| Message ID | 1448023017-21816-2-git-send-email-geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | d9e1a0ef458302d90d4255b243922e45c25913b2 |
| Delegated to: | Simon Horman |
| Headers | show |
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 5f22d6dcdd141f9c..0c3b9e341ce7fd8e 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -329,7 +329,7 @@ }; gic: interrupt-controller@e8201000 { - compatible = "arm,cortex-a9-gic"; + compatible = "arm,pl390"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller;
Replace the "arm,cortex-a9-gic" compatible value for the GIC by "arm,pl390", as the documentation states it is a PL390. This has been confirmed (thanks Chris, Wolfram!) by reading the GICD_IIDR register, which reports 0x0000043b (PL390 = 0x00, ARM = 0x43b). This has no effect on runtime behavior, as currently the GIC driver treats both compatible values the same. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- You can read the GICD_IIDR register from U-Boot using md 0xe8201008 1 --- arch/arm/boot/dts/r7s72100.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)