| Message ID | 1458222449-12324-2-git-send-email-geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | RFC |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
On Thu, Mar 17, 2016 at 02:47:25PM +0100, Geert Uytterhoeven wrote: > Amend the DT bindings for the Renesas SCI driver to allow describing > optional GPIO-controlled modem lines, which can be used where dedicated > modem lines are not available. > > The property naming is dictated by the SERIAL_MCTRL_GPIO helpers. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > Cc: devicetree@vger.kernel.org > --- > Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt > index 528c3b90f23cb04b..f8d7b36742967163 100644 > --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt > +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt > @@ -76,6 +76,9 @@ Optional properties: > - dmas: Must contain a list of two references to DMA specifiers, one for > transmission, and one for reception. > - dma-names: Must contain a list of two DMA names, "tx" and "rx". > + - {cts,dsr,dcd,rng,rts,dtr,out1,out2}-gpios: Must contain a GPIO specifier, > + referring to the GPIO pin to be used as the UART's CTS, DSR, DCD, RNG, RTS, > + DTR, OUT1, or OUT2 line. > > Example: > aliases { Hi Geert, I do not feel strongly about this but I wonder if it would make sense to update the example with the new properties. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Simon, On Thu, Mar 17, 2016 at 11:43 PM, Simon Horman <horms@verge.net.au> wrote: > On Thu, Mar 17, 2016 at 02:47:25PM +0100, Geert Uytterhoeven wrote: >> Amend the DT bindings for the Renesas SCI driver to allow describing >> optional GPIO-controlled modem lines, which can be used where dedicated >> modem lines are not available. >> >> The property naming is dictated by the SERIAL_MCTRL_GPIO helpers. >> >> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> >> Cc: devicetree@vger.kernel.org >> --- >> Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt >> index 528c3b90f23cb04b..f8d7b36742967163 100644 >> --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt >> +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt >> @@ -76,6 +76,9 @@ Optional properties: >> - dmas: Must contain a list of two references to DMA specifiers, one for >> transmission, and one for reception. >> - dma-names: Must contain a list of two DMA names, "tx" and "rx". >> + - {cts,dsr,dcd,rng,rts,dtr,out1,out2}-gpios: Must contain a GPIO specifier, >> + referring to the GPIO pin to be used as the UART's CTS, DSR, DCD, RNG, RTS, >> + DTR, OUT1, or OUT2 line. >> >> Example: >> aliases { > > Hi Geert, > > I do not feel strongly about this but I wonder if it > would make sense to update the example with the new properties. These are meant to be added to the board .dts file, not to the .dtsi files. I can add an example if you like, let's hope nobody copies it blindly to a .dtsi file... Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Mar 17, 2016 at 02:47:25PM +0100, Geert Uytterhoeven wrote: > Amend the DT bindings for the Renesas SCI driver to allow describing > optional GPIO-controlled modem lines, which can be used where dedicated > modem lines are not available. > > The property naming is dictated by the SERIAL_MCTRL_GPIO helpers. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > Cc: devicetree@vger.kernel.org > --- > Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt > index 528c3b90f23cb04b..f8d7b36742967163 100644 > --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt > +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt > @@ -76,6 +76,9 @@ Optional properties: > - dmas: Must contain a list of two references to DMA specifiers, one for > transmission, and one for reception. > - dma-names: Must contain a list of two DMA names, "tx" and "rx". > + - {cts,dsr,dcd,rng,rts,dtr,out1,out2}-gpios: Must contain a GPIO specifier, > + referring to the GPIO pin to be used as the UART's CTS, DSR, DCD, RNG, RTS, > + DTR, OUT1, or OUT2 line. It would be good to document these in a common location as at least some are already in use. Otherwise, Acked-by: Rob Herring <robh@kernel.org> Rob -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 528c3b90f23cb04b..f8d7b36742967163 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -76,6 +76,9 @@ Optional properties: - dmas: Must contain a list of two references to DMA specifiers, one for transmission, and one for reception. - dma-names: Must contain a list of two DMA names, "tx" and "rx". + - {cts,dsr,dcd,rng,rts,dtr,out1,out2}-gpios: Must contain a GPIO specifier, + referring to the GPIO pin to be used as the UART's CTS, DSR, DCD, RNG, RTS, + DTR, OUT1, or OUT2 line. Example: aliases {
Amend the DT bindings for the Renesas SCI driver to allow describing optional GPIO-controlled modem lines, which can be used where dedicated modem lines are not available. The property naming is dictated by the SERIAL_MCTRL_GPIO helpers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: devicetree@vger.kernel.org --- Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 3 +++ 1 file changed, 3 insertions(+)