| Message ID | 1473421394-9745-7-git-send-email-bd-phuc@jinso.co.jp (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Bui Duc, Thank you for the patch. On Friday 09 Sep 2016 20:43:12 bd-phuc@jinso.co.jp wrote: > From: Bui Duc Phuc <bd-phuc@jinso.co.jp> > > Add support for the new R-Car Gen3 CMT0 and CMT1 bindings. > > Signed-off-by: Bui Duc Phuc <bd-phuc@jinso.co.jp> > --- > drivers/clocksource/sh_cmt.c | 21 +++++++++++++++++++-- > 1 file changed, 19 insertions(+), 2 deletions(-) > > diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c > index 103c493..1542aef 100644 > --- a/drivers/clocksource/sh_cmt.c > +++ b/drivers/clocksource/sh_cmt.c > @@ -69,6 +69,7 @@ enum sh_cmt_model { > SH_CMT_32BIT_FAST, > SH_CMT_48BIT, > SH_CMT_48BIT_GEN2, > + SH_CMT_48BIT_GEN3, > }; > > struct sh_cmt_info { > @@ -230,6 +231,16 @@ static const struct sh_cmt_info sh_cmt_info[] = { > .read_count = sh_cmt_read32, > .write_count = sh_cmt_write32, > }, > + [SH_CMT_48BIT_GEN3] = { > + .model = SH_CMT_48BIT_GEN3, > + .width = 32, > + .overflow_bit = SH_CMT32_CMCSR_CMF, > + .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF), > + .read_control = sh_cmt_read32, > + .write_control = sh_cmt_write32, > + .read_count = sh_cmt_read32, > + .write_count = sh_cmt_write32, > + }, > }; > > #define CMCSR 0 /* channel register */ > @@ -864,6 +875,7 @@ static int sh_cmt_setup_channel(struct sh_cmt_channel > *ch, unsigned int index, ch->cmt = cmt; > ch->index = index; > ch->hwidx = hwidx; > + ch->timer_bit = hwidx; > > /* > * Compute the address of the channel control register block. For the > @@ -888,6 +900,12 @@ static int sh_cmt_setup_channel(struct sh_cmt_channel > *ch, unsigned int index, case SH_CMT_48BIT_GEN2: > ch->iostart = cmt->mapbase + ch->hwidx * 0x100; > ch->ioctrl = ch->iostart + 0x10; > + ch->timer_bit = 0; > + break; > + case SH_CMT_48BIT_GEN3: > + ch->iostart = cmt->mapbase + ch->hwidx * 0x100; > + ch->ioctrl = ch->iostart + 0x10; > + ch->timer_bit = 0; > break; > } > > @@ -899,8 +917,6 @@ static int sh_cmt_setup_channel(struct sh_cmt_channel > *ch, unsigned int index, ch->match_value = ch->max_match_value; > raw_spin_lock_init(&ch->lock); > > - ch->timer_bit = cmt->info->model == SH_CMT_48BIT_GEN2 ? 0 : ch->hwidx; > - > ret = sh_cmt_register(ch, dev_name(&cmt->pdev->dev), > clockevent, clocksource); > if (ret) { > @@ -944,6 +960,7 @@ static const struct of_device_id sh_cmt_of_table[] > __maybe_unused = { > { .compatible = "renesas,cmt-32-fast", .data = > &sh_cmt_info[SH_CMT_32BIT_FAST] }, > { .compatible = "renesas,cmt-48", .data = &sh_cmt_info[SH_CMT_48BIT] > }, > { .compatible = "renesas,cmt-48-gen2", .data = > &sh_cmt_info[SH_CMT_48BIT_GEN2] }, > + { .compatible = "renesas,cmt-48-gen3", .data = > &sh_cmt_info[SH_CMT_48BIT_GEN3] }, Given that the Gen2 and Gen3 CMT seem identical based on the above code, how about just using SH_CMT_48BIT_GEN2 here ? You wouldn't need any of the above changes. > { } > }; > MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 103c493..1542aef 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -69,6 +69,7 @@ enum sh_cmt_model { SH_CMT_32BIT_FAST, SH_CMT_48BIT, SH_CMT_48BIT_GEN2, + SH_CMT_48BIT_GEN3, }; struct sh_cmt_info { @@ -230,6 +231,16 @@ static const struct sh_cmt_info sh_cmt_info[] = { .read_count = sh_cmt_read32, .write_count = sh_cmt_write32, }, + [SH_CMT_48BIT_GEN3] = { + .model = SH_CMT_48BIT_GEN3, + .width = 32, + .overflow_bit = SH_CMT32_CMCSR_CMF, + .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF), + .read_control = sh_cmt_read32, + .write_control = sh_cmt_write32, + .read_count = sh_cmt_read32, + .write_count = sh_cmt_write32, + }, }; #define CMCSR 0 /* channel register */ @@ -864,6 +875,7 @@ static int sh_cmt_setup_channel(struct sh_cmt_channel *ch, unsigned int index, ch->cmt = cmt; ch->index = index; ch->hwidx = hwidx; + ch->timer_bit = hwidx; /* * Compute the address of the channel control register block. For the @@ -888,6 +900,12 @@ static int sh_cmt_setup_channel(struct sh_cmt_channel *ch, unsigned int index, case SH_CMT_48BIT_GEN2: ch->iostart = cmt->mapbase + ch->hwidx * 0x100; ch->ioctrl = ch->iostart + 0x10; + ch->timer_bit = 0; + break; + case SH_CMT_48BIT_GEN3: + ch->iostart = cmt->mapbase + ch->hwidx * 0x100; + ch->ioctrl = ch->iostart + 0x10; + ch->timer_bit = 0; break; } @@ -899,8 +917,6 @@ static int sh_cmt_setup_channel(struct sh_cmt_channel *ch, unsigned int index, ch->match_value = ch->max_match_value; raw_spin_lock_init(&ch->lock); - ch->timer_bit = cmt->info->model == SH_CMT_48BIT_GEN2 ? 0 : ch->hwidx; - ret = sh_cmt_register(ch, dev_name(&cmt->pdev->dev), clockevent, clocksource); if (ret) { @@ -944,6 +960,7 @@ static const struct of_device_id sh_cmt_of_table[] __maybe_unused = { { .compatible = "renesas,cmt-32-fast", .data = &sh_cmt_info[SH_CMT_32BIT_FAST] }, { .compatible = "renesas,cmt-48", .data = &sh_cmt_info[SH_CMT_48BIT] }, { .compatible = "renesas,cmt-48-gen2", .data = &sh_cmt_info[SH_CMT_48BIT_GEN2] }, + { .compatible = "renesas,cmt-48-gen3", .data = &sh_cmt_info[SH_CMT_48BIT_GEN3] }, { } }; MODULE_DEVICE_TABLE(of, sh_cmt_of_table);