diff mbox

[2/8] PM / Domains: Rename struct dev_power_domain to struct dev_pm_domain

Message ID 201106112226.07631.rjw@sisk.pl (mailing list archive)
State Not Applicable
Headers show

Commit Message

Rafael Wysocki June 11, 2011, 8:26 p.m. UTC
From: Rafael J. Wysocki <rjw@sisk.pl>

The naming convention used by commit 7538e3db6e015e890825fbd9f86599b
(PM: Add support for device power domains), which introduced the
struct dev_power_domain type for representing device power domains,
evidently confuses some developers who tend to think that objects
of this type must correspond to "power domains" as defined by
hardware, which is not the case.  Namely, at the kernel level, a
struct dev_power_domain object can represent arbitrary set of devices
that are mutually dependent power management-wise and need not belong
to one hardware power domain.  To avoid that confusion, rename struct
dev_power_domain to struct dev_pm_domain and rename the related
pointers in struct device and struct pm_clk_notifier_block from
pwr_domain to pm_domain.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 Documentation/power/devices.txt          |    8 ++++----
 arch/arm/mach-omap1/pm_bus.c             |    4 ++--
 arch/arm/mach-shmobile/pm_runtime.c      |    8 ++++----
 arch/arm/plat-omap/omap_device.c         |    4 ++--
 arch/sh/kernel/cpu/shmobile/pm_runtime.c |    6 +++---
 drivers/base/power/clock_ops.c           |   14 +++++++-------
 drivers/base/power/main.c                |   30 +++++++++++++++---------------
 drivers/base/power/runtime.c             |   12 ++++++------
 include/linux/device.h                   |    4 ++--
 include/linux/pm.h                       |    2 +-
 include/linux/pm_runtime.h               |    2 +-
 11 files changed, 47 insertions(+), 47 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Kevin Hilman June 20, 2011, 11:37 p.m. UTC | #1
"Rafael J. Wysocki" <rjw@sisk.pl> writes:

> From: Rafael J. Wysocki <rjw@sisk.pl>
>
> The naming convention used by commit 7538e3db6e015e890825fbd9f86599b
> (PM: Add support for device power domains), which introduced the
> struct dev_power_domain type for representing device power domains,
> evidently confuses some developers who tend to think that objects
> of this type must correspond to "power domains" as defined by
> hardware, which is not the case.  Namely, at the kernel level, a
> struct dev_power_domain object can represent arbitrary set of devices
> that are mutually dependent power management-wise and need not belong
> to one hardware power domain.  To avoid that confusion, rename struct
> dev_power_domain to struct dev_pm_domain and rename the related
> pointers in struct device and struct pm_clk_notifier_block from
> pwr_domain to pm_domain.
>
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Acked-by: Kevin Hilman <khilman@ti.com>

Thanks!

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

Index: linux-2.6/arch/arm/mach-omap1/pm_bus.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap1/pm_bus.c
+++ linux-2.6/arch/arm/mach-omap1/pm_bus.c
@@ -49,7 +49,7 @@  static int omap1_pm_runtime_resume(struc
 	return pm_generic_runtime_resume(dev);
 }
 
-static struct dev_power_domain default_power_domain = {
+static struct dev_pm_domain default_pm_domain = {
 	.ops = {
 		.runtime_suspend = omap1_pm_runtime_suspend,
 		.runtime_resume = omap1_pm_runtime_resume,
@@ -58,7 +58,7 @@  static struct dev_power_domain default_p
 };
 
 static struct pm_clk_notifier_block platform_bus_notifier = {
-	.pwr_domain = &default_power_domain,
+	.pm_domain = &default_pm_domain,
 	.con_ids = { "ick", "fck", NULL, },
 };
 
Index: linux-2.6/arch/arm/mach-shmobile/pm_runtime.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-shmobile/pm_runtime.c
+++ linux-2.6/arch/arm/mach-shmobile/pm_runtime.c
@@ -28,7 +28,7 @@  static int default_platform_runtime_idle
 	return pm_runtime_suspend(dev);
 }
 
-static struct dev_power_domain default_power_domain = {
+static struct dev_pm_domain default_pm_domain = {
 	.ops = {
 		.runtime_suspend = pm_runtime_clk_suspend,
 		.runtime_resume = pm_runtime_clk_resume,
@@ -37,16 +37,16 @@  static struct dev_power_domain default_p
 	},
 };
 
