priv->pos = 0;
- priv->flags = 0;
if (priv->msgs_left == 1)
rcar_i2c_flags_set(priv, ID_LAST_MSG);
rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read);
- rcar_i2c_write(priv, ICMSR, 0);
- rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
+ /*
+ * We don't have a testcase but the HW engineers say that the write order
+ * of ICMSR and ICMCR depends on whether we issue START or REP_START. Since
+ * it didn't cause a drawback for me, let's rather be safe than sorry.
+ */
+ if (rcar_i2c_flags_has(priv, ID_FIRST_MSG)) {
+ rcar_i2c_write(priv, ICMSR, 0);
+ rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
+ } else {
+ rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
+ rcar_i2c_write(priv, ICMSR, 0);
+ }
rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
}
@@ -268,6 +278,7 @@ static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv)
{
priv->msg++;
priv->msgs_left--;
+ priv->flags = 0;
rcar_i2c_prepare_msg(priv);
}
@@ -486,10 +497,10 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
}
}
- /* init data */
+ /* init first message */
priv->msg = msgs;
priv->msgs_left = num;
-
+ priv->flags = ID_FIRST_MSG;
rcar_i2c_prepare_msg(priv);
time_left = wait_event_timeout(priv->wait,