sh_keysc: use enable/disable_irq_wake()

Commit Message

Magnus Damm April 1, 2009, 2:39 p.m. UTC

From: Magnus Damm <[e-mail]>

Modify the sh_keysc driver to use enable/disable_irq_wake()
during suspend and resume. These functions are used to enable
the sh_keysc interrupt in the interrupt controller so the
keypad can be used to wakeup the system from suspend.

Signed-off-by: Magnus Damm <[e-mail]>
---

 Tested with wakeup disabled and enabled on a Migo-R board.

 drivers/input/keyboard/sh_keysc.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

--- 0001/drivers/input/keyboard/sh_keysc.c
+++ work/drivers/input/keyboard/sh_keysc.c	2009-04-01 22:55:59.000000000 +0900
@@ -259,12 +259,15 @@  static int sh_keysc_suspend(struct devic
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
 	unsigned short value;
 
 	value = ioread16(priv->iomem_base + KYCR1_OFFS);
 
-	if (device_may_wakeup(dev))
+	if (device_may_wakeup(dev)) {
 		value |= 0x80;
+		enable_irq_wake(irq);
+	}
 	else
 		value &= ~0x80;
 
@@ -272,8 +275,20 @@  static int sh_keysc_suspend(struct devic
 	return 0;
 }
 
+static int sh_keysc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(irq);
+
+	return 0;
+}
+
 static struct dev_pm_ops sh_keysc_dev_pm_ops = {
 	.suspend = sh_keysc_suspend,
+	.resume = sh_keysc_resume,
 };
 
 struct platform_driver sh_keysc_device_driver = {