-#define DEFAULT_PWR_DOMAIN_PTR	(&default_power_domain)
+#define DEFAULT_PM_DOMAIN_PTR	(&default_pm_domain)
 
 #else
 
-#define DEFAULT_PWR_DOMAIN_PTR	NULL
+#define DEFAULT_PM_DOMAIN_PTR	NULL
 
 #endif /* CONFIG_PM_RUNTIME */
 
 static struct pm_clk_notifier_block platform_bus_notifier = {
-	.pwr_domain = DEFAULT_PWR_DOMAIN_PTR,
+	.pm_domain = DEFAULT_PM_DOMAIN_PTR,
 	.con_ids = { NULL, },
 };
 
Index: linux-2.6/arch/arm/plat-omap/omap_device.c
===================================================================
--- linux-2.6.orig/arch/arm/plat-omap/omap_device.c
+++ linux-2.6/arch/arm/plat-omap/omap_device.c
@@ -550,7 +550,7 @@  static int _od_runtime_resume(struct dev
 	return omap_device_enable(pdev);
 }
 
-static struct dev_power_domain omap_device_power_domain = {
+static struct dev_pm_domain omap_device_pm_domain = {
 	.ops = {
 		.runtime_suspend = _od_runtime_suspend,
 		.runtime_resume = _od_runtime_resume,
@@ -571,7 +571,7 @@  int omap_device_register(struct omap_dev
 	pr_debug("omap_device: %s: registering\n", od->pdev.name);
 
 	od->pdev.dev.parent = &omap_device_parent;
-	od->pdev.dev.pwr_domain = &omap_device_power_domain;
+	od->pdev.dev.pwr_domain = &omap_device_pm_domain;
 	return platform_device_register(&od->pdev);
 }
 
Index: linux-2.6/arch/sh/kernel/cpu/shmobile/pm_runtime.c
===================================================================
--- linux-2.6.orig/arch/sh/kernel/cpu/shmobile/pm_runtime.c
+++ linux-2.6/arch/sh/kernel/cpu/shmobile/pm_runtime.c
@@ -256,7 +256,7 @@  out:
 	return ret;
 }
 
-static struct dev_power_domain default_power_domain = {
+static struct dev_pm_domain default_power_domain = {
 	.ops = {
 		.runtime_suspend = default_platform_runtime_suspend,
 		.runtime_resume = default_platform_runtime_resume,
@@ -285,7 +285,7 @@  static int platform_bus_notify(struct no
 		hwblk_disable(hwblk_info, hwblk);
 		/* make sure driver re-inits itself once */
 		__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
-		dev->pwr_domain = &default_power_domain;
+		dev->pm_domain = &default_power_domain;
 		break;
 	/* TODO: add BUS_NOTIFY_BIND_DRIVER and increase idle count */
 	case BUS_NOTIFY_BOUND_DRIVER:
@@ -299,7 +299,7 @@  static int platform_bus_notify(struct no
 		__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
 		break;
 	case BUS_NOTIFY_DEL_DEVICE:
-		dev->pwr_domain = NULL;
+		dev->pm_domain = NULL;
 		break;
 	}
 	return 0;
Index: linux-2.6/Documentation/power/devices.txt
===================================================================
--- linux-2.6.orig/Documentation/power/devices.txt
+++ linux-2.6/Documentation/power/devices.txt
@@ -506,8 +506,8 @@  routines.  Nevertheless, different callb
 situation where it actually matters.
 
 
-Device Power Domains
---------------------
+Device Power Management Domains
+-------------------------------
 Sometimes devices share reference clocks or other power resources.  In those
 cases it generally is not possible to put devices into low-power states
 individually.  Instead, a set of devices sharing a power resource can be put
@@ -516,8 +516,8 @@  power resource.  Of course, they also ne
 together, by turning the shared power resource on.  A set of devices with this
 property is often referred to as a power domain.
 
