Index: linux-2.6/drivers/base/power/clock_ops.c
===================================================================
--- /dev/null
+++ linux-2.6/drivers/base/power/clock_ops.c
@@ -0,0 +1,430 @@
+/*
+ * drivers/base/power/clock_ops.c - Generic clock manipulation PM callbacks
+ *
+ * Copyright (c) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#ifdef CONFIG_PM_RUNTIME
+
+struct pm_runtime_clk_data {
+	struct list_head clock_list;
+	struct mutex lock;
+};
+
+enum pce_status {
+	PCE_STATUS_NONE = 0,
+	PCE_STATUS_ACQUIRED,
+	PCE_STATUS_ENABLED,
+	PCE_STATUS_ERROR,
+};
+
+struct pm_clock_entry {
+	struct list_head node;
+	char *con_id;
+	struct clk *clk;
+	enum pce_status status;
+};
+
+static struct pm_runtime_clk_data *__to_prd(struct device *dev)
+{
+	return dev ? dev->power.subsys_data : NULL;
+}
+
+/**
+ * pm_runtime_clk_add - Start using a device clock for runtime PM.
+ * @dev: Device whose clock is going to be used for runtime PM.
+ * @con_id: Connection ID of the clock.
+ *
+ * Add the clock represented by @con_id to the list of clocks used for
+ * the runtime PM of @dev.
+ */
+int pm_runtime_clk_add(struct device *dev, const char *con_id)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	if (!prd)
+		return -EINVAL;
+
+	ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+	if (!ce) {
+		dev_err(dev, "Not enough memory for clock entry.\n");
+		return -ENOMEM;
+	}
+
+	if (con_id) {
+		ce->con_id = kstrdup(con_id, GFP_KERNEL);
+		if (!ce->con_id) {
+			dev_err(dev,
+				"Not enough memory for clock connection ID.\n");
+			kfree(ce);
+			return -ENOMEM;
+		}
+	}
+
+	mutex_lock(&prd->lock);
+	list_add_tail(&ce->node, &prd->clock_list);
+	mutex_unlock(&prd->lock);
+	return 0;
+}
+
+/**
+ * __pm_runtime_clk_remove - Destroy runtime PM clock entry.
+ * @ce: Runtime PM clock entry to destroy.
+ *
+ * This routine must be called under the mutex protecting the runtime PM list
+ * of clocks corresponding the the @ce's device.
+ */
+static void __pm_runtime_clk_remove(struct pm_clock_entry *ce)
+{
+	if (!ce)
+		return;
+
+	list_del(&ce->node);
+
+	if (ce->status < PCE_STATUS_ERROR) {
+		if (ce->status == PCE_STATUS_ENABLED)
+			clk_disable(ce->clk);
+
+		if (ce->status >= PCE_STATUS_ACQUIRED)
+			clk_put(ce->clk);
+	}
+
+	if (ce->con_id)
+		kfree(ce->con_id);
+
+	kfree(ce);
+}
+
+/**
+ * pm_runtime_clk_remove - Stop using a device clock for runtime PM.
+ * @dev: Device whose clock should not be used for runtime PM any more.
+ * @con_id: Connection ID of the clock.
+ *
+ * Remove the clock represented by @con_id from the list of clocks used for
+ * the runtime PM of @dev.
+ */
+void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	if (!prd)
+		return;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry(ce, &prd->clock_list, node) {
+		if (!con_id && !ce->con_id) {
+			__pm_runtime_clk_remove(ce);
+			break;
+		} else if (!con_id || !ce->con_id) {
+			continue;
+		} else if (!strcmp(con_id, ce->con_id)) {
+			__pm_runtime_clk_remove(ce);
+			break;
+		}
+	}
+
+	mutex_unlock(&prd->lock);
+}
+
+/**
+ * pm_runtime_clk_init - Initialize a device's list of runtime PM clocks.
+ * @dev: Device to initialize the list of runtime PM clocks for.
+ *
+ * Allocate a struct pm_runtime_clk_data object, initialize its lock member and
+ * make the @dev's power.subsys_data field point to it.
+ */
+int pm_runtime_clk_init(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd;
+
+	prd = kzalloc(sizeof(*prd), GFP_KERNEL);
+	if (!prd) {
+		dev_err(dev, "Not enough memory fo runtime PM data.\n");
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&prd->clock_list);
+	mutex_init(&prd->lock);
+	dev->power.subsys_data = prd;
+	return 0;
+}
+
+/**
+ * pm_runtime_clk_destroy - Destroy a device's list of runtime PM clocks.
+ * @dev: Device to destroy the list of runtime PM clocks for.
+ *
+ * Clear the @dev's power.subsys_data field, remove the list of clock entries
+ * from the struct pm_runtime_clk_data object pointed to by it before and free
+ * that object.
+ */
+void pm_runtime_clk_destroy(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce, *c;
+
+	if (!prd)
+		return;
+
+	dev->power.subsys_data = NULL;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry_safe_reverse(ce, c, &prd->clock_list, node)
+		__pm_runtime_clk_remove(ce);
+
+	mutex_unlock(&prd->lock);
+
+	kfree(prd);
+}
+
+/**
+ * pm_runtime_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @con_id: Connection ID of the clock.
+ */
+static void pm_runtime_clk_acquire(struct device *dev,
+				    struct pm_clock_entry *ce)
+{
+	ce->clk = clk_get(dev, ce->con_id);
+	if (IS_ERR(ce->clk)) {
+		ce->status = PCE_STATUS_ERROR;
+	} else {
+		ce->status = PCE_STATUS_ACQUIRED;
+		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+	}
+}
+
+/**
+ * pm_runtime_clk_suspend - Disable clocks in a device's runtime PM clock list.
+ * @dev: Device to disable the clocks for.
+ */
+int pm_runtime_clk_suspend(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	if (!prd)
+		return 0;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry_reverse(ce, &prd->clock_list, node) {
+		if (ce->status == PCE_STATUS_NONE)
+			pm_runtime_clk_acquire(dev, ce);
+
+		if (ce->status < PCE_STATUS_ERROR) {
+			clk_disable(ce->clk);
