diff mbox

sh: sh7723 clock framework rewrite V2

Message ID 20090603083959.28587.36860.sendpatchset@rx1.opensource.se (mailing list archive)
State Accepted
Headers show

Commit Message

Magnus Damm June 3, 2009, 8:39 a.m. UTC
From: Magnus Damm <damm@igel.co.jp>

This patch contains V2 of the sh7723 clock framework
rewrite. The new code makes use of the recently merged
div4, div6 and mstp32 helper code. Both extal and dll
are supported as input clocks to the pll.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
---

 Tested on ap325.

 arch/sh/Kconfig                        |    2 
 arch/sh/kernel/cpu/sh4a/Makefile       |    2 
 arch/sh/kernel/cpu/sh4a/clock-sh7722.c |   57 --------
 arch/sh/kernel/cpu/sh4a/clock-sh7723.c |  222 ++++++++++++++++++++++++++++++++
 4 files changed, 225 insertions(+), 58 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

--- 0001/arch/sh/Kconfig
+++ work/arch/sh/Kconfig	2009-06-03 16:04:32.000000000 +0900
@@ -516,7 +516,7 @@  config SH_CLK_CPG
 
 config SH_CLK_CPG_LEGACY
 	depends on SH_CLK_CPG
-	def_bool y if !CPU_SUBTYPE_SH7785
+	def_bool y if !CPU_SUBTYPE_SH7785 && !CPU_SUBTYPE_SH7723
 