-Support for power domains is provided through the pwr_domain field of struct
-device.  This field is a pointer to an object of type struct dev_power_domain,
+Support for power domains is provided through the pm_domain field of struct
+device.  This field is a pointer to an object of type struct dev_pm_domain,
 defined in include/linux/pm.h, providing a set of power management callbacks
 analogous to the subsystem-level and device driver callbacks that are executed
 for the given device during all power transitions, instead of the respective
Index: linux-2.6/include/linux/device.h
===================================================================
--- linux-2.6.orig/include/linux/device.h
+++ linux-2.6/include/linux/device.h
@@ -516,7 +516,7 @@  struct device_dma_parameters {
  * 		minimizes board-specific #ifdefs in drivers.
  * @power:	For device power management.
  * 		See Documentation/power/devices.txt for details.
- * @pwr_domain:	Provide callbacks that are executed during system suspend,
+ * @pm_domain:	Provide callbacks that are executed during system suspend,
  * 		hibernation, system resume and during runtime PM transitions
  * 		along with subsystem-level and driver-level callbacks.
  * @numa_node:	NUMA node this device is close to.
@@ -568,7 +568,7 @@  struct device {
 	void		*platform_data;	/* Platform specific data, device
 					   core doesn't touch it */
 	struct dev_pm_info	power;
-	struct dev_power_domain	*pwr_domain;
+	struct dev_pm_domain	*pm_domain;
 
 #ifdef CONFIG_NUMA
 	int		numa_node;	/* NUMA node this device is close to */
Index: linux-2.6/include/linux/pm.h
===================================================================
--- linux-2.6.orig/include/linux/pm.h
+++ linux-2.6/include/linux/pm.h
@@ -471,7 +471,7 @@  extern void update_pm_runtime_accounting
  * hibernation, system resume and during runtime PM transitions along with
  * subsystem-level and driver-level callbacks.
  */
-struct dev_power_domain {
+struct dev_pm_domain {
 	struct dev_pm_ops	ops;
 };
 
Index: linux-2.6/include/linux/pm_runtime.h
===================================================================
--- linux-2.6.orig/include/linux/pm_runtime.h
+++ linux-2.6/include/linux/pm_runtime.h
@@ -247,7 +247,7 @@  static inline void pm_runtime_dont_use_a
 
 struct pm_clk_notifier_block {
 	struct notifier_block nb;
-	struct dev_power_domain *pwr_domain;
+	struct dev_pm_domain *pm_domain;
 	char *con_ids[];
 };
 
Index: linux-2.6/drivers/base/power/clock_ops.c
===================================================================
--- linux-2.6.orig/drivers/base/power/clock_ops.c
+++ linux-2.6/drivers/base/power/clock_ops.c
@@ -278,11 +278,11 @@  int pm_runtime_clk_resume(struct device
  *
  * For this function to work, @nb must be a member of an object of type
  * struct pm_clk_notifier_block containing all of the requisite data.
- * Specifically, the pwr_domain member of that object is copied to the device's
- * pwr_domain field and its con_ids member is used to populate the device's list
+ * Specifically, the pm_domain member of that object is copied to the device's
+ * pm_domain field and its con_ids member is used to populate the device's list
  * of runtime PM clocks, depending on @action.
  *
- * If the device's pwr_domain field is already populated with a value different
+ * If the device's pm_domain field is already populated with a value different
  * from the one stored in the struct pm_clk_notifier_block object, the function
  * does nothing.
  */
@@ -300,14 +300,14 @@  static int pm_runtime_clk_notify(struct
 
 	switch (action) {
 	case BUS_NOTIFY_ADD_DEVICE:
-		if (dev->pwr_domain)
+		if (dev->pm_domain)
 			break;
 
 		error = pm_runtime_clk_init(dev);
 		if (error)
 			break;
 
-		dev->pwr_domain = clknb->pwr_domain;
+		dev->pm_domain = clknb->pm_domain;
 		if (clknb->con_ids[0]) {
 			for (con_id = clknb->con_ids; *con_id; con_id++)
 				pm_runtime_clk_add(dev, *con_id);
@@ -317,10 +317,10 @@  static int pm_runtime_clk_notify(struct
 
 		break;
 	case BUS_NOTIFY_DEL_DEVICE:
-		if (dev->pwr_domain != clknb->pwr_domain)
+		if (dev->pm_domain != clknb->pm_domain)
 			break;
 
-		dev->pwr_domain = NULL;
+		dev->pm_domain = NULL;
 		pm_runtime_clk_destroy(dev);
 		break;
 	}
Index: linux-2.6/drivers/base/power/main.c
===================================================================
--- linux-2.6.orig/drivers/base/power/main.c
+++ linux-2.6/drivers/base/power/main.c
@@ -424,9 +424,9 @@  static int device_resume_noirq(struct de
 	TRACE_DEVICE(dev);
 	TRACE_RESUME(0);
 