+			ce->status = PCE_STATUS_ACQUIRED;
+		}
+	}
+
+	mutex_unlock(&prd->lock);
+
+	return 0;
+}
+
+/**
+ * pm_runtime_clk_resume - Enable clocks in a device's runtime PM clock list.
+ * @dev: Device to enable the clocks for.
+ */
+int pm_runtime_clk_resume(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	if (!prd)
+		return 0;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry(ce, &prd->clock_list, node) {
+		if (ce->status == PCE_STATUS_NONE)
+			pm_runtime_clk_acquire(dev, ce);
+
+		if (ce->status < PCE_STATUS_ERROR) {
+			clk_enable(ce->clk);
+			ce->status = PCE_STATUS_ENABLED;
+		}
+	}
+
+	mutex_unlock(&prd->lock);
+
+	return 0;
+}
+
+/**
+ * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the pwr_domain member of that object is copied to the device's
+ * pwr_domain field and its con_ids member is used to populate the device's list
+ * of runtime PM clocks, depending on @action.
+ *
+ * If the device's pwr_domain field is already populated with a value different
+ * from the one stored in the struct pm_clk_notifier_block object, the function
+ * does nothing.
+ */
+static int pm_runtime_clk_notify(struct notifier_block *nb,
+				 unsigned long action, void *data)
+{
+	struct pm_clk_notifier_block *clknb;
+	struct device *dev = data;
+	char *con_id;
+	int error;
+
+	dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+	clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (dev->pwr_domain)
+			break;
+
+		error = pm_runtime_clk_init(dev);
+		if (error)
+			break;
+
+		dev->pwr_domain = clknb->pwr_domain;
+		if (clknb->con_ids[0]) {
+			for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+				pm_runtime_clk_add(dev, con_id);
+		} else {
+			pm_runtime_clk_add(dev, NULL);
+		}
+
+		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (dev->pwr_domain != clknb->pwr_domain)
+			break;
+
+		dev->pwr_domain = NULL;
+		pm_runtime_clk_destroy(dev);
+		break;
+	}
+
+	return 0;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+/**
+ * enable_clock - Enable a device clock.
+ * @dev: Device whose clock is to be enabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void enable_clock(struct device *dev, const char *con_id)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, con_id);
+	if (!IS_ERR(clk)) {
+		clk_enable(clk);
+		clk_put(clk);
+		dev_info(dev, "Runtime PM disabled, clock forced on.\n");
+	}
+}
+
+/**
+ * disable_clock - Disable a device clock.
+ * @dev: Device whose clock is to be disabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void disable_clock(struct device *dev, const char *con_id)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, con_id);
+	if (!IS_ERR(clk)) {
+		clk_disable(clk);
+		clk_put(clk);
+		dev_info(dev, "Runtime PM disabled, clock forced off.\n");
+	}
+}
+
+/**
+ * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the con_ids member of that object is used to enable or disable
+ * the device's clocks, depending on @action.
+ */
+static int pm_runtime_clk_notify(struct notifier_block *nb,
+				 unsigned long action, void *data)
+{
+	struct pm_clk_notifier_block *clknb;
+	struct device *dev = data;
+
+	dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+	clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (clknb->con_ids[0]) {
+			for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+				enable_clock(dev, con_id);
+		} else {
+			enable_clock(dev, NULL);
+		}
+		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (clknb->con_ids[0]) {
+			for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+				disable_clock(dev, con_id);
+		} else {
+			disable_clock(dev, NULL);
+		}
+		break;
+	}
+
+	return 0;
+}
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+/**
+ * pm_runtime_clk_add_notifier - Add bus type notifier for runtime PM clocks.
+ * @bus: Bus type to add the notifier to.
+ * @clknb: Notifier to be added to the given bus type.
+ *
+ * The nb member of @clknb is not expected to be initialized and its
+ * notifier_call member will be replaced with pm_runtime_clk_notify().  However,
+ * the remaining members of @clknb should be populated prior to calling this
+ * routine.
+ */
+void pm_runtime_clk_add_notifier(struct bus_type *bus,
+				 struct pm_clk_notifier_block *clknb)
+{
+	if (!bus || !clknb)
+		return;
+
+	clknb->nb.notifier_call = pm_runtime_clk_notify;
+	bus_register_notifier(bus, &clknb->nb);
+}
Index: linux-2.6/kernel/power/Kconfig
===================================================================
--- linux-2.6.orig/kernel/power/Kconfig
+++ linux-2.6/kernel/power/Kconfig
@@ -229,3 +229,7 @@ config PM_OPP
 	  representing individual voltage domains and provides SOC
 	  implementations a ready to use framework to manage OPPs.
 	  For more information, read <file:Documentation/power/opp.txt>
+
+config PM_RUNTIME_CLK
+	def_bool y
+	depends on PM_RUNTIME && HAVE_CLK
Index: linux-2.6/drivers/base/power/Makefile
===================================================================
--- linux-2.6.orig/drivers/base/power/Makefile
+++ linux-2.6/drivers/base/power/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.
 obj-$(CONFIG_PM_RUNTIME)	+= runtime.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
 obj-$(CONFIG_PM_OPP)	+= opp.o
+obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o
 
 ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
 ccflags-$(CONFIG_PM_VERBOSE)   += -DDEBUG
Index: linux-2.6/include/linux/pm_runtime.h
===================================================================
--- linux-2.6.orig/include/linux/pm_runtime.h
+++ linux-2.6/include/linux/pm_runtime.h
@@ -245,4 +245,46 @@ static inline void pm_runtime_dont_use_a
 	__pm_runtime_use_autosuspend(dev, false);
 }
 
+struct pm_clk_notifier_block {
+	struct notifier_block nb;
+	struct dev_power_domain *pwr_domain;
+	char *con_ids[];
+};
+
+#ifdef CONFIG_PM_RUNTIME_CLK
+extern int pm_runtime_clk_init(struct device *dev);
+extern void pm_runtime_clk_destroy(struct device *dev);
+extern int pm_runtime_clk_add(struct device *dev, const char *con_id);
+extern void pm_runtime_clk_remove(struct device *dev, const char *con_id);
+extern int pm_runtime_clk_suspend(struct device *dev);
+extern int pm_runtime_clk_resume(struct device *dev);
+#else
+static inline int pm_runtime_clk_init(struct device *dev)
+{
+	return -EINVAL;
+}
+static inline void pm_runtime_clk_destroy(struct device *dev)
+{
+}
+static inline int pm_runtime_clk_add(struct device *dev, const char *con_id)
+{
+	return -EINVAL;
+}
+static inline void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+{
+}
+#define pm_runtime_clock_suspend	NULL
+#define pm_runtime_clock_resume		NULL
+#endif
+
+#ifdef CONFIG_HAVE_CLK
+extern void pm_runtime_clk_add_notifier(struct bus_type *bus,
+					struct pm_clk_notifier_block *clknb);
+#else
+static inline void pm_runtime_clk_add_notifier(struct bus_type *bus,
+					struct pm_clk_notifier_block *clknb)
+{
+}
+#endif
+
 #endif
Index: linux-2.6/arch/arm/mach-shmobile/pm_runtime.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-shmobile/pm_runtime.c
+++ linux-2.6/arch/arm/mach-shmobile/pm_runtime.c
@@ -21,70 +21,6 @@
 #include <linux/slab.h>
 
