diff mbox

[v2,2/2] ARM: shmobile: lager: add Ether DT support

Message ID 201402200222.32265.sergei.shtylyov@cogentembedded.com (mailing list archive)
State Accepted
Commit da4ea9514df42f69ec42a098142aaeac8c101da5
Headers show

Commit Message

Sergei Shtylyov Feb. 19, 2014, 11:22 p.m. UTC 
Define the Lager board dependent part of the Ether device node. 

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- moved PHY pin node phandle from PHY device node to the Ether device node, thus
  removing all pin control properties from the PHY node;
- resolved reject.

 arch/arm/boot/dts/r8a7790-lager.dts |   28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

Index: renesas/arch/arm/boot/dts/r8a7790-lager.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7790-lager.dts
+++ renesas/arch/arm/boot/dts/r8a7790-lager.dts
@@ -1,7 +1,8 @@ 
 /*
  * Device Tree Source for the Lager board
  *
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -124,6 +125,16 @@ 
 		renesas,function = "scif0";
 	};
 
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
 	scif1_pins: serial1 {
 		renesas,groups = "scif1_data";
 		renesas,function = "scif1";
@@ -150,6 +161,21 @@ 
 	};
 };
 
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "ok";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &mmcif1 {
 	pinctrl-0 = <&mmc1_pins>;
 	pinctrl-names = "default";