 config SH_CLK_MD
 	int "CPU Mode Pin Setting"
--- 0001/arch/sh/kernel/cpu/sh4a/Makefile
+++ work/arch/sh/kernel/cpu/sh4a/Makefile	2009-06-03 16:04:32.000000000 +0900
@@ -26,7 +26,7 @@  clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= cl
 clock-$(CONFIG_CPU_SUBTYPE_SH7786)	:= clock-sh7786.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7723.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7724)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
--- 0001/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ work/arch/sh/kernel/cpu/sh4a/clock-sh7722.c	2009-06-03 16:04:32.000000000 +0900
@@ -1,7 +1,7 @@ 
 /*
  * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
  *
- * SH7343, SH7722, SH7723 & SH7366 support for the clock framework
+ * SH7343, SH7722 & SH7366 support for the clock framework
  *
  * Copyright (c) 2006-2007 Nomad Global Solutions Inc
  * Based on code for sh7343 by Paul Mundt
@@ -176,11 +176,6 @@  static unsigned long module_clk_recalc(s
 #define STCMASK		0x3f
 #define DIVCALC(div)	(div/2-1)
 #define FRQCRKICK	0x80000000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-#define MASTERDIVS	{ 6, 8, 12, 16 }
-#define STCMASK		0x1f
-#define DIVCALC(div)	(div-1)
-#define FRQCRKICK	0x00000000
 #else
 #define MASTERDIVS	{ 2, 3, 4, 6, 8, 16 }
 #define STCMASK		0x1f
@@ -681,56 +676,6 @@  static struct clk sh7722_mstpcr_clocks[]
 	MSTPCR("vpu0", "bus_clk", 2, 1, CLK_ENABLE_ON_INIT),
 	MSTPCR("lcdc0", "bus_clk", 2, 0, 0),
 #endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7723)
-	/* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
-	MSTPCR("tlb0", "cpu_clk", 0, 31, 0),
-	MSTPCR("ic0", "cpu_clk", 0, 30, 0),
-	MSTPCR("oc0", "cpu_clk", 0, 29, 0),
-	MSTPCR("l2c0", "sh_clk", 0, 28, 0),
-	MSTPCR("ilmem0", "cpu_clk", 0, 27, 0),
-	MSTPCR("fpu0", "cpu_clk", 0, 24, 0),
-	MSTPCR("intc0", "cpu_clk", 0, 22, 0),
-	MSTPCR("dmac0", "bus_clk", 0, 21, 0),
-	MSTPCR("sh0", "sh_clk", 0, 20, 0),
-	MSTPCR("hudi0", "peripheral_clk", 0, 19, 0),
-	MSTPCR("ubc0", "cpu_clk", 0, 17, 0),
-	MSTPCR("tmu0", "peripheral_clk", 0, 15, 0),
-	MSTPCR("cmt0", "r_clk", 0, 14, 0),
-	MSTPCR("rwdt0", "r_clk", 0, 13, 0),
-	MSTPCR("dmac1", "bus_clk", 0, 12, 0),
-	MSTPCR("tmu1", "peripheral_clk", 0, 11, 0),
-	MSTPCR("flctl0", "peripheral_clk", 0, 10, 0),
-	MSTPCR("scif0", "peripheral_clk", 0, 9, 0),
-	MSTPCR("scif1", "peripheral_clk", 0, 8, 0),
-	MSTPCR("scif2", "peripheral_clk", 0, 7, 0),
-	MSTPCR("scif3", "bus_clk", 0, 6, 0),
-	MSTPCR("scif4", "bus_clk", 0, 5, 0),
-	MSTPCR("scif5", "bus_clk", 0, 4, 0),
-	MSTPCR("msiof0", "bus_clk", 0, 2, 0),
-	MSTPCR("msiof1", "bus_clk", 0, 1, 0),
-	MSTPCR("meram0", "sh_clk", 0, 0, CLK_ENABLE_ON_INIT),
-	MSTPCR("i2c0", "peripheral_clk", 1, 9, 0),
-	MSTPCR("rtc0", "r_clk", 1, 8, 0),
-	MSTPCR("atapi0", "sh_clk", 2, 28, 0),
-	MSTPCR("adc0", "peripheral_clk", 2, 28, 0),
-	MSTPCR("tpu0", "bus_clk", 2, 25, 0),
-	MSTPCR("irda0", "peripheral_clk", 2, 24, 0),
-	MSTPCR("tsif0", "bus_clk", 2, 22, 0),
-	MSTPCR("icb0", "bus_clk", 2, 21, 0),
-	MSTPCR("sdhi0", "bus_clk", 2, 18, 0),
-	MSTPCR("sdhi1", "bus_clk", 2, 17, 0),
-	MSTPCR("keysc0", "r_clk", 2, 14, 0),
-	MSTPCR("usb0", "bus_clk", 2, 11, 0),
-	MSTPCR("2dg0", "bus_clk", 2, 10, 0),
-	MSTPCR("siu0", "bus_clk", 2, 8, 0),
-	MSTPCR("veu1", "bus_clk", 2, 6, CLK_ENABLE_ON_INIT),
-	MSTPCR("vou0", "bus_clk", 2, 5, 0),
-	MSTPCR("beu0", "bus_clk", 2, 4, 0),
-	MSTPCR("ceu0", "bus_clk", 2, 3, 0),
-	MSTPCR("veu0", "bus_clk", 2, 2, CLK_ENABLE_ON_INIT),
-	MSTPCR("vpu0", "bus_clk", 2, 1, CLK_ENABLE_ON_INIT),
-	MSTPCR("lcdc0", "bus_clk", 2, 0, 0),
-#endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7724)
 	/* See Datasheet : Overview -> Block Diagram */
 	MSTPCR("tlb0", "cpu_clk", 0, 31, 0),
--- /dev/null
+++ work/arch/sh/kernel/cpu/sh4a/clock-sh7723.c	2009-06-03 16:13:52.000000000 +0900
@@ -0,0 +1,222 @@ 
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+ *
+ * SH7723 clock framework support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+
+/* SH7723 registers */
+#define FRQCR		0xa4150000
+#define VCLKCR		0xa4150004
+#define SCLKACR		0xa4150008
+#define SCLKBCR		0xa415000c
+#define IRDACLKCR	0xa4150018
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define DLLFRQ		0xa4150050
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.name           = "rclk",
+	.id             = -1,
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+struct clk extal_clk = {
+	.name		= "extal",
+	.id		= -1,
+	.rate		= 33333333,
+};
+
+/* The dll multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long dll_recalc(struct clk *clk)
+{
+	unsigned long mult;
+
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(DLLFRQ);
+	else
