@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
@@ -18,13 +19,64 @@
#include <asm/io.h>
#include <cpu/sh7724.h>
+static struct mtd_partition kfr2r09_nor_flash_partitions[] =
+{
+ {
+ .name = "boot",
+ .offset = 0,
+ .size = (4 * 1024 * 1024),
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ },
+ {
+ .name = "other",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data kfr2r09_nor_flash_data = {
+ .width = 2,
+ .parts = kfr2r09_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
+};
+
+static struct resource kfr2r09_nor_flash_resources[] = {
+ [0] = {
+ .name = "NOR Flash",
+ .start = 0x00000000,
+ .end = 0x03ffffff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device kfr2r09_nor_flash_device = {
+ .name = "physmap-flash",
+ .resource = kfr2r09_nor_flash_resources,
+ .num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources),
+ .dev = {
+ .platform_data = &kfr2r09_nor_flash_data,
+ },
+};
+
+static struct platform_device *kfr2r09_devices[] __initdata = {
+ &kfr2r09_nor_flash_device,
+};
+
+#define BSC_CS0BCR 0xfec10004
+#define BSC_CS0WCR 0xfec10024
+
static int __init kfr2r09_devices_setup(void)
{
/* enable SCIF1 serial port for YC401 console support */
gpio_request(GPIO_FN_SCIF1_RXD, NULL);
gpio_request(GPIO_FN_SCIF1_TXD, NULL);
- return 0;
+ /* setup NOR flash at CS0 */
+ ctrl_outl(0x36db0400, BSC_CS0BCR);
+ ctrl_outl(0x00000500, BSC_CS0WCR);
+
+ return platform_add_devices(kfr2r09_devices,
+ ARRAY_SIZE(kfr2r09_devices));
}
device_initcall(kfr2r09_devices_setup);