===================================================================
@@ -596,15 +596,34 @@
status = "disabled";
};
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "usb_extal";
+ };
+
+ /* External CAN clock */
+ can_clk: can_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overriden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "can_clk";
+ status = "disabled";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7791-cpg-clocks",
"renesas,rcar-gen2-cpg-clocks";
reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>;
+ clocks = <&extal_clk &usb_extal_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0", "pll1", "pll3",
- "lb", "qspi", "sdh", "sd0", "z";
+ "lb", "qspi", "sdh", "sd0", "z",
+ "rcan";
};
/* Variable factor clocks */
===================================================================
@@ -20,6 +20,7 @@
#define R8A7791_CLK_SDH 6
#define R8A7791_CLK_SD0 7
#define R8A7791_CLK_Z 8
+#define R8A7791_CLK_RCAN 9
/* MSTP0 */
#define R8A7791_CLK_MSIOF0 0
The R-Car CAN controllers can derive the CAN bus clock not only from their peripheral clock input (clkp1) but also from the other internal clock (clkp2) and external clock fed on CAN_CLK pin. Describe those clocks in the device tree, along with the USB_EXTAL clock from which clkp2 is derived. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- Changes in version 3: - new patch. arch/arm/boot/dts/r8a7791.dtsi | 23 +++++++++++++++++++++-- include/dt-bindings/clock/r8a7791-clock.h | 1 + 2 files changed, 22 insertions(+), 2 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html