+		mult = 0;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops dll_clk_ops = {
+	.recalc		= dll_recalc,
+};
+
+static struct clk dll_clk = {
+	.name           = "dll_clk",
+	.id             = -1,
+	.ops		= &dll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+	unsigned long div = 1;
+
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
+	else
+		div = 2;
+
+	return (clk->parent->rate * mult) / div;
+}
+
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.name		= "pll_clk",
+	.id		= -1,
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&dll_clk,
+	&pll_clk,
+};
+
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+
+static struct clk_div_mult_table div4_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
+       DIV4_SIUA, DIV4_SIUB, DIV4_IRDA, DIV4_NR };
+
+#define DIV4(_str, _reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4("shyway_clk", FRQCR, 12, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x0db4, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x0dbf, 0),
+	[DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x0dbf, 0),
+	[DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x0dbf, 0),
+	[DIV4_IRDA] = DIV4("irda_clk", IRDACLKCR, 0, 0x0dbf, 0),
+};
+
+struct clk div6_clks[] = {
+	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
+};
+
+#define MSTP(_str, _parent, _reg, _bit, _force_on, _need_cpg, _need_ram) \
+  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _force_on * CLK_ENABLE_ON_INIT)
+
+static struct clk mstp_clks[] = {
+	/* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
+	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, 1, 1, 0),
+	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, 1, 1, 0),
+	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, 1, 1, 0),
+	MSTP("l2c0", &div4_clks[DIV4_SH], MSTPCR0, 28, 1, 1, 0),
+	MSTP("ilmem0", &div4_clks[DIV4_I], MSTPCR0, 27, 1, 1, 0),
+	MSTP("fpu0", &div4_clks[DIV4_I], MSTPCR0, 24, 1, 1, 0),
+	MSTP("intc0", &div4_clks[DIV4_I], MSTPCR0, 22, 1, 1, 0),
+	MSTP("dmac0", &div4_clks[DIV4_B], MSTPCR0, 21, 0, 1, 1),
+	MSTP("sh0", &div4_clks[DIV4_SH], MSTPCR0, 20, 0, 1, 0),
+	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0, 1, 0),
+	MSTP("ubc0", &div4_clks[DIV4_I], MSTPCR0, 17, 0, 1, 0),
+	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0, 1, 0),
+	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0, 0, 0),
+	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0, 0, 0),
+	MSTP("dmac1", &div4_clks[DIV4_B], MSTPCR0, 12, 0, 1, 1),
+	MSTP("tmu1", &div4_clks[DIV4_P], MSTPCR0, 11, 0, 1, 0),
+	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0, 1, 0),
+	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 9, 0, 1, 0),
+	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 8, 0, 1, 0),
+	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 7, 0, 1, 0),
+	MSTP("scif3", &div4_clks[DIV4_B], MSTPCR0, 6, 0, 1, 0),
+	MSTP("scif4", &div4_clks[DIV4_B], MSTPCR0, 5, 0, 1, 0),
+	MSTP("scif5", &div4_clks[DIV4_B], MSTPCR0, 4, 0, 1, 0),
+	MSTP("msiof0", &div4_clks[DIV4_B], MSTPCR0, 2, 0, 1, 0),
+	MSTP("msiof1", &div4_clks[DIV4_B], MSTPCR0, 1, 0, 1, 0),
+	MSTP("meram0", &div4_clks[DIV4_SH], MSTPCR0, 0, 1, 1, 0),
+
+	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0, 1, 0),
+	MSTP("rtc0", &r_clk, MSTPCR1, 8, 0, 0, 0),
+
+	MSTP("atapi0", &div4_clks[DIV4_SH], MSTPCR2, 28, 0, 1, 0),
+	MSTP("adc0", &div4_clks[DIV4_P], MSTPCR2, 27, 0, 1, 0),
+	MSTP("tpu0", &div4_clks[DIV4_B], MSTPCR2, 25, 0, 1, 0),
+	MSTP("irda0", &div4_clks[DIV4_P], MSTPCR2, 24, 0, 1, 0),
+	MSTP("tsif0", &div4_clks[DIV4_B], MSTPCR2, 22, 0, 1, 0),
+	MSTP("icb0", &div4_clks[DIV4_B], MSTPCR2, 21, 0, 1, 1),
+	MSTP("sdhi0", &div4_clks[DIV4_B], MSTPCR2, 18, 0, 1, 0),
+	MSTP("sdhi1", &div4_clks[DIV4_B], MSTPCR2, 17, 0, 1, 0),
+	MSTP("keysc0", &r_clk, MSTPCR2, 14, 0, 0, 0),
+	MSTP("usb0", &div4_clks[DIV4_B], MSTPCR2, 11, 0, 1, 0),
+	MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 10, 0, 1, 1),
+	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0, 1, 0),
+	MSTP("veu1", &div4_clks[DIV4_B], MSTPCR2, 6, 1, 1, 1),
+	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0, 1, 1),
+	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0, 1, 1),
+	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0, 1, 1),
+	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, 1, 1, 1),
+	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, 1, 1, 1),
+	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0, 1, 1),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	/* autodetect extal or dll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &dll_clk;
+	else
+		pll_clk.parent = &extal_clk;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+
+	return ret;
+}