 #ifdef CONFIG_PM_RUNTIME
-#define BIT_ONCE 0
-#define BIT_ACTIVE 1
-#define BIT_CLK_ENABLED 2
-
-struct pm_runtime_data {
-	unsigned long flags;
-	struct clk *clk;
-};
-
-static struct pm_runtime_data *__to_prd(struct device *dev)
-{
-	return dev ? dev->power.subsys_data : NULL;
-}
-
-static void platform_pm_runtime_init(struct device *dev,
-				     struct pm_runtime_data *prd)
-{
-	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
-		prd->clk = clk_get(dev, NULL);
-		if (!IS_ERR(prd->clk)) {
-			set_bit(BIT_ACTIVE, &prd->flags);
-			dev_info(dev, "clocks managed by runtime pm\n");
-		}
-	}
-}
-
-static void platform_pm_runtime_bug(struct device *dev,
-				    struct pm_runtime_data *prd)
-{
-	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
-		dev_err(dev, "runtime pm suspend before resume\n");
-}
-
-static int default_platform_runtime_suspend(struct device *dev)
-{
-	struct pm_runtime_data *prd = __to_prd(dev);
-
-	dev_dbg(dev, "%s()\n", __func__);
-
-	platform_pm_runtime_bug(dev, prd);
-
-	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
-		clk_disable(prd->clk);
-		clear_bit(BIT_CLK_ENABLED, &prd->flags);
-	}
-
-	return 0;
-}
-
-static int default_platform_runtime_resume(struct device *dev)
-{
-	struct pm_runtime_data *prd = __to_prd(dev);
-
-	dev_dbg(dev, "%s()\n", __func__);
-
-	platform_pm_runtime_init(dev, prd);
-
-	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
-		clk_enable(prd->clk);
-		set_bit(BIT_CLK_ENABLED, &prd->flags);
-	}
-
-	return 0;
-}
 
 static int default_platform_runtime_idle(struct device *dev)
 {
@@ -94,87 +30,29 @@ static int default_platform_runtime_idle
 
 static struct dev_power_domain default_power_domain = {
 	.ops = {
-		.runtime_suspend = default_platform_runtime_suspend,
-		.runtime_resume = default_platform_runtime_resume,
+		.runtime_suspend = pm_runtime_clk_suspend,
+		.runtime_resume = pm_runtime_clk_resume,
 		.runtime_idle = default_platform_runtime_idle,
 		USE_PLATFORM_PM_SLEEP_OPS
 	},
 };
 
-static int platform_bus_notify(struct notifier_block *nb,
-			       unsigned long action, void *data)
-{
-	struct device *dev = data;
-	struct pm_runtime_data *prd;
+#define DEFAULT_PWR_DOMAIN_PTR	(&default_power_domain)
 
-	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+#else
 
-	switch (action) {
-	case BUS_NOTIFY_BIND_DRIVER:
-		prd = kzalloc(sizeof(*prd), GFP_KERNEL);
-		if (prd) {
-			dev->power.subsys_data = prd;
-			dev->pwr_domain = &default_power_domain;
-		} else {
-			dev_err(dev, "unable to alloc memory for runtime pm\n");
-		}
-		break;
-	case BUS_NOTIFY_UNBOUND_DRIVER:
-		prd = __to_prd(dev);
-		if (prd) {
-			if (test_bit(BIT_CLK_ENABLED, &prd->flags))
-				clk_disable(prd->clk);
-
-			if (test_bit(BIT_ACTIVE, &prd->flags))
-				clk_put(prd->clk);
-		}
-		break;
-	}
-
-	return 0;
-}
-
-#else /* CONFIG_PM_RUNTIME */
-
-static int platform_bus_notify(struct notifier_block *nb,
-			       unsigned long action, void *data)
-{
-	struct device *dev = data;
-	struct clk *clk;
-
-	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
-
-	switch (action) {
-	case BUS_NOTIFY_BIND_DRIVER:
-		clk = clk_get(dev, NULL);
-		if (!IS_ERR(clk)) {
-			clk_enable(clk);
-			clk_put(clk);
-			dev_info(dev, "runtime pm disabled, clock forced on\n");
-		}
-		break;
-	case BUS_NOTIFY_UNBOUND_DRIVER:
-		clk = clk_get(dev, NULL);
-		if (!IS_ERR(clk)) {
-			clk_disable(clk);
-			clk_put(clk);
-			dev_info(dev, "runtime pm disabled, clock forced off\n");
-		}
-		break;
-	}
-
-	return 0;
-}
+#define DEFAULT_PWR_DOMAIN_PTR	NULL
 
 #endif /* CONFIG_PM_RUNTIME */
 
-static struct notifier_block platform_bus_notifier = {
-	.notifier_call = platform_bus_notify
+static struct pm_clk_notifier_block platform_bus_notifier = {
+	.pwr_domain = DEFAULT_PWR_DOMAIN_PTR,
+	.con_ids = { NULL, },
 };
 
 static int __init sh_pm_runtime_init(void)
 {
-	bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+	pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
 	return 0;
 }
 core_initcall(sh_pm_runtime_init);
