[v5,9/9] rcar-phy: handle platform data

Commit Message

Sergei Shtylyov April 19, 2013, 10:04 p.m. UTC

Set the USBPCTRL0 register from the passed platform data in rcar_usb_phy_init();
don't reset it to 0 in  rcar_usb_phy_shutdown()  anymore as that does not make
sense.  Also, don't allow the driver's probe to succeed when the platform data
are not supplied with a device.

The patch has been tested on the Marzen and BOCK-W boards.

Signed-off-by: Sergei Shtylyov <[e-mail]>
Acked-by: Kuninori Morimoto <[e-mail]>
Acked-by: Simon Horman <[e-mail]>

---
Changes since version 3:
- moved USBPCTRL0 register bit #define's from patch #7, removing the prefixes;
- implemented parsing of the platform data to set USBPCTRL0 register.

Changes since version 2:
- added a note about testing to the changelog;
- added ACKs from Simon Horman and Kuninori Morimoto.

 drivers/usb/phy/rcar-phy.c |   53 +++++++++++++++++++++++++++++++++++++++------
 1 file changed, 46 insertions(+), 7 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

Index: renesas/drivers/usb/phy/rcar-phy.c
===================================================================
--- renesas.orig/drivers/usb/phy/rcar-phy.c
+++ renesas/drivers/usb/phy/rcar-phy.c
@@ -1,8 +1,9 @@ 
 /*
  * Renesas R-Car USB phy driver
  *
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
  * Kuninori Morimoto <[e-mail]>
+ * Copyright (C) 2013 Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,10 +12,11 @@ 
 
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/usb/otg.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/rcar-phy.h>
 
 /* REGS block */
 #define USBPCTRL0	0x00
@@ -24,6 +26,25 @@ 
 #define USBOH0		0x1C
 #define USBCTL0		0x58
 
+/* USBPCTRL0 */
+#define OVC2		(1 << 10) /* Switches the OVC input pin for port 2: */
+				/* 1: USB_OVC2, 0: OVC2			*/
+#define OVC1_VBUS1	(1 << 9) /* Switches the OVC input pin for port 1: */
+				/* 1: USB_OVC1, 0: OVC1/VBUS1		*/
+				/* Function mode: set to 0		*/
+#define OVC0		(1 << 8) /* Switches the OVC input pin for port 0: */
+				/* 1: USB_OVC0 pin, 0: OVC0		*/
+#define OVC2_ACT 	(1 << 6) /* Host mode: OVC2 polarity:		*/
+				/* 1: active-high, 0: active-low	*/
+#define PENC		(1 << 4) /* Function mode: output level of PENC1 pin: */
+				/* 1: high, 0: low			*/
+#define OVC0_ACT 	(1 << 3) /* Host mode: OVC0 polarity:		*/
+				/* 1: active-high, 0: active-low	*/
+#define OVC1_ACT	(1 << 1) /* Host mode: OVC1 polarity:		*/
+				/* 1: active-high, 0: active-low	*/
+				/* Function mode: be sure to set to 1	*/
+#define PORT1		(1 << 0) /* Selects port 1 mode:		*/
+				/* 1: function, 0: host			*/
 /* USBPCTRL1 */
 #define PHY_RST		(1 << 2)
 #define PLL_ENB		(1 << 1)
@@ -55,7 +76,9 @@  static int rcar_usb_phy_init(struct usb_
 {
 	struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
 	struct device *dev = phy->dev;
+	struct rcar_phy_platform_data *pdata = dev->platform_data;
 	void __iomem *reg0 = priv->reg0;
+	const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT };
 	int i;
 	u32 val;
 	unsigned long flags;
@@ -89,8 +112,21 @@  static int rcar_usb_phy_init(struct usb_
 		/* (4) USB-PHY reset clear */
 		iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
 
-		/* set platform specific port settings */
-		iowrite32(0x00000000, (reg0 + USBPCTRL0));
+		/* Board specific port settings */
+		val = 0;
+		if (pdata->port1_func)
+			val |= PORT1;
+		if (pdata->penc1)
+			val |= PENC;
+		for (i = 0; i < 3; i++) {
+			/* OVCn bits follow each other in the right order */
+			if (pdata->ovc_pin[i].select_3_3v)
+				val |= OVC0 << i;
+			/* OVCn_ACT bits are spaced by irregular intervals */
+			if (pdata->ovc_pin[i].active_high)
+				val |= ovcn_act[i];
+		}
+		iowrite32(val, (reg0 + USBPCTRL0));
 
 		/*
 		 * Bus alignment settings
@@ -117,10 +153,8 @@  static void rcar_usb_phy_shutdown(struct
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	if (priv->counter-- == 1) { /* last user */
-		iowrite32(0x00000000, (reg0 + USBPCTRL0));
+	if (priv->counter-- == 1)	/* last user */
 		iowrite32(0x00000000, (reg0 + USBPCTRL1));
-	}
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
@@ -133,6 +167,11 @@  static int rcar_usb_phy_probe(struct pla
 	void __iomem *reg0;
 	int ret;
 
+	if (!pdev->dev.platform_data) {
+		dev_err(dev, "No platform data\n");
+		return -EINVAL;
+	}
+
 	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res0) {
 		dev_err(dev, "Not enough platform resources\n");