===================================================================
@@ -1407,8 +1407,15 @@ static struct i2c_board_info i2c1_device
#define GPIO_PORT168CR 0xE60520A8
#define SRCR4 0xe61580bc
#define USCCR1 0xE6058144
+#define DEV_LATENCY_NS 250000
static void __init mackerel_init(void)
{
+ struct gpd_timing_data latencies = {
+ .stop_latency_ns = DEV_LATENCY_NS,
+ .start_latency_ns = DEV_LATENCY_NS,
+ .save_state_latency_ns = DEV_LATENCY_NS,
+ .restore_state_latency_ns = DEV_LATENCY_NS,
+ };
u32 srcr4;
struct clk *clk;
@@ -1623,20 +1630,20 @@ static void __init mackerel_init(void)
platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
- rmobile_add_device_to_domain("A4LC", &lcdc_device);
- rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
- rmobile_add_device_to_domain("A4LC", &meram_device);
- rmobile_add_device_to_domain("A4MP", &fsi_device);
- rmobile_add_device_to_domain("A3SP", &usbhs0_device);
- rmobile_add_device_to_domain("A3SP", &usbhs1_device);
- rmobile_add_device_to_domain("A3SP", &nand_flash_device);
- rmobile_add_device_to_domain("A3SP", &sh_mmcif_device);
- rmobile_add_device_to_domain("A3SP", &sdhi0_device);
+ rmobile_add_device_to_domain_td("A4LC", &lcdc_device, &latencies);
+ rmobile_add_device_to_domain_td("A4LC", &hdmi_lcdc_device, &latencies);
+ rmobile_add_device_to_domain_td("A4LC", &meram_device, &latencies);
+ rmobile_add_device_to_domain_td("A4MP", &fsi_device, &latencies);
+ rmobile_add_device_to_domain_td("A3SP", &usbhs0_device, &latencies);
+ rmobile_add_device_to_domain_td("A3SP", &usbhs1_device, &latencies);
+ rmobile_add_device_to_domain_td("A3SP", &nand_flash_device, &latencies);
+ rmobile_add_device_to_domain_td("A3SP", &sh_mmcif_device, &latencies);
+ rmobile_add_device_to_domain_td("A3SP", &sdhi0_device, &latencies);
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
- rmobile_add_device_to_domain("A3SP", &sdhi1_device);
+ rmobile_add_device_to_domain_td("A3SP", &sdhi1_device, &latencies);
#endif
- rmobile_add_device_to_domain("A3SP", &sdhi2_device);
- rmobile_add_device_to_domain("A4R", &ceu_device);
+ rmobile_add_device_to_domain_td("A3SP", &sdhi2_device, &latencies);
+ rmobile_add_device_to_domain_td("A4R", &ceu_device, &latencies);
hdmi_init_pm_clock();
sh7372_pm_init();
The results of adaptive latency computations in GENPD_DEV_TIMED_CALLBACK() show that the start/stop and save/restore state latencies of all devices on the Mackerel board I have tried are a little below 250 us. Therefore, if the 250 us is used as the common initial value of the latency fields in struct gpd_timing_data for all devices on Mackerel, the latency values will never have to change at run time and there won't be any overhead related to re-computation of the corresponding PM QoS data. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> --- arch/arm/mach-shmobile/board-mackerel.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html