-	if (dev->pwr_domain) {
+	if (dev->pm_domain) {
 		pm_dev_dbg(dev, state, "EARLY power domain ");
-		error = pm_noirq_op(dev, &dev->pwr_domain->ops, state);
+		error = pm_noirq_op(dev, &dev->pm_domain->ops, state);
 	} else if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "EARLY type ");
 		error = pm_noirq_op(dev, dev->type->pm, state);
@@ -513,9 +513,9 @@  static int device_resume(struct device *
 
 	dev->power.in_suspend = false;
 
-	if (dev->pwr_domain) {
+	if (dev->pm_domain) {
 		pm_dev_dbg(dev, state, "power domain ");
-		error = pm_op(dev, &dev->pwr_domain->ops, state);
+		error = pm_op(dev, &dev->pm_domain->ops, state);
 		goto End;
 	}
 
@@ -630,10 +630,10 @@  static void device_complete(struct devic
 {
 	device_lock(dev);
 
-	if (dev->pwr_domain) {
+	if (dev->pm_domain) {
 		pm_dev_dbg(dev, state, "completing power domain ");
-		if (dev->pwr_domain->ops.complete)
-			dev->pwr_domain->ops.complete(dev);
+		if (dev->pm_domain->ops.complete)
+			dev->pm_domain->ops.complete(dev);
 	} else if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "completing type ");
 		if (dev->type->pm->complete)
@@ -733,9 +733,9 @@  static int device_suspend_noirq(struct d
 {
 	int error;
 
-	if (dev->pwr_domain) {
+	if (dev->pm_domain) {
 		pm_dev_dbg(dev, state, "LATE power domain ");
-		error = pm_noirq_op(dev, &dev->pwr_domain->ops, state);
+		error = pm_noirq_op(dev, &dev->pm_domain->ops, state);
 		if (error)
 			return error;
 	} else if (dev->type && dev->type->pm) {
@@ -842,9 +842,9 @@  static int __device_suspend(struct devic
 		goto End;
 	}
 
-	if (dev->pwr_domain) {
+	if (dev->pm_domain) {
 		pm_dev_dbg(dev, state, "power domain ");
-		error = pm_op(dev, &dev->pwr_domain->ops, state);
+		error = pm_op(dev, &dev->pm_domain->ops, state);
 		goto End;
 	}
 
@@ -968,11 +968,11 @@  static int device_prepare(struct device
 
 	device_lock(dev);
 
-	if (dev->pwr_domain) {
+	if (dev->pm_domain) {
 		pm_dev_dbg(dev, state, "preparing power domain ");
-		if (dev->pwr_domain->ops.prepare)
-			error = dev->pwr_domain->ops.prepare(dev);
-		suspend_report_result(dev->pwr_domain->ops.prepare, error);
+		if (dev->pm_domain->ops.prepare)
+			error = dev->pm_domain->ops.prepare(dev);
+		suspend_report_result(dev->pm_domain->ops.prepare, error);
 		if (error)
 			goto End;
 	} else if (dev->type && dev->type->pm) {
Index: linux-2.6/drivers/base/power/runtime.c
===================================================================
--- linux-2.6.orig/drivers/base/power/runtime.c
+++ linux-2.6/drivers/base/power/runtime.c
@@ -213,8 +213,8 @@  static int rpm_idle(struct device *dev,
 
 	dev->power.idle_notification = true;
 
-	if (dev->pwr_domain)
-		callback = dev->pwr_domain->ops.runtime_idle;
+	if (dev->pm_domain)
+		callback = dev->pm_domain->ops.runtime_idle;
 	else if (dev->type && dev->type->pm)
 		callback = dev->type->pm->runtime_idle;
 	else if (dev->class && dev->class->pm)
@@ -374,8 +374,8 @@  static int rpm_suspend(struct device *de
 
 	__update_runtime_status(dev, RPM_SUSPENDING);
 
-	if (dev->pwr_domain)
-		callback = dev->pwr_domain->ops.runtime_suspend;
+	if (dev->pm_domain)
+		callback = dev->pm_domain->ops.runtime_suspend;
 	else if (dev->type && dev->type->pm)
 		callback = dev->type->pm->runtime_suspend;
 	else if (dev->class && dev->class->pm)
@@ -573,8 +573,8 @@  static int rpm_resume(struct device *dev
 
 	__update_runtime_status(dev, RPM_RESUMING);
 
-	if (dev->pwr_domain)
-		callback = dev->pwr_domain->ops.runtime_resume;
+	if (dev->pm_domain)
+		callback = dev->pm_domain->ops.runtime_resume;
 	else if (dev->type && dev->type->pm)
 		callback = dev->type->pm->runtime_resume;
 	else if (dev->class && dev->class->pm)